Samsung LE 19C450 User Manual

							31English
05
Other Information
Listening through a Receiver  ¦
You can listen to sound through a receiver (i.e Home Theatre) instead of the TV speaker.
1. Select Receiver and set to On.
2. Press the EXIT button to exit.
If your receiver supports audio only, it may not appear in the device list. ✎
The receiver will work when you have properly connected the optical in jack of the receiver to the  ✎DIGITAL AUDIO OUT (OPTICAL) jack of the T V.
When the receiver (i.e Home Theatre) is set to On, you can hear sound output from the T V’s Optical jack. When the  ✎T V is displaying a DT V (aerial) signal, the T V will send out 5.1 channel sound to the receiver. When the source is a digital component such as a DVD and is connected to the T V via HDMI, only 2 channel sound will be heard from the receiver.
NOTE ✎
You can only control Anynet x+ devices using the T V remote control, not the buttons on the T V.
The T V remote control may not work under certain conditions. If this occurs, reselect the Anynet x+ device.
The Anynet x+ functions do not operate with other manufacturers’ products.
Troubleshooting for Anynet ¦+
ProblemPossible Solution
Anynet+ does not work.Check if the device is an Anynet•	+ device. The Anynet+ system supports Anynet+ devices only.Connect only one receiver (home theatre).•	Check if the Anynet•	+ device power cord is properly connected.Check the Anynet•	+ device’s Video/Audio/HDMI Cable connections.Check whether Anynet•	+ (HDMI-CEC) is set to On in the Anynet+ setup menu.Check whether the TV remote control is in TV mode.•	Check whether it is Anynet•	+ exclusive remote control.Anynet•	+ does not work in certain situations. (Searching channels, operating Media Play or Plug & Play (Initial setup), etc.)When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off •	and on again.Check if the Anynet•	+ Function of Anynet+ device is set on.
I want to start Anynet+.Check if the Anynet•	+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu.Press the •	TOOLS button to display the Anynet+ menu and select a menu you want.
I want to exit Anynet+.Select •	View TV in the Anynet+ menu.Press the •	SOURCE button on the TV remote control and select a device other than Anynet+ devices.Press •	P >/
						

							32English
Other Information
Analogue Channel Teletext Feature
The index page of the Teletext service gives you information on how to use the service. For Teletext information to be displayed
correctly, channel reception must be stable. Otherwise, information may be missing or some p\
ages may not be displayed.
You can change Teletext pages by pressing the numeric buttons on the remote control. ✎
Other Information
The Teletext pages are organized according to six categories:
PartContentsPartContents
ASelected page number.DDate and time.
BBroadcasting channel identity.EText.
CCurrent page number or search indications.FStatus information. FASTEXT information.
AD
DUAL
SUBT.
ABCDI-II
1
3
4
2
5
7
89
0
!
@
6
1/ (Teletext on/mix): Activate the Teletext mode after selecting the channel providing the Teletext service. Press it twice to overlap the Teletext mode with the current broadcasting screen.
28 (store): Store the Teletext pages. 
34 (size): Display the double-size letters on the upper half of the screen. For the lower half of the screen, press it again. To display the normal screen, press it once again. 
49 (hold): Hold the display on a given page if the selected page is linked with several secondary pages which follow on automatically. To resume, press it again
50 (mode): Select the Teletext mode (LIST/ FLOF). 
If you press this button in the LIST mode, the mode is switched into the List save mode. In the List save mode, you can save a Teletext page into list using the 8(store) button.
61 (sub-page): Display the available sub-page.
2 (page up): Display the next Teletext page.7
3 (page down): Display the previous Teletext page.8
6 (index): Display the index (contents) page at any time while you are viewing Teletext.
9
5 (reveal): Display the hidden text (answers to quiz games, for example). To display the normal screen, press it again. 
0
7 (cancel): Display the current broadcast when searching for a page.
!
Colour buttons (red/green/yellow/blue): If the FASTEXT system is used by a broadcasting company, the different topics covered on a Teletext page are colour-coded and can be selected by pressing the coloured buttons. Press one of them corresponding to the required. The page is displayed with other coloured information that can be selected in the same way. To display the previous or next page, press the corresponding coloured button.
@
BN68-02591D-00Eng.indb   322010-03-16   �� 10:16:58                         
						

