Home > Samsung > Television > Samsung Le 27t51b Service Manual

Samsung Le 27t51b Service Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Samsung Le 27t51b Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							4 Troubleshooting
    4-6
    4-4 No Picture (Tuner_CVBS)
    Does the signal appear at
    C268?Check a IC210.
    Change a main PCB assy.
    Yes
    Does the digital data appear 
    at output of R422~R425,
    R430~R433?Check a IC310.
    Change a main PCB assy.
    Yes Power Indicator is off. 
    Lamp on, no picure.
    Connect the RF cable and 
    check RF signal.No
    No
    No
    Yes
    Check a LVDS cable?
    Replacea lcd panel?Please, Call to Samsung Co. LTD.No
    5
    3
     
    						
    							4 Troubleshooting
    4-7
    WAVEFORMS
    3Digital Output Data of IC3105Tuner_CVBS Output Signal
     
    						
    							4 Troubleshooting
    4-8
    4-5 No Picture (Video_CVBS)
    Dose the signal 
    appear at R7003?Check a connection harness.
    Yes
    Does the digital data appear 
    at output of R422~R425,
    R430~R433?Check a IC310.
    Change a main PCB assy.
    Yes Power Indicator is off. 
    Lamp on, no picure.
    NoCheck a A/V cable and video signal.
    No
    No
    Yes
    Check a LVDS cable?
    Replacea lcd panel?Please, Call to Samsung Co. LTD.No
    5
    3
     
    						
    							4 Troubleshooting
    4-9
    WAVEFORMS
    3Digital Output Data of IC3105Tuner_CVBS Output Signal
     
    						
    							4 Troubleshooting
    4-10
    4-6 No Picture (S-VIDEO_Y,C)
    Dose the signal appear at
    R7001, R7002?Check a connection harness.
    Yes
    Yes Power Indicator is off. 
    Lamp on, no picure.
    NoConnect the s-video cable.
    Operating a video player.
    No
    Does the digital data appear 
    at Output of R422~R425,
    R430~R433?Check a IC310.
    Change a main PCB assy.No
    Yes
    Check a LVDS cable?
    Replacea lcd panel?Please, Call to Samsung Co. LTD.No
    6
    3
     
    						
    							4 Troubleshooting
    4-11
    3Digital Output Data of IC3106Analog Signal(Y,C)
    WAVEFORMS
     
    						
    							4 Troubleshooting
    4-12
    Does the signal appear at
    Pin 12, 1(CH1_L, R Sound) 
    and Pin 15, 2
    (CH2_L, R Sound)
    of IC613?Check a connection harness and
    headphone jack.
    Yes
    Yes
    No
    Check the DC 8V
    appear at C653?Check a IC813. 
    Change a main PCB assy.
    YesNo
    Does the signal appear at
    L624_OP, L625_OP?Check a IC611.
    Change a main PCB assy.
    Yes
    Replace the speaker assy?No
    4-7 No Sound
    7
    8
    9
    Connect a sound cable.  
    control a volume.Picture is display, no sound.No
     
    						
    							4 Troubleshooting
    4-13
    WAVEFORMS
    7The Signal are Inputed to IC6108DC +8V
    9Output WaveForm
     
    						
    							3 Alignments and Adjustments
    3-1
    3 Alignments and Adjustments
    3-1 General Alignment Instuction
    1. Usually, a color LCD-TV needs only slight touch-up adjustment upon installation.
    Check the basic characteristics such as height, horizontal and vertical sync.
    2. Use the specified test equipment or its equivalent.
    3. Correct impedance matching is essential.
    4. Avoid overload. Excessive signal from a sweep generator might  overload the front-end 
    of the TV. When inserting signal markers, do not allow the marker generator to distort test result.
    5. Connect the TV only to an AC power source with voltage and frequency as specified on 
    the backcover nameplate.
    6. Do not attempt to connect or disconnect any wire while the TV is turned on. Make sure
    that the power cord is disconnected before replacing any parts.
    7. To protect aganist shock hazard, use an isolation transform.
     
    						
    							3 Alignments and Adjustments
    3-2
    3-2 Factor y Mode Adjustments
    3-2-1 Entering Factor y Mode
    To enter Service Mode Press the remote -control keys in this sequence :
    - If you do not have Factory remote - control
    3-2-2 Factor y Mode Tree
    - If you have Factory remote - control
    [INFO] -> [FACTORY] 
    Power OFFMENUMUTEPower OnINFO
    1. Calibration
    2. Option Byte
    3. W/B
    4. VCTi
    5. YC Delay
    6. FLI5961
    7. Adjust
    8. Test Pattern
    9. Password
    10. Check Sum
    11. Spread Spectrum
    12. HDCP
    13. Reset
    T-TRNPEU-0000 month day year time 
    P-TRNPEU-0000
    Panel On Time(Hour) 00001. Calibration : W/B Calibration
    AV Calibration
    DTV Calibration
    PC Calibration
    2. Option byte : Setting option
    Panel option  : 32/40/23/26/27
    Gamma 
    : off/on
    Analog Dimming  : AUO/CMO/AMLCD/Panal2
    Auto Power  : on/off
    Video Mute  : 5
    Language : English
    Hotel Mode  : off/on
    LNA Plus  : off/on
    V-chip : off
    Auto FM  : off/on
    High Deviation  : off/on
    TTX List  : Flop/List
    TTX Top : off/on
    TTX Group : 
    Auto/West Europe/East Europe/
    Russian/Greek
    Turkey/Arabic/
    Farsian/Arab.Habrew
    DVI : on/off
    HDCP Key : ok
    3. W/B : Adjustment White Balance
    Sub Bright  : 128
    R  off set : 128
    G  off set  : 128
    B  off set : 128
    Sub contrast : 128
    R  gain : 128
    G  gain : 128
    B gain : 128
    4. VCTi: VCTi IC Correct register
    VCTi Page 1
    VCTi Page 2
     
    						
    All Samsung manuals Comments (0)

    Related Manuals for Samsung Le 27t51b Service Manual