Samsung LN-S5797D Lcd Tv Owners Guide

English-39
Checking the Digital-Signal Strength
Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect 
reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel.
You can, however, adjust your antenna to improve the reception of available digital channels.
1
Press the MENUbutton.
Press the  or  button to select “Channel”, 
then press the 
ENTERbutton.
2
Press the  or...

English-40
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception 
(a low-noise preamplifier boosts the incoming signal).
1
Press the MENUbutton.
Press the  or  button to select “Channel”, 
then press the 
ENTERbutton.
2
Press the  or  button to select “LNA”, 
then press the 
ENTERbutton. 
3
Press the or  button to select “On” or “Off”, 
then press the 
ENTERbutton.
Select “Return” by pressing the  or  button, 
then press the...

English-41
Picture Control
You can select the type of picture which best corresponds to your viewing requirements.
Picture Control
1
Press the MENUbutton.
Press the  or  button to select “Picture”, 
then press the 
ENTERbutton.
2
Press the  or  button to select “Mode”, 
then press the 
ENTERbutton.
Press the  or  button again to select 
“Mode”, then press the 
ENTERbutton.
3
Press the  or  button to select the desired 
picture mode (Dynamic, Standard, Movie, Custom), 
then press the 
ENTERbutton....

English-42
Customizing the Picture Settings
You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”,  “Tint”, and “Color Tone” 
according to personal preference. You can select “Standard” which automatically recalls your personalized picture settings.
1
Press the MENUbutton.
Press the  or  button to select “Picture”, 
then press the 
ENTERbutton.
2
Press the  or  button to select “Mode”, 
then press the 
ENTERbutton.
Press the  or  button again to select
“Mode”, then...

English-43
5
Press the ENTERbutton to return to “Mode”.
Press the  or  button to select “Color Tone”, then press the 
ENTERbutton.
6
Press the  or  button to select a particular item (Cool2, Cool1, 
Normal, Warm1, or Warm2), then press the 
ENTERbutton.
7
To return the factory defaults, select “Reset” by pressing the 
or  button. Press the 
ENTERbutton.
Press the  or  button to select “OK” or “Cancel”, then press
the 
ENTERbutton.
Select “Return” by pressing the  or  button, then press the
ENTERbutton to...

English-44
Changing the Picture Size
You can select the picture size which best corresponds to your viewing requirements.
1
Press the MENUbutton.
Press the  or  button to select “Picture”, 
then press the 
ENTERbutton. 
Press the  or  button to select “Size”, 
then press the 
ENTERbutton.
2
Press the  or  buttons to select the 
screen format you want.
Press the 
ENTERbutton.
Press the 
EXITbutton to exit.
3
Press the  or  buttons to select “Zoom1”.
Press the 
ENTERbutton.
4
After selecting Position, use...

English-45
Using the Color Weakness Enhancement Feature
This feature adjusts the Red, Green or Blue color to compensate for the user’s particular color weakness.
1
Press the MENUbutton.
Press the  or  button to select “Setup”, 
then press the 
ENTERbutton.
2
Press the  or  button to select “Color 
Weakness”, then press the 
ENTERbutton.
3
Press the  or  button to select “Color 
Weakness”, then press the 
ENTERbutton.
Press the  or  button to select “On”, then 
press the 
ENTERbutton. 
4
Press the  or...

English-46
Digital Noise Reduction
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce 
any static and ghosting that may appear on the screen.
1
Press the MENUbutton.
Press the  or  button to select “Picture”, 
then press the 
ENTERbutton.
2
Press the  or  button to select “Digital NR”, 
then press the 
ENTERbutton.
3
Press the  or  button to select “Off” or “On”, 
then press the 
ENTERbutton.
Select “Return” by pressing the 
or...

English-47
DNIe (Digital Natural Image engine)
This TV includes the DNIe function to provide high visual quality. If you set DNIe to On, you can view the screen with the DNIe
feature activated. pictures on the screen simultaneously, for demonstration purposes. Using this function, you can view the difference 
in the visual quality.
1
Press the MENUbutton.
Press the  or  button to select “Picture”, 
then press the 
ENTERbutton.
2
Press the  or  button to select “DNIe”, then 
press the 
ENTERbutton.
3...

English-48
Setting the Film Mode
You can automatically sense and process film signals from all sources and adjust the picture for optimum quality.
1
Press the MENUbutton.
Press the  or  button to select “Picture”, 
then press the 
ENTERbutton.
2
Press the  or  button to select “Film Mode”,
then press the 
ENTERbutton.
3
Press the  or  button to select “Off” or “On”,
then press the 
ENTERbutton.
Select “Return” by pressing the  or  button,
then press the 
ENTERbutton to return to the 
previous menu.
Press...