Samsung ML 4050N User Manual

1.2   
Save time and money
• This printer allows you to use toner save mode to save toner. See page 2.6.
• You can print on both sides of the paper to save  paper ( double-sided printing ).
• You can print multiple pages on a single sheet of  paper to save paper ( N-Up printing). See the 
Software section .
• You can use preprinted forms and letterhead with  plain paper. See the  Software section.
• This printer automatically  conserves electricity 
by substantially reducing power consumption 
when not...

1.3   
Printer overview
Front view
1
output tray8 handle
2control panel9 paper level indicator
3control board cover10 multi-purpose tray
4
tray 111 top cover
5optional tray 2 12 output support
6optional tray 313 multi-purpose tray 
paper width guides
7optional tray 414 multi-purpose tray 
extension
* The figure above shows an  ML-4050N with 
all available options.
Rear view
1 power switch5 parallel port
2rear cover6 USB port
3duplex unit7 network port
4
power receptacle
* The figure above shows an...

1.4   
Control panel overview
1 Menu
: Enters Menu mode and scrolls through the available 
menus.
2 Scroll
 buttons: Scroll through the options available in the 
selected menu, and increase or decrease values.
3 OK: Confirms the selection on the display.
4
Back: Sends you back to the upper menu level.
5 Toner Save
: Allows you to save on toner by using less toner 
in printing. See page 2.6.
6 Demo : Prints a demo page.
7
Stop: Stops an operation at any time.
8
Status : Indicates the status of your...

1.5   
Selecting a location
Select a level, stable place with adequa te space for air circulation. Allow 
extra space for opening covers and trays. 
The area should be well-ventilated and  away from direct sunlight or 
sources of heat, cold, and humidity.  Do not set the printer close to the 
edge of your desk or table.
Clearance space
Front : 482.6 mm (enough 
space so that trays can be 
opened or removed)
Back : 320 mm (enough space 
to allow opening of the rear 
cover or the duplex unit)
Right : 100...

2.1   
2 System setup
This chapter shows menus you can set and provides basic settings for 
your printer. 
This chapter includes:
• Using control panel menus
• Menu overview
• Printing a demo page
• Changing the display language
• Using toner save mode
Using control panel menus 
A number of menus are available to  make it easy for you to change the 
printer settings. The diagram on the next column shows the menus and 
all of the menu items available in  each menu. The items in each menu 
and the options...

2.2   
Menu overview 
The control panel menus are used to configure the printer. The control 
panel provides access to the foling menus.
The menus in the colored characters appear only when the optional 
items are installed. 
a. Available with an optional hard disk.
b. Available with an optional duplex unit. 
(For ML-4050ND, the duplex unit is provided as a default.)
c. Available with optional wireless network interface.
0.Job Manage.a
(See page 10.7.)
Active Job
Store Job
2. Layout
(See page 2.3.)...

2.3   
Layout menu
Use the  Layout menu to define all settings relating to output.
ItemExplanation
Orientation Choose the default orient ation of the print image 
on the page. 
Simplex 
Margin Set the margin of print materials for one-sided 
printing. You can increase or decrease the value in 
0.1 mm increments.
•
To p  M a r g i n : Set the top margin.
• Left Margin : Set the left margin. 
Duplex To print on both sides of paper, choose the binding 
edge as follows.
•
Long Edge: Flip on the long edge....

2.4   
Graphic menu
Use the  Graphic  menu to change settings affecting the quality of the 
printed characters and images.
System Setup menu
Use the  System Setup  menu to configure a vari ety of printer features.
ItemExplanation
Resolution Specify the number of dots printed per inch (dpi). 
The higher the setting, the sharper printed 
characters and graphics.
• If your print jobs ar e mostly text, select 
600dpi-
Normal
 for the highest quality printing. 
•Select 
1200dpi-Best when your job contains...

2.5   
Emulation menu
Use the  Emulation  menu to configure printer language emulation.
PCL
This menu sets the PCL emulation configuration. You can set the font 
type, symbol type, lines per page, and font size. 
ItemExplanation
Emulation 
Ty p e The printer language defines how the computer 
communicates with the printer. 
If you select 
Auto, your printer can change the 
printer language automatically.
Setup See the following tables to  configure properties of the 
printer language.
ItemExplanation
Ty...

2.6   
Network menu
This menu lets you configure the network interface installed in your 
printer. You can reset the network interface and print a configuration 
page. For details, see page 4.1.
ItemExplanation
TCP/IP This item allows you to manually set the TCP/IP 
addresses or receive the addresses from the 
network.
•DHCP : The DHCP server allots the IP address to 
you automatically.
• BOOTP : The BOOTP server allots the IP address 
to you automatically. 
• Static : You can enter IP Address, Subnet...