Samsung LE 32B653 User Manual

							
1
English
Using the Menus

Setup
OptionDescription
Game ModeWhen connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting game menu.If Game Mode is On:
Picture mode is automatically changed to Standard and cannot be changed.
Sound mode is automatically changed to Custom and cannot be changed. Adjust the sound using the equalizer.
The Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer settings to the factory defaults.
■
•
•
•
BD WiseProvides the optimal picture quality for SAMSUNG DVD, Blu-ray and Home Theatre products which support BD Wise. You can enjoy a richer picture when using them connected to this Samsung TV.Connect SAMSUNG products that have BD Wise using an HDMI cable.When the BD Wise set to On, the picture mode is automatically changed to the optimal resolution.BD Wise is available in HDMI mode.
■
■
■
Network Type /  Network Setup
For detailed procedures on setting up options, refer to pages 36~38.
Child LockThis feature allows you to prevent unauthorized users, such as children, from watching unsuitable programme by muting out video and audio.Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number.The default PIN number of a new TV set is 0-0-0-0. You can change the PIN by selecting Change PIN from the menu.You can lock some channels in Channel List.
■
■■
■
Change PINYou can change your personal ID number that is required to set up the TV.Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number.The default PIN number of a new TV set is 0-0-0-0.
■
■
Parental Lock >  Parental Rating
This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programme by a 4-digit PIN (Personal Identification Number) code that is defined by the user.The Parental Rating item differs depending on the country.Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number.The default PIN number of a new TV set is “0-0-0-0”. You can change the PIN by selecting Change PIN from the menu.When the parental ratings are set, the “\” symbol is displayed.Allow All: Press to unlock all TV ratings.Block All: Press to lock all TV ratings.
■
■
■■
■
■■
Child Lock is available only in TV mode.■
If you forget the PIN code, press the remote control buttons in the following sequence, which resets the PIN to 0-0-0-0: POWER (Off) → MUTE → 8 → 2 → 4 → POWER (On).
■
Restrictions on game mode (Caution)
To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu.
Game Mode is not available in regular TV, PC and Ext mode.
While PIP is in operation, the Game Mode function cannot be used.If the picture is poor when external device is connected to TV, check if Game Mode is On. Set Game Mode to Off and connect external devices.
■
•
•
•
■

BN68-01900M-01Eng.indb   312009-04-13   �� 10:07:21 
						

							

English
Using the Menus

Setup
OptionDescription
SubtitleYou can activate and deactivate the subtitles. Use this menu to set the Subtitle Mode. Normal under the menu is the basic subtitle and Hard of hearing is the subtitle for a hearing-impaired person.Subtitle
Switches subtitles on or off.Mode 
Sets the subtitle mode.Subtitle Language
Set the subtitle language.
If the programme you are watching does not support the Hard of hearing function, Normal automatically activates even though Hard of hearing mode is selected.
English is the default in cases where the selected language is unavailable in the broadcast.
■
■
■
•
•
Teletext LanguageYou can set the Teletext language by selecting the language type.English is the default in cases where the selected language is unavailable in the broadcast.■
PreferencePrimary Audio Language / Secondary Audio Language / Primary Subtitle Language / Secondary Subtitle Language / Primary Teletext Language / Secondary Teletext Language Using this feature, users can select one of the languages. The language selected here is the default when the user selects a channel If you change the language setting, the Subtitle Language, Audio Language, and the Teletext Language of the Language menu are automatically changed to the selected language. The Subtitle Language, Audio Language, and the Teletext Language of the Language menu show a list of languages supported by the current channel and the selection is highlighted. If you change this language setting, the new selection is only valid for the current channel. The changed setting does not change the setting of the Primary Subtitle Language, Primary Audio Language, or the Primary Teletext Language of the Preference menu.
■
Digital Text If the programme is broadcast with digital text, this feature is enabled.MHEG (Multimedia and Hypermedia Information Coding Experts Group)  An International standard for data encoding systems used in multimedia and hypermedia. This is at a higher level than the MPEG system which includes data-linking hypermedia such as still images, character service, animation, graphic and video files as well as multimedia data. MHEG is user runtime interaction technology and is being applied to various fields including VOD (Video-On-Demand), ITV (Interactive TV), EC (Electronic Commerce), tele-education, tele-conferencing, digital libraries and network games.
■
MelodyA melody sound can be set to come on when the TV is powered On or Off.The Melody does not playWhen no sound is output from the TV because the MUTE button has been pressed.When no sound is output from the TV because the volume has been reduced to minimum with the volume (-) button.When the TV is turned off by Sleep Timer function.
■•
•
•
Energy Saving This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the Energy Saving mode option to High to reduce eye fatigue as well as power consumption.
Press the TOOLS button to display the Tools menu. You can also set the Energy Saving option by selecting Tools → Energy Saving.
■
You can select these options simply by pressing the SUBT. button on the remote control.
■

