Samsung NP-P430C User Manual

111
 System Software function
	 You	can	back	up	the	System	Software	saved	on	the	hard	disk	to	another	hard	disk	drive	or	DVD,	and	reinstall	part	or	
all	software	programs	to	your	computer.
System Software function
This	function	installs	the	system	software	
programs	needed	for	your	computer System Software Installation
T
 his	function	backs	up	all	System	Software	
Programs System Software Backup
	 The	system	software	function	is	supported	by	Samsung Recover y Solution	
version	4	or	later.	Therefore,...

11
Restore Function
Not	only	can	you	use	Samsung	Recovery	Solution	when	Windows	is	running,	but	also	when	you	are	unable	to	boot	up	
into	Windows.	Let’s	learn	how	to	use	Samsung	Recovery	Solution.	Some	models	provide	a	backup	image	of	the	initial	
state	and	do	not	provide	partitioning.
Partition Setup & Initial Status Backup
If you turn your computer on for the first time, the Initial 
Status	Backup	function	is	performed	after	registering	
Windows.	This	function	saves	an	image	of	the	Initial	
Status...

113
Restoring the computer
Restore	is	a	function	that	enables	restoring	the	computer	
to	a	saved	point	when	the	computer	was	purchased	or	a	
user-saved	point.
The	Restore	function	provides	the	Basic	Restore	and	
Complete	Restore	options.
1
	– When Windows is running:
				 Cl
ick	Start > All Programs > Samsung > 
Samsung Recovery Solution > Samsung 
Recovery Solution .
 
– When Windows does not start:
				Turn	the	computer	on	and	press	the	 F4	
key	when	
the	boot	screen	(SAMSUNG	logo)	appears.	After	
a...

114
		3-1 		If	you	have	selected	 Basic Restore:
		 In
	the	Basic	Restore	screen,	click	the	 Next	
button.	
The	system	will	be	restarted.
		3-2 		 If
	you	have	selected	 Complete Restore :
		 In
	the	restoration	point	selection	screen,	select	
the	restoration	point	described	as	‘Computer	Initial	
Status’	and	click	the	 Next	
button.	The	system	will	be	
restarted.
In	the	Advanced	 menu,	you	can	change	the	size	of	the	
hard	drive	partitions	(e.g.	C:	and	D:).
	 Make	sure	to	backup	your	data	in	advance,	as...

115
Backup Function
Complete Backup/Restore
A	Complete Backup	saves	the	complete	image	of	the	C	
drive	onto	another	drive	or	DVD.	A	Complete Restore 	
restores the image file saved by the Complete Backup 
o
 nto	the	C	drive.
  Complete Backup
If	you	run	Complete	Backup	using	a	DVD,	you	can	
restore	the	computer	even	when	a	problem	occurs	with	
the	hard	disk	or	when	the	restoration	area	is	removed.
1
	 Click	 Start > All Programs > Samsung > 
Samsung Recovery  Solution > Samsung 
Recovery Solution .
2...

11
6
	 The	Complete	Backup	begins.	If	multiple	DVDs	are	
required,	the	expected	number	of	DVDs	is	displayed	
in	the	progress	screen.	Whenever	burning	a	DVD	
is	completed,	the	“Insert	the	next	DVD”	message	
will	appear.	Continue	the	backup	according	to	the	
instructions.
7
	 When	the	‘Restart	the	System’	message	appears	 after	the	backup	is	complete,	click	 OK	
to	restart	the	
system.
  Complete Restore
1
	– When backing up onto DVD
				 T
urn	the	computer	on	and	insert	the	backup	DVD	
into	the	DVD...

117
6
	 When	the	‘Restart	the	System’	message	appears	after	the	restoration	is	complete,	click	 OK	
to	restart	
the	system.	The	Complete	Restore	has	been	
completed.
Data Backup/Restore
Data Backup enables you to save specific files or folders 
o
nto	another	drive	or	DVD.	 Data Restore	
enables	you	to	
restore	data	using	the	data	saved	by	a	Data	Backup	when	
data	is	lost.	This	guide	describes	the	Backup	and	Restore	
procedures	on	the	basis	of	backing	up	and	restoring	by	
using	DVD.
  Data Backup
1...

118
 Data Restore
1
	– When backing up onto DVD
				 T
urn	the	computer	on	and	insert	the	backup	DVD	
into	the	DVD	drive.
 
–   When backing up to another drive
				 Proceed	to	Step	 .
2
	 Click	Start > All Programs > Samsung > 
Samsung Recovery Solution > Samsung 
Recovery Solution .
When	you	cannot	start	Windows,	turn	the	computer	
on	and	press	the	F4	
key	in	the	boot	screen	to	enter	
restoration	mode.
3
	 When	the	initial	menu	screen	appears,	click	 Restore	
a
nd	then	click	 Data Restore .
4...

119
System Software Function
Using System Software
The	System	Software	function	is	a	function	that	enables	
you	to	reinstall	device	drivers	and	System	Software	
Programs	or	back	up	those	programs.	
The	system	software	function	is	supported	by	
Samsung Recover y Solution	
version	4	or	later.	
Therefore,	the	function	may	not	be	supported	
depending	on	the	version.
The	System	Software	Installation	Function	only	works	
in	Microsoft	Windows.
  Installing System Software
1
	 Click	 Start > All Programs >...

1 0
  System Software Backup
1
	 Click	 Start > All Programs > Samsung > 
Samsung Recovery Solution > Samsung 
Recovery Solution.
2
	 When	the	initial	menu	screen	appears,	click	 System 
Software > System Software Backup.
3
	 Specify	the	Save	Path.	If	your	computer	has	a	DVD- Writer,	you	can	specify	the	DVD	drive	as	the	Save	
Path.
Select Drive D.Select the DVD drive.
If you have specified a hard disk drive or a removable 
disk	as	the	Save	Path,	the	 SamsungSoftware	
folder	
is created on the...