							33English
05
Other Information
Installing the Wall Mount
Using the Decoration Covers (19inch model only) ¦
1. When installing the TV on the wall without using the stand, insert decoration covers into th\
e holes as described in the picture 1.
2. After inserting the decoration covers, fasten them with 4 screws as desc\
ribed in the picture 2.
Installing the Wall Mount Kit ¦
Wall mount items (sold separately) allow you to mount the TV on the wal\
l.
For detailed information on installing the wall mount, see the instructi\
ons provided with the Wall Mount items. Contact a technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on \
your own.
Wall Mount Kit Specifications (VESA)  ¦
Wall mount kit is not supplied but sold separately. ✎
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
NOTE ✎
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mo\
unt is used or  xthe consumer fails to follow the product installation instructions.
Standard dimensions for wall mount kits are shown in the table below. xWhen purchasing our wall mount kit, a detailed installation manual and all parts\
 necessary for assembly are provided. xDo not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set. xFor wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ  xdepending on their specifications.
Do not use screws that do not comply with the VESA standard screw specifications. xDo not fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal  xinjury. Samsung is not liable for these kinds of accidents.
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mo\
unt is used or  xthe consumer fails to follow the product installation instructions.
Our 57” and 63” models do not comply with VESA Specifications. The\
refore, you should use our dedicated wall mount kit for this model. x
Do not exceed 15 degrees tilt when mounting this TV. x
Product FamilyinchesVESA Spec. (A * B)Standard ScrewQuantity
LCD-TV
19~2275 X 75
100 X 100M4
4
23~29200 X 100
30~40200 X 200M6
46~55400 X 400
M857~65600 X 400
70~80800 X 400
80~1400 X 800
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.
12
BN68-02591D-00Eng.indb   332010-03-16   �� 10:16:58 
						

							34English
Other Information
Anti-Theft Kensington Lock
The Kensington Lock is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for proper use.
Please find a “ ✎K” icon on the rear of the T V.  A kensington slot is beside the “K” icon.
1. Insert the locking device into the Kensington slot on the LCD TV 1 and turn it in the locking direction 2.
2. Connect the Kensington Lock cable 3.
3. Fix the Kensington Lock to a desk or a heavy stationary object.
The locking device has to be purchased separately. ✎
The location of the Kensington Lock may be different depending  ✎on its model.
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In\
 particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows.
To avoid the TV from falling  ¦
Since the necessary clamps, screws, and string are not supplied,  ✎please purchase these additionally.
1. Drive the screws into the clamps and firmly fasten them onto the wall. Make sure the screws are firmly fixed into the wall. 
Screw Specifications ✎
For a 17 ~ 29 Inch LCD TV: M4 x
For a 32 ~ 40 Inch LCD TV: M6 x
2. Remove the screws from the centre back of the TV, put the screws into the clamps, and then fasten the screws onto the TV again.
3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string tightly.
Verify all connections are properly secured. Periodically check  ✎connections for any sign of fatigue for failure. If you have any doubt about the security of your connections, contact a professional installer.
Install the TV near to the wall so that it does not fall backwards. ✎
It is safe to connect the string so that the clamps fixed on the wall ar\
e equal to or lower than the clamps fixed on the TV. ✎
Untie the string before moving the TV. ✎
1
2
3

