Samsung LE 32B653 User Manual

							
1
English
Home Network

Using the Media Function
An alarm window appears informing the user that the media contents (videos, photos, music) sent from the mobile phone will be displayed on the TV.
The contents are played automatically 3 seconds after the alarm window appears.
If you press the RETURN or EXIT button when the alarm window appears, the Media Contents are not played.
To turn off the media contents transmission from the mobile phone, set Media to Off in Setup of the Home Network Centre.
The contents may not be played on the TV depending on their resolution and format.
Media Play Control Buttons
ButtonOperations
◄/►Move the cursor and select an item.
While playing a movie file: Skip forwards or backwards through the movie\
 file.
ENTEREPressing the ENTERE button during play pauses the play.
Pressing the ENTERE button during pause resumes the play.
RETURNReturn to the previous menu.
TOOLSRun various functions from the Photo, Music and Movie menus.
INFOShow file information.
EXITStop Media Play mode and Returns to TV mode.
The ENTERE and ◄/► buttons may not work depending on the type of media content.
Using the mobile device, you can control playing media. For details, ref\
er to each user’s guide. 
■
■
■
■
Media will be played from “111-123 4-5671”

BN68-01900M-01Eng.indb   812009-04-13   �� 10:07:48 
						

							

English
Other Information

Other Information
Teletext Feature
Most television stations provide written information services via Teletext. The index page of the Teletext service gives you information on how to use the service. In addition, you can select various options t\
o suit your requirements by using the remote control buttons.For Teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed.■
4
1
3
2
6
5
7
@
#
!
8
90
1 : (exit)
  Exit from the Teletext display.
2 8 (store)
  Used to store the Teletext pages.
3 4 (size)
  Press to display the double-size letters in the upper half of the screen\
. For lower half of the 
screen, press it again. To display normal screen, press it once again.4 Colour buttons (red/green/yellow/blue)  If the FASTEXT system is used by a broadcasting company, the different topics covered on a Teletext page are colour-coded and can be selected by pressing the coloured buttons. Press one of them corresponding to the required. The page is displayed with other coloured information that can be selected in the same way. To display the previous or next page, press the corresponding coloured button.5 / (Teletext on/mix)
  Press to activate Teletext mode after selecting the channel providing the Teletext service. 
Press it twice to overlap the Teletext with the current broadcasting screen.6 5 (reveal)
  Used to display the hidden text (answers to quiz games, for example). \
To display normal 
screen, press it again.7 1 (sub-page)
  Used to display the available sub-page.
8 2 (page up)
  Used to display the next Teletext page.
9 3 (page down)
  Used to display the previous Teletext page.
0 0 (mode)
  Press to select the Teletext mode (LIST/ FLOF). If you press it in the LIST mode, it switches 
into the List save mode. In the List save mode, you can save Teletext page into list using the 8(store) button.! 6 (index)
  Used to display the index (contents) page at any time while you are vi\
ewing Teletext.
@ 9 (hold)
  Used to hold the display on a given page if the selected page is linked \
with several 
secondary pages which follow on automatically. To resume, press it again.# 7 (cancel)
  Used to display the broadcast when searching for a page.
The Teletext pages are organized according to six categories:
PartContentsASelected page number.BBroadcasting channel identity.CCurrent page number or search indications.DDate and time.EText.FStatus information.
FASTEXT information.
Teletext information is often divided between several pages displayed in \
sequence, which can be accessed by:
Entering the page number
Selecting a title in a list
Selecting a coloured heading (FASTEXT system)Teletext level supported by the TV is version 2.5 which is capable of displaying additional graphics or text. Depending upon the transmission, blank side panels can occur when displa\
ying Teletext. In these cases, additional graphics or text is not transmitted. Older TV’s which do not support version 2.5 are not capable of displaying any add\
itional graphics or text, regardless of the Teletext transmission.
■
•
•
•■
■■■
You can change Teletext pages by pressing the numeric buttons on the remote control.
■
Press the TV button to exit from the Teletext display.■

BN68-01900M-01Eng.indb   822009-04-13   �� 10:07:48 
						

							