BN68-01900M-01Eng.indb   322009-04-13   �� 10:07:21 
						

							

English
Using the Menus

Setup
OptionDescription
PIPYou can use the PIP feature to simultaneously watch the TV tuner and one external video source. This product has one built-in tuner, which does not allow PIP to function in the same mode. Please see ‘PIP Settings’ below for details.If you select the PIP picture sound, refer to the ‘Sound Menu’ instructions.
PIP
You can activate or deactivate the PIP function. 
Size → Õ / à / À / Œ
You can select a size of the sub-picture.
Position → à / – / — / œ
You can select a position of the sub-picture.In Double (Œ, À) mode, Position cannot be selected.
Channel
You can select the channel for the sub-screen.
■
❑
❑
❑
■
❑
Common InterfaceCI Menu
This enables the user to select from the CAM-provided menu.
Select the CI Menu based on the menu PC Card.Application Info.
This contains information on CAM inserted in the CI slot and displays it. The Application Info inserting is about the CI CARD. You can install the CAM anytime whether the TV is ON or OFF.
1. Purchase the CI CAM module by visiting your nearest dealer or by phone.
2.  Insert the CI CARD into the CAM in the direction of the arrow until it fits.
3.  Insert the CAM with the CI CARD installed into the common interface slot.  (Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot.)
4.  Check if you can see a picture on a scrambled signal channel.
■
■
PIP Settings
Main pictureSub picture
Component
HDMI1, HDMI2, HDMI3/DVI, HDMI4
PC
TV
If you turn the TV off while watching in PIP mode and turn it on again, the PIP window will disappear.You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.While Internet@TV is in operation, the PIP function cannot be used.
■
■
■
PIP  : On   ▶
Size  : ÕPosition : ÃChannel : ATV 4
U Move     E Enter     R Return
PIP
Press the TOOLS button to display the Tools menu. You can also configure PIP related settings by selecting Tools → PIP.
■

BN68-01900M-01Eng.indb   332009-04-13   �� 10:07:21 
						

							

English
Using the Menus

Network Connection
You can set up the Internet Protocol so that you can communicate with var\
ious connected networks.
Network Connection - Cable
LAN Connection for a DHCP EnvironmentThe procedures to set up the network using Dynamic Host Configuration Pr\
otocol (DHCP) are described below. Since an IP address, subnet mask, gateway, and DNS are automatically allocated when DHCP is selected, you do not have to enter them manually.
1 Connect the LAN port on the rear panel of the TV and the external modem with a LAN Cable.     
2 Connect the Modem port on the wall and the external modem with a Modem C\
able.
You can connect the LAN via a Sharer (Router).
You can connect the LAN port and the TV directly depending on your network status.
The terminals (the position of the port and the type) of the external \
device may differ depending on the manufacturer.If the IP address allocation by the DHCP server has failed, turn the external modem off, turn it on again after at least 10 seconds and then try again.For the connections between the external modem and the Sharer (Router)\
, refer to the owner’s manual of the corresponding product.You can connect the TV to the LAN directly without connecting it through a Sharer (Router)You cannot use a manual-connection-type ADSL modem because it does not support DHCP. You have to use an automaticconnection-type ADSL modem.
❑
■
■■
■
■■
TV Rear PanelThe Modem Port on the WallExternal Modem (ADSL / VDSL / Cable TV)
1 LAN Cable2  Modem Cable
TV Rear PanelThe Modem Port on the WallExternal Modem (ADSL / VDSL / Cable TV)
LAN CableModem CableLAN Cable
IP Sharer
TV Rear PanelThe LAN Port on the Wall
LAN Cable

BN68-01900M-01Eng.indb   342009-04-13   �� 10:07:22 
						

							

