Samsung LE 32C650 User Manual

21English
03
Basic Features
Picture In Picture ( ¦PIP)
PIP t
Watches simultaneously the TV tuner and one external video source. PIP (Picture-in-Picture) does not function in the same mode. 
NOTE ✎
If you turn the T V off while watching in  xPIP mode, the PIP window will disappear.
You may notice that the picture in the PIP window  xbecomes slightly unnatural when you use the main screen to view a game or karaoke.
While  xInternet@TV is in operation, the PIP function cannot be used.
PIP settings x
Main...

22English
Basic Features
By Online ■: Upgrade the software using the Internet.
First, configure your network. For detailed  ✎procedures on using the Network Setup, refer to the “Network Connection” instructions.
If the Internet connection does not operate  ✎properly, the connection may be broken. Please retry downloading. If the problem persists, download by USB and upgrade.
By Channel ■: Upgrade the software using the broadcasting signal.
If the function is selected during the software  ✎transmission...

23English
04
Advanced Features
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1920 X 1080 @ 60 Hz
ModeResolutionHorizontal Frequency (KHz)Vertical Frequency (Hz)Pixel Clock Frequency (MHz)Sync Polarity (H / V)
IBM640 x 35031.46970.08625.175+/-720 x 40031.46970.08728.322-/+
MAC640 x 48035.00066.66730.240-/-832 x 62449.72674.55157.284-/-1152 x 87068.68175.062100.000-/-
VESA CVT
720 x 57635.91059.95032.750-/+1152 x 86453.78359.95981.750-/+1280 x 72056.45674.77795.750-/+1280 x...

24English
Advanced Features
Network Connection
You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection.
Connecting to a Wired Network ¦
You can attach your TV to your LAN using cable in three ways:
You can attach your TV to your LAN by connecting the LAN port on the back\
 of your TV to an external modem using a Cat  yyy5 cable. See the diagram below.
You can attach your TV to your LAN by connecting the LAN port on the back\
 of...

25English
04
Advanced Features
Network Setup (Auto)
Use the Automatic Network Setup when connecting your TV to a network that supports DHCP. To set up your TV’s cable network connection automatically, follow these steps:
How to set up automatically
1.   Connect your TV to your LAN as described in the previous section.
2.   Turn on your TV, press the Menu button on your remote, use the ▲ or ▼ button to select Setup, and then press the ENTERE button.
3.   Use the ▲ or ▼ button to select Network in the...

26English
Advanced Features
Connecting Wireless Network ¦
To connect your TV to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN Adapter (WIS09ABGN), which you connect to your TV’s back or side panel USB jack. See the illustration below.
Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts.com. Samsung’s Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung recommends...

27English
04
Advanced Features
Network Setup  
(Samsung Auto Configuration)
This function is available in APs (Access Points) that support Samsung Auto Configuration. If there is no such AP, you can connect through PBC (WPS) or manually.
This function is available when  ✎SWL(Samsung Wireless Link) set to Off.
You can check for equipment that supports Samsung  ✎Auto Configuration on www.samsung.com.
How to set up using Samsung Auto Configuration
1. Place the AP and TV next to each other and turn them on....

28English
Advanced Features
3.   Press the ▲ button to go to Select a Network, and then press the ENTERE button. The Network function searches for available wireless networks. When done, it displays a list of the available networks.
4.   In the list of networks, press the ▲ or ▼ button to select a network, and then press the ENTERE button.
If the AP is set to Hidden (Invisible), you have  ✎to select Add Network and enter the correct Network Name (SSID) and Security Key to establish the connection.
5....

29English
04
Advanced Features
How to set up manually
To enter the Network settings into your TV, follow these steps:
1.   Follow Steps 1 through 6 in the “How to set up using PBC (WPS)”. (P. 27)
2.   Press the ▼ button to select Internet Protocol Setup, and then press ENTERE button. Press the ▲ or ▼ button to select Manual, and then press ENTERE button.
3.   Press the ▼ button to go to the first entry field (IP Address).
4. Use the number buttons to enter numbers.
5.   When done with each field, use the...

30English
Advanced Features
Media Play
Connecting a  ¦USB Device
1. Turn on your TV.
2. Connect a USB device containing photo, music and/or movie files to the\
 USB 1 (HDD) or USB 2 jack on the side of the TV.
3. When USB is connected to the TV, popup window appears. Then you can select Media Play.
 ¦Connecting to the PC through network
You can play pictures, music and videos saved on your PC or on your TV through a network connection in the Media Play mode.
 
If you use  ✎Media Play through saved file...