Samsung LE 19C450 User Manual

							21English
03
Basic Features
By Channel ■: Upgrade the software using the broadcasting signal.
If the function is selected during the software  ✎transmission period, software will be automatically searched and downloaded. 
The time required to download the software is  ✎determined by the signal status.
Standby Mode Upgrade ■: A manual upgrade will be automatically performed at selected time. Since the power of the unit is turned on internally, the screen may be turned on slightly for the LCD product. This phenomenon may continue for more than 1 hour until the software upgrade is complete.
Alternative  ■Software (backup): If there is an issue with the new firmware and it is affecting operation, you can change the software to the previous version.
If  ✎the software was changed, existing software is displayed.
HD Connection Guide
Refer to this information when connecting external devices to the TV.
Contact Samsung
View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centres, and how to download products and software.
BN68-02591D-00Eng.indb   212010-03-16   �� 10:16:45 
						

							22English
Advanced Features
Connecting to a PC
Using an HDMI/DVI Cable / a D-sub Cable
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1360 X 768 @ 60 Hz.
ModeResolutionHorizontal Frequency(KHz)Vertical Frequency(Hz)Pixel Clock Frequency(MHz)Sync Polarity(H/V)
IBM640 x 35031.46970.08625.175+ / -
720 x 40031.46970.08728.322- / +
MAC640 x 48035.00066.66730.240- / -
832 x 62449.72674.55157.284- / -
VESA DMT
640 x 480
31.46959.94025.175- / -
37.86172.80931.500- / -
37.50075.00031.500- / -
800 x 600
37.87960.31740.000+ / +
48.07772.18850.000+ / +
46.87575.00049.500+ / +
1024 x 768
48.36360.00465.000- / -
56.47670.06975.000- / -
60.02375.02978.750+ / +
1280 x 72045.00060.00074.250+ / +
1360 x 76847.71260.01585.500+ / +
VESA CVT720 x 57635.91059.95032.750- / +
1280 x 72056.45674.77795.750- / +
VESA GTF1280 x 72052.50070.00089.040- / +
NOTE ✎
For HDMI/DVI cable connection, you must use the  xHDMI (DVI) IN jack.
The interlace mode is not supported. x
The set might operate abnormally if a non-standard video format is selected. x
Separate and Composite modes are supported. SOG(Sync On Green) is not supported. x
R-AUDIO-LPRPBY
AUDIO OUT
R-AUDIO-LPRPBY
AUDIO OUT
R-AUDIO-LPRPBY
DVI OUT
R-AUDIO-LPRPBY
PC OUT
Advanced Features
BN68-02591D-00Eng.indb   222010-03-16   �� 10:16:47          
						

							23English
04
Advanced Features
Media Play
Connecting a USB Device ¦
1. Turn on your TV.
2. Connect a USB device containing photo, music and/or movie files to the\
 USB jack on the side of the TV.
3. When USB is connected to the TV, popup window appears. Then you can select Media Play.
It might not work properly with unlicensed multimedia files. ✎
Need-to-Know List before using  ✎Media Play
MTP (Media Transfer Protocol) is not supported. x
The file system supports FAT16, FAT32 and NTFS. x
Certain types of USB Digital camera and audio devices may not be comp  atible with this T V. x
Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only  xTransport device. Examples of MSC are Thumb drives, Flash Card Readers (USB HUB are not supported). Devices should be connected directly to the T V’s USB port. 
Before connecting your device to the T V, please back up your files to prevent them from damage or loss of data.  xSAMSUNG is not responsible for any data file damage or data loss.
Do not disconnect the USB device while it is loading. x
The higher the resolution of the image, the longer it takes to display on the screen. x
The maximum supported JPEG resolution is 15360X8640 pixels. x
For unsupported or corrupted files, the “Not Supported File Format” message is displayed. x
If the files are sorted by Basic View, up to 1000 files can be displayed in each folder. x
MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management  x(DRM) is a technology that supports the creation of content, the distribution and management of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well as managing billings and settlements.
If more than 2 PTP devices are connected, you can only use one at a time. x
If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high  xpower (more than 500mA or 5V) may not be supported.
If an over-power warning message is displayed while you are connecting or using a USB device, the device may not  xbe recognized or may malfunction.
If the T V has been no input during time set in Auto Protection Time, the Screensaver will run. x
If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read. x
If a USB device connected to the T V is not recognized, the list of files on the device is corrupted or a file in the list is  xnot played, connect the USB device to the PC, format the device and check the connection.
If a file deleted from the PC is still found when Media Play is run, use the “Empty the Recycle Bin” function on the PC  xto permanently delete the file.
Enjoy photos, music and/or movie files saved on a USB Mass Storage Class (MSC) device.
USB Drive
TV Rear Panel
P
POWER
SUM Change Device View Devices    E Enter    R Return
MediaPlay
Videos
BN68-02591D-00Eng.indb   232010-03-16   �� 10:16:49  
						