English
Using the Menus

LAN Connection for Static IP EnvironmentThe procedures to set up the network using a static IP address are described below. You have to manually enter the IP address, subnet mask, gateway, and DNS that are provided by your Internet Service Provider (ISP). 
Connect the LAN port on the rear panel of the TV and the LAN port on the wall using the LAN cable.
You can connect the LAN via a Sharer (Router).
The terminals (the position of the port and the type) of the external \
device may differ depending on the manufacturer.If you are using a static IP address, your ISP will inform you of the IP address, subnet mask, gateway, and DNS. You must enter these values to complete the network settings. If you do not know the va\
lues, ask your network administrator.For the information on how to configure and connect a Sharer (Router),\
 refer to the owner’s manual for the corresponding product.You can connect the TV to the LAN directly without connecting it through a Sharer (Router).If you use an IP Sharer (IP Router) that supports DHCP, you can set up the device as either DHCP or static IP.For the procedures to use a static IP address, ask your Internet Service Provider.
Network Connection - Wireless
You can connect to the network wirelessly through a wireless IP sharer.
Connect the ‘Samsung Wireless LAN Adapter’ into the USB1(HDD) or USB2 terminal of the TV.
You must use the ‘Samsung Wireless LAN Adapter’(WIS09ABGN) to use a wireless network.Samsung’s Wireless LAN adapter is sold separately. The WIS09ABGN Wireless LAN adapter is offered by select retailers, Ecommerce sites and Samsungparts.com.To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network.Samsung’s Wireless LAN adapter supports IEEE 802.11A, IEEE 802.11B, IEEE 802.11G, IEEE 802.11N. When you play DLNA video over IEEE 802.11B/G connection, the video may not be played smoothly.If the wireless IP sharer allows you to turn the Ping connection function on/off, turn it on.Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wir\
eless IP sharer is currently being used by another device nearby, this will result in interference and communications may fail.If you apply a security system other than the systems listed blow, it will not work with the TV.
When applying the security key for the AP (wireless IP sharer), only the following is supported.1) Authentication Mode : OPEN, SHARED, WPAPSK, WPA2PSK2) Encryption Type : WEP, TKIP, AES
When applying the security key for the Ad-hoc mode, only the following is supported.1) Authentication Mode : SHARED, WPANONE2) Encryption Type : WEP, TKIP, AESIf your AP supports WPS(Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or PIN (Personal Identification Number). WPS will automatically configure the\
 SSID and WPA key in either mode.If the device isn’t certified, it may not connect to the TV via the ‘Samsung Wireless LAN Adapter’.
■
■■
■■■■
❑
■■
■
■
■■
■
•
•
■
■
TV Rear PanelThe LAN Port on the Wall
1 LAN Cable
TV Rear PanelThe LAN Port on the WallIP Sharer
LAN CableLAN Cable
TV Side Panel
The LAN Port onthe WallWireless IP sharer
Samsung WirelessLAN Adapter
LAN Cable
or

BN68-01900M-01Eng.indb   352009-04-13   �� 10:07:23 
						

							

English
Using the Menus

Game Mode : Off
BD Wise  : On
Network Type : Cable ▶
Network Setup
Child Lock  : On
Change PINParental LockSubtitle
Teletext Language : - - -
Preference
Setup
The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is connected. 
■
Setting the Network
Setup
OptionDescription
Network TypeSelect Cable or Wireless as the method to connect to the network.Cable
Connect to the network using a cable.Wireless
Connect to the network wirelessly.
■
■
Network Setup Cable Network Setup 
(when Network Type is set to Cable)Please check if the LAN cable is connected.
Internet Protocol Setup → Auto / Manual
Network Test: You can test or confirm the network connection status after setting up the network.
Cable Network Setup-Auto
If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically configured. 
1. Set Network Type to Cable.
2.  Select Cable Network Setup.  The Internet Protocol is set automatically.
3.  Set Internet Protocol Setup to Auto.
4.  Select Network Test to check the network connectivity.
❑
■
•
•
When unable to connect to a wired network
If your Internet service provider has registered the MAC address of the \
device used to connect to the Internet for the first time and authenticates the MAC add\
ress each time you connect to the Internet, your TV may not be able to connect to the Internet as the MAC address differs from that of the device (PC).
In this case, ask your Internet service provider about the procedures to\
 connect devices other than your PC (such as your TV) to the Internet. If your Internet service provider requires an ID or password to connect to the Internet (network), your \
TV may not be able to connect to the Internet. In this case, you have to enter your ID\
 or password when connecting to the Internet using an Internet Sharer (Router).
The internet connection may fail due to a firewall problem. In this case\
, contact your Internet service provider. If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider, please contact Samsung Electronics.
Internet Protocol Setup  : Auto   ▶Network Test
U Move     E Enter   R Return
Cable Network Setup
IP Address  :          Subnet Mask :          Gateway :           
DNS Server  :          

BN68-01900M-01Eng.indb   362009-04-13   �� 10:07:23 
						

							