English
Other Information

Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1 First, click on ‘Control Panel’ on the Windows start menu.              
2 When the control panel window appears, click on ‘Appearance and Themes’ and a display 
dialog-box will appear.      
3 When the control panel window appears, click on ‘Display’ and a display dialogbox will 
appear.        
4 Navigate to the ‘Settings’ tab on the display dialog-box.The correct size setting (resolution) - Optimum: 1920 X 1080 pixels.
If a vertical-frequency option exists on your display settings dialog box, the correct value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video. For the display modes listed on the next page, the screen image has been optimized during manufacturing.
D-Sub and HDMI/DVI Input
ModeResolutionHorizontal Frequency (KHz)Vertical Frequency (Hz)Pixel Clock Frequency (MHz)Sync Polarity (H / V)
IBM 640 x 35031.469 70.086 25.175 +/- 720 x 40031.469 70.087 28.322 -/+
MAC 640 x 48035.000 66.667 30.240 -/-832 x 62449.726 74.551 57.284 -/-1152 x 87068.681 75.062 100.000 -/-
VESA CVT
720 x 57635.910 59.950 32.750 -/+1152 x 86453.783 59.959 81.750 -/+1280 x 72044.772 59.855 74.500 -/+1280 x 72056.45674.77795.750-/+1280 x 960 75.231 74.857 130.000 -/+
VESA DMT
640 x 48031.469 59.94025.175 -/-640 x 48037.861 72.80931.500 -/-640 x 48037.500 75.00031.500 -/-800 x 60037.879 60.31740.000 +/+800 x 60048.077 72.18850.000 +/+800 x 60046.875 75.00049.500 +/+1024 x 76848.363 60.00465.000 -/-1024 x 76856.476 70.06975.000 -/-1024 x 76860.023 75.029 78.750 +/+1152 x 86467.500 75.000108.000 +/+1280 x 102463.981 60.020108.000 +/+1280 x 102479.976 75.025135.000 +/+1280 x 80049.702 59.81083.500 -/+ 1280 x 80062.795 74.934106.500 -/+ 1280 x 96060.000 60.000108.000 +/+1360 x 76847.712 60.01585.500 +/+1440 x 90055.935 59.887106.500 -/+ 1440 x 90070.635 74.984136.750 -/+1680 x 105065.290 59.954146.250 -/+ 
VESA GTF1280 x 720 52.500 70.00089.040-/+ 1280 x 102474.620 70.000128.943 -/-VESA DMT / DTV CEA1920 x 1080p67.500 60.000148.500 +/+
When using an HDMI / DVI cable connection, you must use the HDMI IN 3(DVI) jack.The interlace mode is not supported.The set might operate abnormally if a non-standard video format is selec\
ted.Separate and Composite modes are supported. SOG is not supported.Too long or low quality VGA cable can cause picture noise at high resolution modes 1920x1080.
■
■
■■■■■

BN68-01900M-01Eng.indb   832009-04-13   �� 10:07:48 
						

							

English
Other Information

Troubleshooting: Before Contacting Service 
Personnel
No sound or pictureCheck that the mains lead has been connected to a wall socket.Check that you have pressed the button on your set.Check the picture contrast and brightness settings.Check the volume.
●●●●
Normal picture but no soundCheck the volume.Check whether the MUTEM button has been pressed on the remote control.Check the Speaker Select settings.
●●●
Screen is black and power indicator light blinks steadilyOn your computer check; Power, Signal Cable.The TV is using its power management system.Move the computer’s mouse or press any key on the keyboard.
●●●
No picture or black and white pictureAdjust the colour settings.Check that the broadcast system selected is correct.●●
Sound and picture interferenceTry to identify the electrical appliance that is affecting the set and move it further away.Plug your set into a different mains socket.●●
Blurred or snowy picture, distorted soundCheck the direction, location and connections of your aerial.This interference is often due to the use of an indoor aerial.●●
Remote control malfunctionsReplace the remote control batteries.Clean the upper edge of the remote control (transmission window).Check the battery terminals.
●●●
‘Check signal cable.’ message is displayedCheck that the signal cable is firmly connected to the PC or video sources.Check that the PC or video sources are turned on.●●
On PC mode, ‘Not Supported Mode.’ message is displayedCheck the maximum resolution and the frequency of the video adaptor.Compare these values with the data in the Display Modes.●●
The damaged picture appears in the corner of the screenIf Screen Fit is selected in some external devices, the damaged picture may appear in\
 the corner of the screen. This symptom is caused by external devices, not TV.●
The ‘Resets all settings to the default values.’ message appears.
This appears when you press and hold the EXIT button for a while. The product settings are reset to the factory defaults.●
You may see small particles if you look closely at the edge of the bezel surrounding the TV screen.
This is part of the product’s design and is not a defect.●
This TFT LCD panel uses a panel consisting of sub pixels (6 220 800) which req\
uire sophisticated technology to produce.  However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.■