							24English
Advanced Features
Screen Display ¦
Move to the desired file using the up/down/right/left buttons and then press the ENTERE or � (Play) button. The file is played. 
Supports the  ✎Device Mode and Contents Mode in Media Play homepage. 
 
File List Section :You can confirm the files and groups that is sorted by each category.
Operation Button A Red (Change Device) : Selects a connected device.B Green (Preference)  : Sets the file preference. (not supported in Basic view)C Yellow (Select) :  Selects multiple files from file list. Selected files are marked with a symbolD Blue (Sorting)  : Select the sort listT Tools button :   Displays the option menu.
Using the   ✎� or μ button, file list can move to next or previous page.
Information :You can ascertain the selected file name and the number of files and page.
Sort List Section :Displays sorting standard.
Sorting standard is different  ✎depending on the contents.
Videos
Playing a Video
1. Press the ◄ or ► button to select Videos, then press the ENTERE button in the Media Play menu.
2. Press the ◄/►/▲/▼ button to select the desired video in the file list.
3. Press the ENTERE button or � (Play) button.
The selected file is displayed on the top with its playing time. –
If video time information is unknown, play time and progress bar are not displayed. –
During video playback, you can search using  –◄ and ► button.  
In this mode, you can enjoy movie clips contained on a Game,   ✎but you cannot play the Game itself. 
Supported Subtitle Formats y
Name File extension Format
MPEG-4 time-based text .ttxtXML
SAMI .smiHTML
SubRip .srtstring-based
SubViewer .substring-based
Micro DVD .sub or .txtstring-based
Movie 01.avi00:04:03 / 00:07:38
1/1
SUME Pause  L  Jump  T Tools  R Return
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010 Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
/Movie 01.avi
1/1
Movie 01.avi
SUM Movie 03.avi
Movie 05.avi
Movie 07.avi
Movie 09.avi
Movie 02.avi
Movie 04.avi
Movie 06.avi
Movie 08.avi
Movie 10.avi
  Select     Sorting    T Tools
VideosPage
A Change Device
BN68-02591D-00Eng.indb   242010-03-16   �� 10:16:51 
						