English
Using the Menus

Setup
OptionDescription
Network Setup Cable Network Setup-Manual
To connect the TV to the LAN using a static IP address, you must set up the Internet Protocol (IP). 
1. Set Network Type to Cable.
2. 
Select Cable Network Setup.
3.  Set Internet Protocol Setup to Manual.
4.  Set up IP Address, Subnet Mask, Gateway and DNS Server.Press the number buttons on the remote control when you set the Network manually.
5.  Select Network Test to check the network connectivity.
Wireless Network Setup
Internet Protocol Setup → Auto / Manual
Network Test: You can test or confirm the network connection status after setting up the network.
Select a network: Access Point: You can select the IP sharer to use when using a wireless network.If a wireless Access Point is not in the Access Point list, press the Red button.When the connection is made, you will be returned to the screen automatically.If you have selected an Access Point with a security authentication: The Security Key input screen appears. Enter the security key and press the Blue button on the remote control.
If security encryption type is WEP, 0~9, A~F will be available when you input security key.
Connecting WPS (Wi-Fi Protected Setup)
If Security Key is already set: In access point list, select WPS.You can select PBC, PIN, Security Key.
Connecting by using PBC: Select a PBC (Push Button Configuration). Press the PBC button on the AP (access point) within 2minutes, and wait for connection.
Connecting by using PIN: Select a PIN (Personal Identification Number).The message showing the PIN Code is displayed. Input the PIN Code at AP device within 2minutes. Select OK and wait for connection.Try again if connecting operation doesn’t work.When the connection is not established although tried again, reset the access point. Please refer to a manual of each access point.
Connecting by using Security Key: When selecting Security Key, the input window is displayed. Input the security key and press ENTERE button.Try again if connecting operation doesn’t work.
If Security Key is not set: When security setting of AP that supports WPS is NONE, you can select PBC, PIN, None Security. None Security is capable of connecting to AP directly without using WPC function.Process of PBC, PIN is same as above.  Refer to if Security Key is already set.Try again if connecting operation doesn’t work.
■
■
•
•
•
●
●
●
●
■
•
•
●
●●
•
●
•
●
●
The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is connected. 
■
Wireless Network Setup
 U Move     E Enter     R Return
Select a network3/9
 Search Ad-hoc
ssonjeeAP_1Ap_2
PBCPINSecurity Key
Cancel
Press the PBC button on the access point.Access Point Name : AP_1
Press OK After input TV’s Pin code in the access point’s setup.Access Point Name : AP_1PIN Code : 12345678
CancelOK
Wireless Network Setup
 n Move      `~9 Number     E Enter     R Return
Security Key Number  Lowercase  Delete  Done
AHOV
BIPW
CJQX
DKRY
ELSZ
FMT
GNU
Wireless Network Setup
 U Move     E Enter     R Return
Select a network3/9
 Search Ad-hoc
ssonjeeAP_1Ap_2
PBCPINNone Security
Wireless Network Setup
 n Move      `~9 Number     E Enter     R Return
Security Key Number  Delete  DoneABCDEF

BN68-01900M-01Eng.indb   372009-04-13   �� 10:07:24 
						

							

English
Using the Menus

Setup
OptionDescription
Network Setup Ad-hoc: You can connect to a mobile device without an access point through the ‘Samsung Wireless LAN Adapter’ by using a peer to peer network.
How to connect to new Ad-hoc1. Choose Select a network, then a device list is displayed.2. While in the device list, press the Blue button on the remote or select Ad-hoc. The message that means the existing network is disconnected is displayed.
3. Input the generated Network Name(SSID) and Security Key into the device you want to connect.
How to connect an existing Ad-hoc device1. Choose Select a network, the device list is displayed.2. Select the device you want in the Device list.3. If security key was applied, input the security key again.If network doesn’t operate normally, please check the Network Name(SSID) and Security Key again. If the Security Key is incorrect, it may be the reason for the malfunction.
Wireless Network Setup-Auto
If you want to connect AP, AP should support DHCP.  Only devices which support Ad-hoc mode can be connected without DHCP.
1. Set Network Type to Wireless.
2.  Select Wireless Network Setup.
3.  Set Internet Protocol Setup to Auto.The Internet Protocol is set automatically.
4.  Select a network through 
Select a network.
5.  Select Network Test to check the network connectivity.
Wireless Network Setup-Manual
1.  Set Network Type to Wireless.
2.  Select Wireless Network Setup.
3.  Set Internet Protocol Setup to Manual.
4.  Set up IP Address, Subnet Mask, Gateway and DNS Server.Press the number buttons on the remote control when you set the Network manually.
5.  Select 
Network Test to check the network connectivity.
•
■
■
■
■
Internet Protocol Setup  : Auto   ▶Network Test
Select a network   : AP1
U Move     E Enter     R Return
Wireless Network Setup
IP Address :          Subnet Mask :          Gateway :           
DNS Server  :          
Internet Protocol Setup : Manual   ▶Network Test
Select a network   : AP1
U Move     E Enter     R Return
Wireless Network Setup
IP Address : 0   0   0   0Subnet Mask : 0   0   0   0Gateway : 0   0   0   0 
DNS Server  : 0   0   0   0
The existing network system may have limited functionality. Do you want to change the network connection?
Yes No 
When unable to connect to an AP(Access Point)Your TV may fail to locate an AP(Access Point) that is configured as a private SSID type. In this case, please change the AP settings and try again. If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the first time and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to the Internet as the MAC address differs from that of the device (PC).In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV) to the Internet. If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider, please contact a Samsung Electronics.

