Samsung Plasma HDTV PN60E8000 User Manual

bottom of the screen may cause 
image retention (screen burn) which 
is not covered by the warranty.
Screen Fit: When your TV inputs HDMI 
(720p / 1080i / 1080p) or Component 
(1080i / 1080p) signals, displays the full 
image without any cut-off. Smart View 1: Reduces the 16:9 picture 
by 50%. 
 for LED TV 
Smart View 2: Reduces the 16:9 picture 
by 25%. 
 for LED TV  

 
NSmart View 1 is enabled only in 
HDMI mode.
 
NSmart View 2 is enabled only in 
HDMI or DTV mode.
 
NThe picture size can vary depending 
on the input resolution when you 
play content from Videos in  AllShare 
Play .
 
●Position
Adjusts the picture position.  Position 
is only available if Picture Size is set to  

Zoom1, Zoom2, Wide Fit, or Screen Fit.
 
NIn DTV mode, Position is not 
available when Picture Size is set to 
Screen Fit.
To use the Position function after 
selecting Zoom1, Zoom2, Wide Fit or 
Screen Fit, follow these steps: 1.  
Select  the  Position.
2.  
On  the  Position screen, select 
Position, and then move the picture 
to position you want using your  

remote.
3.  
When done, select Position again, 
and then select Close.
 
NTo reset the picture position, 
select  Reset.
Picture Sizes available by Input Source:  
– ATV, AV: 
16:9, Zoom1, Zoom2, 4:3
 
– Component (480i, 480p): 
16:9, 
Zoom1, Zoom2, 4:3
 
– DTV (720p): 
16:9, Wide Fit, 4:3, 
Smart View 2 
 for LED TV  

 
– DTV (1080i, 1080p): 
16:9, Wide Fit, 
4:3, Screen Fit, Smart View 2 
 for LED 
TV
 
– Component(720p): 
16:9, Wide Fit,  4:3
 
– Component(1080i, 1080p): 
16:9, Wide 
Fit, 4:3, Screen Fit
 
– HDMI (720p, 1080i, 1080p): 
16:9, 
Wide Fit, 4:3, Screen Fit, Smart View 
1 
 for LED TV , Smart View 2  for LED TV 
 
NDepending on the input source, the 
picture size options may vary. 

 
NThe available items may differ 
depending on the selected mode.
 
NHD (High Definition): 16:9 - 
1080i/1080p (1920x1080), 720p 
(1280x720)
 
NYou can adjust and store settings 
for each external device you have 
connected to an input on the TV. 

Changing the Picture OptionsAdvanced Settings
Menu  → Picture 
→ Advanced Settings
Using this function, you can configure 
advanced picture settings to create 
your preferred picture.
 
NAdvanced Settings is available only 
when the Picture Mode is set to 
Standard  or Movie  mode.
 
NWhen connecting a PC using the 
HDMI-DVI cable, you can only  

make changes to White Balance and 
Gamma .
 
●Dynamic Contrast
Adjusts the screen contrast.
 
●Black Tone
Darker settings make blacks look 
darker.
 
●Flesh Tone
Adjusts the amount of red in skin 
tones.
 
●RGB Only Mode 

Displays the Red, Green  and Blue colors 
so you can make fine adjustments to 
hue and saturation.
 
●Color Space
Adjusts the range and variety of colors 
(the color space) available to create 
images.
 
NTo adjust Color , Red, Green , Blue and 
Reset , set the Color Space to Custom.
 
●White Balance
Adjusts the color temperature of the  

picture so that white objects look white 
(instead of, for example, slightly pink or 
slightly yellow) and the overall color of 
the picture looks natural.
R-Offset / G-Offset /  B-Offset: Adjusts 
each color’s (red, green, blue) darkness.
R-Gain  / G-Gain  / B-Gain: Adjusts each 
color’s (red, green, blue) brightness.
Reset : Resets the White Balance to it’s 
default settings.
 
●10p White Balance