							25English
04
Advanced Features
Supported Video Formats y
File ExtentionContainerVideo CodecResolutionFrame rate (fps)Bit rate (Mbsp)Audio Codec
*.avi*.mkvAVI MKV
Divx 3.11 / 4.x / 5.1 / 6.01920x10806 ~ 308
MP3 / AC3 / LPCM / ADPCM / DTS HD
XviD1920x10806 ~ 308
H.264 BP / MP / HP1920x10806 ~ 3025
MPEG4 SP / ASP1920x10806 ~ 308
*.asfASF
Divx 3.11 / 4.x / 5.1 / 6.01920x10806 ~ 308
MP3 / AC3 / LPCM / ADPCM / WMA
XviD1920x10806 ~ 308
H.264 BP / MP / HP1920x10806 ~ 3025
MPEG4 SP / ASP1920x10806 ~ 308
*.wmvASFWindow Media Video v91920x10806 ~ 3025WMA
*.mp4MP4
H.264 BP / MP / HP1920x10806 ~ 3025
 MP3 / ADPCM / AACMPEG4 SP / ASP1920x10806 ~ 308
XVID1920x10806 ~ 308
*.3gp3GPPH.264 BP / MP / HP1920x10806 ~ 3025ADPCM / AAC / HE-AACMPEG4 SP / ASP1920x10806 ~ 308
*.vroVRO VOB
MPEG1 1920x108024 / 25 / 3030AC3 / MPEG / LPCMMPEG21920x108024 / 25 / 3030
*.mpg*.mpegPS
MPEG11920x108024 / 25 / 3030
AC3 / MPEG / LPCM / AACMPEG21920x108024 / 25 / 3030
H.2641920x10806 ~ 3025
*.ts*.tp*.trpTS
MPEG21920x108024 / 25 / 3030AC3 / AAC / MP3 / DD+ / HE-AACH.2641920x10806 ~ 3025
VC11920x10806 ~ 3025
Other Restrictions
NOTE ✎
If there are problems with the contents of a codec, the codec will not be supported. x
If the information for a Container is incorrect and the file is in error, the Container will not be able to play  xcorrectly.
Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Fram/sec  xlisted in the table above.
If the Index Table is in error, the Seek (Jump) function is not supported. x
Video DecoderAudio Decoder
Supports up to H.264, Level 4.1•	H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not •	supported.H.263 is not supported. •	GMC 2 over is not support. •	
Supports up to WMA 7, 8, 9, STD•	WMA 9 PRO does not support 2 channel excess multi channel or •	lossless audio.WMA sampling rate 22050Hz mono is not supported.•	
BN68-02591D-00Eng.indb   252010-03-16   �� 10:16:51 
						

							26English
Advanced Features
Playing movie continuously (Resume Play)
If you exit the playing movie function, the movie can be played later fr\
om the point where it was stopped.
1. Select the movie file you want to play continuously by pressing the ◄ or ► button to select it from the file list section.
2. Press the �(Play) / ENTERE button.
3. Select Play Continuously (Resume Play) by pressing the Blue button (D). The Movie will begin to play from where it was stopped.
The blue button is available when resuming play. ✎
If the  ✎Cont. movie play help function is set to On in the Settings menu, a pop-up message will appear when you resume play a movie file.
Music
Playing a Music
1. Press the ◄ or ► button to select Music, then press the ENTERE button in the Media Play menu.
2.  Press the ◄/►/▲/▼ button to select the desired Music in the file list.
3. Press the ENTERE button or � (Play) button.
During music playback, you can search using  –◄ and ► button.
�  –(REW) and μ (FF) buttons do not function during play.
Only displays files with the MP3 file extension. Other file  ✎extensions are not displayed, even if they are saved on the same USB device.
If the sound is strange when playing MP3 files, adjust the  ✎Equalizer in the Sound menu. (An over-modulated MP3 file may cause a sound problem.)
3/15I Love you
Jhon
Music 1No SingerMusic 2No SingerMusic 3No SingerMusic 4No SingerMusic 5No Singer
I Love You
Jhon
1st Album
Pop
2010
4.2MB
01:10 / 04:02
SUME Pause   L Jump   T Tools   R Return
Playlist
Photos
Viewing a Photo (or Slide Show)
1. Press the ◄ or ► button to select Photos, then press the ENTERE button in the Media Play menu.
2.  Press the ◄/►/▲/▼ button to select the desired photo in the file list.
3. Press the ENTERE button or � (Play) button.
While a photo list is displayed, press the (Play) /  –ENTERE button on the remote control to start slide show.
All files in the file list section will be displayed in the slide sh\
ow. –
During the slide show, files are displayed in order from currently  –being shown.
Music files can be automatically played during the Slide Show if  ✎the Background Music is set to On.
The  ✎BGM Mode cannot be changed until the BGM has finished loading.
Image1024.jpg          1024x768  2010/2/1 3/15
SUME Pause   L Previous/Next   T Tools   R Return
Normal
Movie 01.avi
00:04:03 / 00:07:38
1/1
SUM Play continuously  E Pause L Jump  T Tools  R Return
Resumes playing from the last viewed scene.
 Play continuously
BN68-02591D-00Eng.indb   262010-03-16   �� 10:16:55 
						

