Samsung LED TV F7100 User Manual

64
Schedule Viewing
Select a program that you wish to view, and then the virtual remote panel's or the regular remote's 
INFO button to display the detailed information screen. Select  Schedule Viewing from the detailed 
information screen to set up a  Schedule Viewing. Schedule Viewing  is only available for programs 
that haven't aired yet.
PDP 5500, LED 6400 series and above
Select the 
{ button on the virtual remote panel and navigate to the Schedule Manager screen to view 
a list of...

6465
Channel List
Screen Menu > Broadcasting > Channel List  Try Now
Launch CH List while watching TV to change channels or to check what's on other channels. Press and 
hold the touch pad. This launches  CH List. Alternatively, press the regular remote's CH LIST button to 
launch the Channel List .
The Channel List screen icons indicate the following:
 
●: An analog channel
 
●: A favorite channel
 
●: A Schedule Viewing reserved channel
 
●: A locked channel
Change Channels
Select a channel to...

66
Change the Broadcast Signal
PDP 5500, LED 6400 series and above
Drag right on the touch pad and then select Air or Cable . This will change the signal source 
immediately.
LED 4300 - 6300 series
Press the right arrow button on the remote and select  Air or Cable . This will change the signal source 
immediately.
Change the Channel List
PDP 5500, LED 6400 series and above
Drag right on the touch pad and then switch to the Added Ch.  or Favorites list. However, the Favorites 
list can only be selected...

6667
Schedule Viewing
Screen Menu > Broadcasting > Schedule Manager  Try Now
Broadcasting
Auto Program
Antenna  Cable
Channel List
Guide
Schedule Manager
Edit Channel
Edit Favorites
 
"The displayed image may differ depending on the model.
Configure the TV to show a specific channel or program at a specific time and date. Before scheduling 
TV watching, make sure that the date and time is set properly under the System >  Time > Clock menu. 
The 
 icon appears next to programs that have been...

68
Guide
From Guide , select a program you wish to view.
Program Info
Select the virtual remote panel's or the regular remote's INFO  button to display information about the 
current program. From the program information screen, drag left/right on the touch pad or press left/
right button on the remote control to select a program that has not yet aired and set up a  Schedule 
Viewing  for it.
Analog Channel Schedule Viewing
The Schedule Viewing function for programs on analog channels can be set...

6869
3D TV
Screen Menu > Picture > 3D
3D
3D Mode 
3D Perspective  0
Depth  5
L/R Change  L/R Image
3D → 2D  Off
 
"The displayed image may differ depending on the model.
This function is available only with PDP 5500 series and LED 6400 series or higher.
This TV is 3D-enabled. For the best 3D viewing experience, users must wear Samsung's 3D Active 
Glasses.
The ideal viewing distance is three times or more the height of the screen. We also recommend sitting 
with your eyes level with the screen....

70
Restrictions
There are several restrictions when using 3D TV:
 
●Running the Smart Hub automatically deactivates 3D viewing.
 
●PIP  cannot be used.
 
●Certain  Picture options are disabled.
 
●IR Type Samsung 3D Active Glasses and third-party 3D glasses are not supported.
Tips
 
●The left and right 3D images may initially overlap when the TV is turned on. It takes a moment 
for the display to optimize and the overlapping to go away.
 
●The 3D Active Glasses may not work properly if there is another...

7071
Activating 3D Mode
Screen Menu >  Picture > 3D > 3D Mode
Choose a 3D mode according to the input signal. Available 3D modes may vary depending on the 
input signal. Some 3D contents may differ preferred 3D mode. In this case, change the desired 3D 
mode for watching. Select a 3D mode from the available 3D modes depending on the input signal. 
Available 3D modes may vary depending on the input signal.
 
● Off: Deactivates 3D viewing.
 
● Normal: Converts normal images to 3D images. Some formats do...

72
PIP
Screen Menu > Picture > PIP Try Now
Picture
3D
PIP  Off
Advanced Settings
Picture Options
Picture Off
Apply Picture Mode  All Sources
Reset Picture
 
"The displayed image may differ depending on the model.
Display video from an external device on the main screen and the TV as a picture-in-picture. For 
example, you can display a Blu-ray movie on the main screen and simultaneously watch TV as a 
picture-in-picture. PIP is not available while the Smart Hub or 3D TV is active. Turning off the TV...

7273
Analog Screen Calibration
Channel Settings
Fine Tune
Clear Scrambled Channel
 
"The displayed image may differ depending on the model.
Analog pictures can become shaky and full of noise. If this happens, you can fine tune the signal 
and/or reduce noise to clear up the picture.
Fine Tune
Screen Menu >  Broadcasting > Channel Settings  > Fine Tune Try Now
Clear up shaky pictures. Fine tune the pictures until they are clear and then select  Save or Close. 
Select  Reset to reset the Fine Tune...