Wall
BN68-02591D-00Eng.indb   342010-03-16   �� 10:16:59                                 
						

							35English
05
Other Information
Troubleshooting
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit  “www.samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual.
IssuesSolutions and Explanations
Picture QualityFirst of all, please perform the Picture Test and confirm that your TV is properly displaying test image. (go to MENU - Support - Self Diagnosis - Picture Test) (P. 20)If the test image is properly displayed, the poor picture may caused by the source or signal.
The TV image does not look as good as it did in the store.If you have an analogue cable/set top box, upgrade to a digital set top \
box. Use HDMI or Component •	cables to deliver HD (high definition) picture quality.Cable/Satellite subscribers: Try HD stations from the channel line up.•	Antenna connection: Try HD stations after performing Auto programme.•	Many HD channels are upscaled from SD(Standard Definition) contents. ✎Adjust the Cable/Set top box video output resolution to 1080i or 720p.•	Make sure you are watching the TV at the minimum recommended distance based on the size and •	definition of the signal.
The picture is distorted: macroblock error, small block, dots, pixelizationCompression of video contents may cause picture distortion especially in fast moving pictures such •	as sports and action movies.Low signal level or bad quality can cause picture distortion. This is not a TV issue.•	
Colour is wrong or missing.If you are using a component connection, make sure the component cables are connected to the •	correct jacks. Incorrect or loose connections may cause colour problems or a blank screen.
There is poor colour or brightness.Adjust the •	Picture options in the TV menu. (go to Picture mode / Colour / Brightness / Sharpness)Adjust •	Energy Saving option in the TV menu. (go to MENU - Picture - ECO solution - Energy Saving) (P. 14)Try resetting the picture to view the default picture settings. (go to •	MENU - Picture - Picture Reset)
There is a dotted line on the edge of the screen.If the picture size is set to •	Screen Fit, change it to 16:9. (P. 15)Change cable/set top box resolution.•	
The picture is black and white.If you are using an AV composite input, connect the video cable (yellow) to the Green jack of •	component input 1 on the TV.
When changing channels, the picture freezes or is distorted or delayed.If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until •	the cable box reboots. It may take up to 20 minutes.Set the output resolution of the cable box to 1080i or 720p.•	
Sound QualityFirst of all, please perform the Sound Test to confirm that your TV audio is properly operating.(go to MENU - Support - Self Diagnosis - Sound Test) (P. 20)If the audio is OK, the sound problem may caused by the source or signal.
There is no sound or the sound is too low at maximum volume.Please check the volume the of external device connected to your TV.•	
The picture is good but there is no sound.Set the •	Speaker Select option to TV speaker in the sound menu. (P. 17)If you are using an external device, make sure the audio cables are connected to the correct audio •	input jacks on the TV.If you are using an external device, check the device’s audio output option (ex. you may need to •	change your cable box’s audio option to HDMI when you have a HDMI connected to your TV).If you are using a DVI to HDMI cable, a separate audio cable is required.•	If your TV has a headphone jack, make sure there is nothing plugged into it.•	
The speakers are making an inappropriate noise.Check the cable connections. Make sure a video cable is not connected to an audio input.•	For antenna or cable connections, check the signal strength. Low signal level may cause sound •	distortion.
BN68-02591D-00Eng.indb   352010-03-16   �� 10:17:00 
						

							36English
Other Information
IssuesSolutions and Explanations
No Picture, No Video
The TV will not turn on.Make sure the AC power cord is securely plugged in to the wall outlet and the TV.•	Make sure the wall outlet is working.•	Try pressing the •	POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “The remote control does not work” below.
The TV turns off automatically.Ensure the •	Sleep Timer is set to Off in the Setup menu. (P. 18)If your PC is connected to the TV, check your PC power settings.•	Make sure the AC power cord is plugged in securely to the wall outlet and the TV.•	When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if •	there is no signal.
There is picture/Video.Check cable connections (remove and reconnect all cables connected to the TV and external •	devices).Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to\
 match the •	connections to the TV input. For example, if an external device’s output is HDMI, it should be connect to an HDMI input on the TV.Make sure your connected devices are powered on.•	Be sure to select the TV’s correct source by pressing the •	SOURCE button on the TV remote.
RF(Cable/Antenna) Connection
The TV is not receiving all channels.Make sure the Antenna cable is connected securely.•	Please try •	Plug & Play (Initial setup) to add available channels to the channel list. Go to \
MENU - Setup - Plug & Play (Initial setup) and wait for all available channels to be stored.Verify the Antenna is positioned correctly.•	
The picture is distorted: macroblock error small block, dots, pixelizationCompression of video contents may cause picture distortion, especially with fast moving pictures •	such as sports and action movies.A low signal can cause picture distortion. This is not a TV issue.•	
PC Connection
A “Not Supported Mode” message appears.Set your PC’s output resolution and frequency so they match the resolutions supported by the TV. (P. •	22)
“PC” is always shown on the source list, even if a PC is not connected.This is normal; “PC” is always shown on the source list, regardless of whether a PC is connected.•	
The video is OK but there is no audio.If you are using a HDMI connection, check the audio output setting on your PC.•	
Others
The picture will not display in full screen.HD channels will have black bars on either side of the screen when displaying upscaled SD (4:3) •	contents.Black bars on  the top and bottom will appear during movies that have as\
pect ratios different from •	your TV.Adjust the picture size options on your external device or TV to full screen.•	
The remote control does not work.Replace the remote control batteries with the poles (+/–) in the right direction.•	Clean the sensor’s transmission window on the remote.•	Try pointing the remote directly at the TV from 5~6 feet away.•	
The cable/set top box remote control does not turn the TV on or off, or adjust the volume.
Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set user •	manual for the SAMSUNG TV code.
A “Not Supported Mode” message appears.Check the supported resolution of the TV, and adjust the external device’s output resolution •	accordingly. Refer to the resolution settings on page 22 of this manual.
There is a plastic smell from the TV.This smell is normal and will dissipate over time.•	
The TV Signal Information is unavailable in the Self Diagnostic Test menu.This function is only available with digital channels from an Antenna / RF/Coax connection. (P. 20)•	
The TV is tilted to the side.Remove the base stand from the TV and reassemble it.•	
There are difficulties assembling the stand base.Make sure the TV is placed on a flat surface. If you can not remove the screws from the TV, please •	use a magnetized screw driver.
The channel menu is greyed out. (unavailable)The •	Channel menu is only available when the TV source is selected.
BN68-02591D-00Eng.indb   362010-03-16   �� 10:17:00 
						