BN68-01900M-01Eng.indb   842009-04-13   �� 10:07:48 
						

							

English
Other Information

Specifications
Model NameLE32B650, LE32B651LE32B652, LE32B653LE37B650, LE37B651LE37B652, LE37B653
Screen Size (Diagonal)32 inches37 inches
Power ConsumptionStandby
						

							
Warning! Important Safety Instructions
Please read the appropriate section that corresponds to the marking on y\
our Samsung product before attempting to install the product.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,  DO NOT REMOVE COVER (OR BACK). THERE ARE  NO USER SERVICEABLE PARTS INSIDE. REFER ALL  SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
This symbol alerts you that important literature concerning operation and maintenance has been included with this product.
The slots and openings in the cabinet and in the back or bottom are prov\
ided for necessary ventilation.  To ensure reliable operation of this apparatus, and to protect it from ov\
erheating, these slots and openings must never be blocked or covered.
- Do not cover the slots and openings with a cloth or other materials.
- Do not block the slots and openings by placing this apparatus on a bed\
, sofa, rug or other similar surface.
- Do not place this apparatus in a confined space, such as a bookcase, o\
r built-in cabinet, unless proper ventilation is provided.
Give your product 10 cm (4 inch) clearance from the wall.
Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight.
Do not place heat generating items such as candles, ashtrays, incense, f\
lammable gas or explosive materials near the product.
Do not place a water containing vessel on this apparatus, as this can re\
sult in a risk of fire or electric shock.
Do not expose this apparatus to rain or place it near water(near a bath\
tub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool etc.). If this apparatus accidentally\
 gets wet, unplug it and contact an authorized dealer immediately. Make sure to pull out the power cord from the outlet before cleaning.
This apparatus use batteries. In your community there might be regulatio\
ns that require you to dispose of these batteries properly under environmental considerations. Please contact your local authoritie\
s for disposal or recycling information.
Do not overload wall outlets, extension cords or adaptors beyond their c\
apacity, since this can result in fire or electric shock.
Power-supply cords should be routed so that they are not likely to be wa\
lked on or pinched by items placed upon or against them, paying particular attention to cords at plug end, adaptors and the point\
 where they exit from the appliance.
To protect this apparatus from a lightning storm, or when it is left unat\
tended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.  This will prevent damage to the set due to lightning and power line surg\
es.
Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local electrical supply.
Never insert anything metallic into the open parts of this apparatus. Do\
ing so many create a danger of electric shock.
To avoid electric shock, never touch the inside of this apparatus. Only a\
 qualified technician should open this apparatus.
Make sure to plug the power cord in until it is firmly inserted. When re\
moving the power cord, make sure to hold the power plug when pulling the plug from the outlet. Do not touch the power cord with \
wet hands.
If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it
unplug it immediately and contact an authorized dealer or service centre\
.
Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended \
period of time (especially when children, elderly or disabled people will be l\
eft alone in the house). 
Accumulated dust can cause an electric shock, an electric leakage or a f\
ire by causing the power cord to generate sparks and heat or the insulation to deteriorate.
Be sure to contact an authorized service centre, when installing your se\
t in a location with heavy dust, high or low temperatures,high humidity, chemical substances and where it operates for 24 hours such as the air\
port, the train station etc. Failure to do so may cause serious damage to your set.
Use only a properly grounded plug and receptacle. 
An improper ground may cause electric shock or equipment damage. (Class\
 l Equipment only.)
To disconnect the apparatus from the mains, the plug must be pulled out f\
rom the mains socket, therefore the mains plug shall be readily operable.
Do not allow children to hang onto the product.
Store the accessories (battery, etc.) in a location safely out of the reach of children.
Do not install the product in an unstable location such as a shaky self,\
 a slanted floor or a location exposed to vibration.
Do not drop or impart any shock to the product. If the product is damage\
d, disconnect the power cord and contact a service centre.
   WARNING - TO PREVENT THE SPREAD OF FIRE,  
KEEP CANDLES OR OTHER OPEN FLAMES  
AWAY FROM THIS PRODUCT AT ALL TIMES.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●

