Samsung LN-S4096D, LN-S4696D, LN-S5296D TFT-LCD TELEVISION Owners Instructions

English-99
Control Panel Images for Each Device
DTV Control Panel Image
Cable STB Control Panel Image
AV-HDD Control Panel Image
When the Power is off.
AV-HDD Control Panel Image
When the Power changes.
AV-HDD Control Panel Image
When Playing.
AV-HDD Control Panel Image
When Recording.
Camcorder Control Panel Image
When in CAMERA Mode.
Camcorder Control Panel Image
When recording in CAMERA Mode.
Camcorder Control Panel Image
When in VCR Mode.
Camcorder Control Panel Image
When playing in VCR Mode.
The...

English-100
Operating Tips
1)  When the screen is switched to the TV program. 
- When you select the first button, the DTV button, in the Device List, it switches to the TV program. 
- Although you have selected another device from the Device List, if detecting a video signal from 
the device fails, the “Connection failed” message appears and the screen automatically switches 
to the TV program.
- When the 1394 connection to the selected device is disconnected, the screen automatically
switches to the TV...

English-101
10) When multiple devices are connected, some devices may appear and then disappear periodically in the Device List. 
This is because some devices malfunction when multiple devices are connected.
If this occurs, you have to discover and remove the defective device from the connection by removing the 
devices one by one.  
11) When multiple devices are connected, the response time may be relatively long when selecting a device. 
This may happen when there is a device(s) that malfunctions and...

English-102
Recording Tips
In this case, the selected file is automatically played and displayed on the TV screen and the target device 
automatically starts recording. 
Controlling a device with another device's remote control or through manual operation, may cause a malfunction 
when controlling a device through the TV. When copying a file, the recording will stop automatically when the 
file reaches its end.
Although you can make a recording to connected devices regardless of copy protection, you...

English-103
Tips on stopping recording
1
In general, you can instantly evaluate the current
recording device through the Target List. 
If you select a device that you wish to stop, a message
appears asking if you really want to stop recording. 
2
For D-VHS. If you select a recording D-VHS from the Device 
List, a message appears asking if you really want to stop 
recording. When the “OK” button is selected, the recording is 
stopped and the D-VHS screen appears. 
When the “Cancel” button is selected, the...

English-104
File List
1
Press the D-Net button on the remote control.
3
Press the  or 
button to move to the File List button
and then press the 
ENTERor button.
The Control Panel disappears and the file list appears
which allows you to identify a current recording or 
playing device. However, when playing a file that is 
currently being recorded in Time-Shift Mode, only the
Record icon appears. 
4
Press the  or 
button to move to a file and then press 
the 
ENTERor button.
The sub-menu appears allowing...

English-105
6
To move to the list on the next page, move the cursor to the file at the bottom and press the  button; to move to
the previous page, move the cursor to the Previous Menu and press the  button. When pressing the  button
while the first file on the first page is selected, the cursor moves to the last file on the last page. When pressing the
button while the last file on the last page is selected, the cursor moves to the first file on the first page. 
To move to the previous page, press the...

English-106
Troubleshooting (D-Net)
Possible Solution
Only DTVs, STBs, AV-HDDs, D-VHSs and MPEG camcorder
IEEE 1394 devices are controllable.
Other devices will display “UNKNOWN” in the device list. 
Some supported devices may display as “UNKNOWN” 
due to an initialization error.
➔ If a device is supported but is displayed as 
“UNKNOWN”, reconnect the 1394 cable.
If this does not work, this is because the information 
about the device is unreadable due to an internal error.
A device, which has...

English-107
Possible Solution
This message appears when the connection speed of the 
connected device and the device selected from the Target 
List are different when copying data.
➔ Connect a low speed device between the two devices. 
(See figure)
* A 1394 device has a maximum connection speed which will   
be marked near the IEEE 1394 connector with an “S” number 
(i.e., S100,S200,S400). The higher the number, the faster the
maximum connection speed.
This TV has a maximum connection speed of S400.
This...

English-108
Possible Solution
Check if the current mode for DTV and STB is set to analog 
by mistake. For AV-HDD, check if the played content has
reached the end. (Select the item from the content list again.) 
For D-VHS, check if a D-VHS tape is being used. If the 
camcorder supports the DV format, no picture will be 
displayed on the screen.
This message appears when the D-Net function is being 
initialized.
Retry after a short wait to use the D-Net function.
This message appears when the number of...