							37English
05
Other Information
IssuesSolutions and Explanations
Your settings are lost after 30 minutes or every time the TV is turned off.If the TV is in the •	Store Demo mode, it will reset audio and picture settings every 30 minutes. Change the settings from Store Demo mode to Home Use mode in the Plug & Play (Initial setup) procedure. Press the SOURCE button to select TV mode, and go to MENU → Setup → Plug & Play (Initial setup) → ENTERE.
You have intermittent loss of audio or video.Check the cable connections and reconnect them. •	Loss of audio or video can be caused by using overly rigid or thick cabl\
es. Make sure the cables are •	flexible enough for long term use. If mounting the TV to the wall, we \
recommend using cables with 90 degree connectors.
You see small particles when you look closely at the edge of the frame of the TV.This is part of the product’s design and is not a defect.•	
The PIP menu is not available.PIP•	 functionality is only available when you are using a HDMI, PC or components source.
The message “Scramble signal” or “Weak Signal/No Signal” appears.If you are using a CAM CARD (CI/CI+), check that it is installed into the commo\
n interface slot.•	If there is still a problem, pull the CAM CARD out of the TV and insert it into the slot again\
.•	
You turned the TV off 45 minutes ago, and it turned on again.It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware •	downloaded whilst your watching TV.
There are recurrent picture/sound issues.Check and change the signal/source.•	
A reaction may occur between the rubber cushion pads on the base stand and the top finish of some furniture.
To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.•	
This TFT LCD panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However,  ✎there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
Licence ¦
Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and t\
he Symbol are registered trademarks. & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc. Product Includes software. © DTS, Inc. All Rights Reserved.
DivX Certified to play DivX video up to HD 1080p, including premium content.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. \
 Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.  Pat. 7,295,673;7,460,688; 7,519,274
Open source license notice
In the case of using open source software, Open Source Licenses are available on the product menu.
BN68-02591D-00Eng.indb   372010-03-16   �� 10:17:01 
						

							38English
Other Information
Specifications
Panel native1360 X 768 @ 60 HzEnvironmental ConsiderationsOperating TemperatureOperating HumidityStorage TemperatureStorage Humidity
10°C to 40°C (50°F to 104°F)10% to 80%, non-condensing-20°C to 45°C (-4°F to 113°F)5% to 95%, non-condensingTV System Analogue : Depending on your country selectionDigital : DVB-T/DVB-CColour/video systemAnalogue : PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60Digital : MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, [email protected], [email protected] SystemBG. OK NICAM. MPEGlHDMI IN 1 ~ 3Video : 1080/24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480iAudio : Two Channel Linear PCM 32/44.1/48 kHz, 16/20/24bitsAnalogue audio input (HDMI IN1 only)PC InputStand Swivel(Left / Right)-20˚ ~ 20˚
Model NameLE19C450 / LE19C451LE22C450 / LE22C451
Screen Size (Diagonal)19 inch22 inchSoundOutput3W X 2Dimensions (WxDxH)BodyWith stand461.3 x 59.2 x 309.1 (mm)461.3 x 180.2 x 348.0 (mm)533.2 x 60.8 x 354.4 (mm)533.2 x 171.9 x 402.5 (mm)WeightBodyWith Stand3.9 kg4.45 kg4.75 kg5.13 kg
Design and specifications are subject to change without prior notice. ✎
For the power supply and power consumption, refer to the label attached to the product. ✎
BN68-02591D-00Eng.indb   382010-03-16   �� 10:17:01 
						