BN68-01900M-01Eng.indb   862009-04-13   �� 10:07:49 
						

							
Wiring the Mains Power Supply Plug (UK Only)
IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorpo\
rating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI13\
62 of the same rating must be used.Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug. Replacement covers are available fro\
m your dealer.If the fitted plug is not suitable for the power points in your house or\
 the cable is not long enough to reach a power point, you should obtain a suitabl y approved extension lead or consult your dealer for as\
sistance. However, if there is no alternative but to cut off the plug, remove the fuse and then safely dispose of the plug.Do NOT connect the plug to a mains socket as there is a risk of shock hazard f\
rom the bared flexible cord.
IMPORTANT The wires in the mains lead are coloured in accordance with the followin\
g code: BLUE - NEUTRAL BROWN - LIVE As these colours may not correspond to the coloured markings identifying\
 the terminals in your plug, proceed as follows : The wire coloured BLUE must be connected to the terminal marked with the\
 letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE LETTER E OR BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.
Warranty Card
UNITED KINGDOM
This Samsung product is warranted for a period of twelve (12) months f\
rom the original date of purchase, against defective materials and workmanship. In the event that warranty service is required, you sho\
uld return the product to the retailer from whom it was purchased. However, Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the country concerned. In case of d\
ifficulty, details of our Authorised Service Centres are available from:
Samsung Electronics U.K. Ltd.Customer Care CentrePO Box 17243Edinburgh, EH11 4YBUnited KingdomTel: 0845 SAMSUNG (7267864) (UK & Northern Ireland)Tel: 0818 717 100 (EIRE Only)Fax: +44 0845 650 8080Web : www.samsung.com
WARRANTY CONDITIONS
1.  The warranty is only valid if, when warranty service is required, the wa\
rranty card is fully and properly completed and is presented with the original invoice or sales slip or confirmation, and the serial \
number on the product has not been defaced.
2.  Samsung’s obligations are limited to the repair or, at its discretion, replacement of the product or the defective part.
3.  Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres. No re-imbursement will be made for repairs carried out by non Samsung Dealers and, any such repair\
 work and damage to the products caused by such repair work will not be covered by this warranty.
4.  This product is not considered to be defective in materials nor workmans\
hip by reason that it requires adaptation in order to conform to national or local technical or safety standards in force in a\
ny Country other than the one for which the product was originally designed and manufactured.