BN68-01900M-01Eng.indb   382009-04-13   �� 10:07:24 
						

							

English
Using the Menus

Input Menu
Input
OptionDescription
Source ListUse to select TV or other external input sources such as DVD / Blu-ray players / Cable Box / Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice.TV / Ext.1 / Ext.2 / AV / Component / PC / HDMI1 / HDMI2 / HDMI3/DVI / HDMI4 / USB / DLNA.
You can choose only those external devices that are connected to the TV. In the Source List, connected inputs will be highlighted and sorted to the top. Inputs that are not connected will be sorted to the bottom.
If USB devices are connected to the USB1(HDD) and USB2 jacks, they are displayed as USB1 and USB2 in order.
Using the Colour buttons on the remote with the Source list.Red (Refresh): Refreshes the connected external devices. Press this if your Source is on and connected, but does not appear in the list.TOOLS (Tools): Displays the Edit Name and Information menus.
■
•
•
•
●
●
Edit NameName the device connected to the input jacks to make your input source selection easier.VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / game / Camcorder / PC / DVI / DVI PC / TV / IPTV / Blu-ray / HD DVD / DMA
When a PC with a resolution of 1920 x 1080@60Hz is connected to the HDMI IN 3(DVI) port, you should set the HDMI3/DVI mode to DVI PC in the  Edit Name of the Input mode.
When connecting an HDMI/DVI cable to the  HDMI IN 3(DVI) port, you should set the  HDMI3/DVI mode to DVI or DVI PC in the  Edit Name of the Input mode. In this case, a separate sound connection is required.
■
•
•
Press the SOURCE button on the remote control to view an external signal source. TV mode can be selected by pressing the TV button.
■
   Refresh     T Tools
Source List
TV
Ext. 1 : - - - -
Ext. 2  : - - - -
PC  : - - - -
AV  : - - - -
Component  : - - - -
Source List   
Edit Name
Input
PC always stays activated.■

BN68-01900M-01Eng.indb   392009-04-13   �� 10:07:24 
						

							
0
English
Using the Menus

Support menu
Support
OptionDescription
Legal NoticeView the Legal Notice and General Disclaimer regarding Third Party Contents and Service.The General Disclaimer may differ depending on the country.■
Product GuideThe Product Guide gives you information on the most important features of this TV.
The descriptions provided by this function are in English only.
Picture QualityFull HD 1080p
100Hz Motion Plus
Picture Mode
[email protected]@TV
Content Library Flash
USB2.0 Movie
DLNA Wireless
Eco-FriendlyEnergy Saving Mode
Eco Material
Using the Remote Control Buttons in the Product Guide Menu
ButtonOperations
Yellow ButtonShows the contents of the Product Guide sequentially. 
(Auto Play)
◄/►Move the cursor and select an item.
ENTERESelect the currently selected item.
RETURNReturn to the previous menu.
EXITStop the current function and return to the Product Guide main menu.
Support
OptionDescription
Self DiagnosisPicture TestIf you think you have a picture problem, perform the picture test. Check the colour pattern on the screen to see if the problem still exists.Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes. Therefore, contact Samsung’s call centre for assistance.No: If the test pattern is properly displayed, select No. There may be a problem with your external equipment. Please check your connections. If the problem still persists, refer to the external device’s user manual.Sound TestIf you think you have a sound problem, please perform the sound test. You can check the sound by playing a built-in melody sound through the TV.‘Does the problem still exist with this sound test?’ appears on the screen.Yes: If during the sound test you can hear sound only from one speaker or not at all, select Yes. Therefore, contact Samsung’s call centre for assistance.No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check your connections. If the problem still persists, refer to the external device’s user manual.
■
•
•
■
•
•
If you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV speaker in the Sound menu.
■
The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button.
■
Legal Notice   ▶
Product GuideSelf DiagnosisSoftware UpgradeHD Connection GuideContact Samsung
Support

BN68-01900M-01Eng.indb   402009-04-13   �� 10:07:24