							39English
05
Other Information
Index
A
Amplify  16
Antenna  12
Anynet+  29
Audio Out   8, 29
Auto Adjustment   15
Auto Volume  17
B
Background Music  27
Balance L/R  16
Basic View  27
Batteries   5
Black Tone  14
Blanking Bracket  33
Brightness  13
C
Change PIN  6, 19
Channel Manager   11
Clock  18
Colour Tone  14
Component   7
Connecting to a PC  22
Connecting to an Audio Device   8
D
Digital Audio Out  8, 29
DivX® VOD  28
D-sub   22
Dynamic  13
Dynamic Contrast  14
E
Edit Name   9
Editing Channels  12
Energy Saving  14
Equalizer  16
External Speaker  17
EPG 10
F
Favourites Channel  11
Film Mode  15
Fine Tune  13
Flesh Tone  14
Frequency  12
H
HDMI 7, 29
Headphones   8
Home Theatre 8, 29
I
Installation Space  2
L
Language  19
Licence  37
Lock  13
M
Media Play  23
Melody  19
Menu Transparency  19
Music  26
N
Navigate   9
Now & Next guide 10
O
ON/OFF button 5
Optimal resolution 22
P
Photos  26
Picture Size  15, 27
PIP (Picture in Picture)   20
Plug & Play   6
Power Indicator  4
R
Receiver  31
Recording  30
Remote Control   5
Repeat Mode  27
RGB Only Mode  14
Rotate  28
S
Select All  13
Self Diagnosis  20
Sharpness  13
Signal Information  20
Sleep Timer  18
Slide Show  26
Software Upgrade  20
Source List   9
Speaker Select  17
Specifications  38
Standby mode   4
Subtitle  19
Symbol   3
T
Timer  18
Title  27
Tools   3
Troubleshooting  35
TV Speaker  17
U
USB 20, 23
Using Channel View 10
Using Scheduled View 10
Using the Favourite Channels 11
V
VCR   9
Video Formats  25
Videos  24
Volume  4, 5, 17
W
Wall Mount   33
Warm  14
White Balance  14
BN68-02591D-00Eng.indb   392010-03-16   �� 10:17:01 
						

							•  
The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation.  To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.
  -  Do not cover the slots and openings with a cloth or other materials. -  Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface. -    Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided. -  Give your product 10 cm (4 inch) clearance from the wall.• Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight.•  
Do not place heat generating items such as candles, ashtrays, incense, flammable gas or explosive materials near the product.• Do not place a water containing vessel on this apparatus, as this can result in a risk of fire  or electric shock.•  
Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately. Make sure to pull out the power cord from the outlet before cleaning.•  
This apparatus use batteries. In your community there might be regulations that require you to dispose of these batteries  properly under environmental considerations. Please contact your local authorities for disposal or recycling information.•   
Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.•  
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them,  paying particular attention to cords at plug end, adaptors and the point where they exit from the appliance.•  
To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.  This will prevent damage to the set due to lightning and power line surges.•  
Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local electrical supply.•  
Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric shock.•  
To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.•   
Make sure to plug the power cord in until it is firmly inserted. When removing the power cord, make sure to hold the power plug when pulling the plug from the outlet. Do not touch the power cord with wet hands.• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it  - unplug it immediately and contact an authorized dealer or service center.•  
Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially when children, elderly or disabled people will be left alone in the house).    -    Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to generate sparks and heat or the insulation to deteriorate.•  
Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low temperatures,high humidity, chemical substances and where it operates for 24 hours such as the airport, the train station etc. Failure to do so may cause serious damage to your set.• Use only a properly grounded plug and receptacle.   -  An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)•  
To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.• Do not allow children to hang onto the product.• Store the accessories (battery, etc.) in a location safely out of the reach of children.•   Do not install the product in an unstable location such as a shaky self, a slanted floor or a location exposed to vibration.•  Do not drop or impart any shock to the product. If the product is damage\
d, disconnect the power cord and contact a service center.
 
  
WARNING - TO PREVENT THE SPREAD OF FIRE, 
KEEP CANDLES OR OTHER OPEN FLAMES AWAY 
FROM THIS PRODUCT AT ALL TIMES.
Please read the appropriate section that corresponds to the marking on y\
our Samsung product beforeattempting to install the product.
Warning! Important Safety Instructions
CAUTION
 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVIC-ING TO QUALIFIED PERSONNEL.
RISK OF  ELECTRIC SHOCK DO NOT  OPEN
This symbol indicates that high voltage is  present inside. It is dangerous to make any kind of contact with any internal part of this product.
This symbol alerts you that important literature  concerning operation and maintenance has been included with this product.
BN68-02591D-00Eng.indb   402010-03-16   �� 10:17:01