BN68-01900M-01Eng.indb   872009-04-13   �� 10:07:49 
						

							
This product uses parts of the software from the Independent JPEG Group.\
This product uses parts of the software owned by the Freetype Project (\
www.freetype.org).This product uses some software programs which are distributed under the\
 GPL/LGPL license. Accordingly, the following GPL and LGPL software source codes that have been used in this product can be provided after asking to [email protected].
GPL software: Linux Kernel, Busybox, Binutils
LGPL software: Glibc, ffmpeg, smpeg, libgphoto, libusb, SDL
GNU GENERAL PUBLIC LICENSE
Version 3, 29 June 2007
 Copyright (C) 2007 Free Software Foundation, Inc. 
 Everyone is permitted to copy and distribute verbatim copies of this li\
cense document, but changing it is not allowed.
Preamble
The GNU General Public License is a free, copyleft license for software \
and other kinds of works.
The licenses for most software and other practical works are designed to\
 take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your f\
reedom to share and change all versions of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General Public License for \
most of our software; it applies also to any other work released this way by its\
 authors. You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. \
Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge \
for them if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in \
new free programs, and that you know you can do these things.
To protect your rights, we need to prevent others from denying you these \
rights or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, \
or if you modify it: responsibilities to respect the freedom of others.
For example, if you distribute copies of such a program, whether gratis \
or for a fee, you must pass on to the recipients the same
freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.
Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the softw\
are, and (2) offer you this License giving you legal permission to copy, distribute and/or modify it.
For the developers’ and authors’ protection, the GPL clearly explains that there is no warranty for this free software. For both users’ and authors’ sake, the GPL requires that modified versions be marked as changed, so that their problems will not be attributed erroneously to authors of previous versions.
Some devices are designed to deny users access to install or run modifie\
d versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users’ freedom to change the software. The systematic pattern of such abuse occurs in the area of products for indi\
viduals to use, which is precisely where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems arise sub\
stantially in other domains, we stand ready to extend this provision to those domai\
ns in future versions of the GPL, as needed to protect the freedom of users.
Finally, every program is threatened constantly by software patents. States sho\
uld not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish \
to avoid the special danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program non-free.
The precise terms and conditions for copying, distribution and modificat\
ion follow.
TERMS AND CONDITIONS
0.  Definitions.“This License” refers to version 3 of the GNU General Public Licen\
se.
“Copyright” also means copyright-like laws that apply to other kin\
ds of works, such as semiconductor masks.
“The Program” refers to any copyrightable work licensed under this\
 License. Each licensee is addressed as “you”. “Licensees” and “recipients” may be individuals or organizations.
To “modify” a work means to copy from or adapt all or part of the w\
ork in a fashion requiring copyright permission, other than the making of an exact copy. The resulting work is called a “modified version” of the earlier work or a work “based on” the earlier work.
●●●

BN68-01900M-01Eng.indb   882009-04-13   �� 10:07:49 
						

							
A “covered work” means either the unmodified Program or a work base\
d on the Program.
To “propagate” a work means to do anything with it that, without pe\
rmission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modification), making \
available to the public, and in some countries other activities as well.
To “convey” a work means any kind of propagation that enables other\
 parties to make or receive copies. Mere interaction with a user through a computer network, with no transfer of a copy, is not conveying.
An interactive user interface displays “Appropriate Legal Notices”\
 to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and\
 (2) tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees ma\
y convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands \
or options, such as a menu, a prominent item in the list meets this criterion.
1.  Source Code.The “source code” for a work means the preferred form of the work \
for making modifications to it. “Object code” means any non-source
form of a work.
A “Standard Interface” means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one \
that is widely used among developers working in that language.
The “System Libraries” of an executable work include anything, oth\
er than the work as a whole, that (a) is included in the normal form of packaging a Major Component, but which is not part of tha\
t Major Component, and (b) serves only to enable use of the work with that Major Component, or to implement a Standard In\
terface for which an implementation is available to the public in source code form. A “Major Component”, in this context, means a major essential component (kernel, window system, and so on) of the specific operating system (if any) on which\
 the executable work runs, or a compiler used to produce the work, or an object code interpreter used to run it.
The “Corresponding Source” for a work in object code form means al\
l the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including \
scripts to control those activities. However, it does not include the work’s System Libraries, or general-purpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work. For e\
xample, Corresponding Source includes interface definition files associated with source files for the work, and the sour\
ce code for shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as b\
y intimate data communication or control flow between those subprograms and other parts of the work.
The Corresponding Source need not include anything that users can regene\
rate automatically from other parts of the Corresponding Source.
The Corresponding Source for a work in source code form is that same wor\
k.
2.  Basic Permissions.All rights granted under this License are granted for the term of copyri\
ght on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the outpu\
t, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, a\
s provided by copyright law. You may make, run and propagate covered works that you do not convey, without conditions so long as your license otherwise remains in force. You may convey covered works to others for the sole purpose of having them m\
ake modifications exclusively for you, or provide you with facilities for running those works, provided that you comply wi\
th the terms of this License in conveying all material for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit th\
em from making any copies of your copyrighted material outside their relationship with you.
Conveying under any other circumstances is permitted solely under the co\
nditions stated below. Sublicensing is not allowed; section 10 makes it unnecessary.
3.  Protecting Users’ Legal Rights From Anti-Circumvention Law.No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures.
When you convey a covered work, you waive any legal power to forbid circ\
umvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modification of the work as a means of e\
nforcing, against the work’s users, your or third parties’ legal rights to forbid circumvention of technological measures.
4.  Conveying Verbatim Copies.You may convey verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copy\
right notice; keep intact all notices stating that this License and any non-permissive terms added in accord with section 7 appl\
y to the code; keep intact all notices of the absence of any warranty; and give all recipients a copy of this License along wi\
th the Program.
You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee.
5.  Conveying Modified Source Versions.You may convey a work based on the Program, or the modifications to produ\
ce it from the Program, in the form of source code under the terms of section 4, provided that you also meet all of these c\
onditions:

BN68-01900M-01Eng.indb   892009-04-13   �� 10:07:49 
						

							
a) The work must carry prominent notices stating that you modified it, and \
giving a relevant date.
b) The work must carry prominent notices stating that it is released under \
this License and any conditions added under section 7. This requirement modifies the requirement in section 4 to “keep intac\
t all notices”.
c) You must license the entire work, as a whole, under this License to anyon\
e who comes into possession of a copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it does not invalidate such permission if you have separately received it.
d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so.
A compilation of a covered work with other separate and independent works\
, which are not by their nature extensions of the covered work, and which are not combined with it such as to form a l\
arger program, in or on a volume of a storage or distribution medium, is called an “aggregate” if the compilation a\
nd its resulting copyright are not used to limit the access or legal rights of the compilation’s users beyond what the individual works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate\
.
6.  Conveying Non-Source Forms.You may convey a covered work in object code form under the terms of sect\
ions 4 and 5, provided that you also convey the machine-readable Corresponding Source under the terms of this License, i\
n one of these ways:
a) Convey the object code in, or embodied in, a physical product (incl\
uding a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customari\
ly used for software interchange.
b) Convey the object code in, or embodied in, a physical product (incl\
uding a physical distribution medium), accompanied by a written offer, valid for at least three years and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1)\
 a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable ph\
ysical medium customarily used for software interchange, for a price no more than your reasonable cost of physically\
 performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no char\
ge.
c) Convey individual copies of the object code with a copy of the writt\
en offer to provide the Corresponding Source. This alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an offer, in accord with subsection 6b.
d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent access to the Corresponding Source in the same way through the same plac\
e at no further charge. You need not require recipients to copy the Corresponding Source along with the object code. \
If the place to copy the object code is a network server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the o\
bject code saying where to find the Corresponding Source. Regardless of what server hosts the Corresponding Source, you re\
main obligated to ensure that it is available for as long as needed to satisfy these requirements.
e) Convey the object code using peer-to-peer transmission, provided you\
 inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. A separable portion of the object code, whose source code is excluded from the Corre\
sponding Source as a System Library, need not be included in conveying the object code work.
A “User Product” is either (1) a “consumer product”, which \
means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, doubtful cases shall be resolve\
d in favor of coverage. For a particular product received by a particular user, “normally used” refers to a typical or common use of that class of product, regardless of the status of the particular user or of the way in which the particular user\
 actually uses, or expects or is expected to use, the product. A product is a consumer product regardless of whether the product has substantial commercial, industrial or non-consumer uses, unless such uses represent the only significant mode of u\
se of the product.
“Installation Information” for a User Product means any methods, p\
rocedures, authorization keys, or other information required to install and execute modified versions of a covered work in that User \
Product from a modified version of its Corresponding Source. The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made.
If you convey an object code work under this section in, or with, or spe\
cifically for use in, a User Product, and the conveying occurs as part of a transaction in which the right of possession and use\
 of the User Product is transferred to the recipient in perpetuity or for a fixed term (regardless of how the transaction is ch\
aracterized), the Corresponding Source conveyed under this section must be accompanied by the Installation Information. But th\
is requirement does not apply if neither you nor any third party retains the ability to install modified object code on the U\
ser Product (for example, the work has been installed in ROM).
•
•
•
•
•
•
•
•
•

BN68-01900M-01Eng.indb   902009-04-13   �� 10:07:49