							27English
04
Advanced Features
Playing the multiple files  ¦
Playing the selected video/music/photo files
1. Press the Yellow button in the file list to select the desired file.
2.  Repeat the above operation to select multiple files.
NOTE ✎
The ( xc) mark appears to the left of the selected files.
To cancel a selection, press the yellow button again.  x
To deselect all selected files, press the  xTOOLS button and select Deselect All.
3.  Press the �(Play) / ENTERE button.
Playing the video/music/photo file group
1.  While a file list is displayed, move to the any file in desired group.
2.  Press the TOOLS button and select Play Current Group.
1/1/Movie 01.avi
SUM
Movie 01.avi Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010 Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Movie 03.avi
Movie 05.avi
Movie 07.avi
Movie 09.avi Movie 02.avi
Movie 04.avi
Movie 06.avi
Movie 08.avi
Movie 10.avi
 Change Device Select     Sorting  T Tools
Videos
2 files selected
Page
Media Play Additional Function ¦
Sorting the file list
Press the blue button in the file list to sort the files.
CategoryOperationsVideosMusicPhotos
Basic ViewDisplays the whole folder. You can view the photo by selecting the folder.✓✓✓
TitleSorts and displays the file title in Symbol/Number/Alphabet/Special or\
der.✓✓✓
PreferenceSorts and displays the file by preference. You can change the file preference in the file list section using the Green button.✓✓✓
Latest DateSorts and shows files by the latest date.✓✓
Earliest DateSorts and shows files by the earliest date.✓✓
ArtistSorts the music file by artist in alphabetical order.✓
AlbumSorts the music file by album in alphabetical order.✓
GenreSorts music files by the genre.✓
MoodSorts music files by the mood. You can change the music mood information.✓
MonthlySorts and shows photo files by month.✓
BN68-02591D-00Eng.indb   272010-03-16   �� 10:16:56 
						

							28English
Advanced Features
Videos/Music/Photos Play Option menu
During playing a file, press the TOOLS button.
CategoryOperationVideosMusicPhotos
TitleYou can move the other file directly.✓
Repeat ModeYou can play movie and music files repeatedly.✓✓
Picture Size (Mode1 / Mode2 / Original)You can adjust the picture size to your preference.✓
Picture SettingYou can adjust the picture setting. (p. 13, 14, 15, 16)✓✓
Sound SettingYou can adjust the sound setting. (p. 16, 17)✓✓✓
Subtitle SettingYou can play the video with Subtitles. This function only works if the su\
btitles are the same file name as the video.✓
AudioYou can enjoy video in one of supported languages as required. The function is only enabled when stream-type files which support multiple audio formats are played. ✓
Stop Slide Show / Start Slide ShowYou can start or stop a Slide Show.✓
Slide Show SpeedYou can select the slide show speed during the slide show.✓
Background MusicYou can set and select background music when watching a Slide Show.✓
ZoomYou can zoom into images in full screen mode.✓
RotateYou can rotate images in full screen mode.✓
InformationYou can see detailed information about the played file.✓✓✓
Settings
Using the Setup Menu
Cont. movie play help (resume play) (On / Off) ■: Select to display the help pop-up message for continuous movie playback.
Get the DivX ■® VOD registration code: Shows the registration code authorized for the TV. If you connect to the DivX web site and register the registration code with a personal account, you can download VOD registration file. If you play the VOD registration using Media Play, the registration is completed.
For more information on DivX ✎® VOD, visit www.DivX.com.
Get the DivX ■® VOD deactivation code: When DivX® VOD is not registered, the registration deactivation code is displayed. If you execute this function when DivX® VOD is registered, the current DivX® VOD registration is deactivated.
Information ■: Select to view information about the connected device.
BN68-02591D-00Eng.indb   282010-03-16   �� 10:16:56 
						

							29English
04
Advanced Features
Anynet+ 
What is Anynet+? t
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
To connect to Home Theatre
1. Connect the HDMI (DVI) IN jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable.
2. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable.
NOTE ✎ 
Connect the Optical cable between the  xDIGITAL AUDIO OUT (OPTICAL) jack on your T V and the Digital Audio Input on the Home Theatre.
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from  xthe Home Theatre’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / satellite box (i.e. Anynet+ Device 1 or 2) directly to the Amplifier or Home Theatre, not the T V.
Connect only one Home Theatre. x
You can connect an Anynet x+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.
Anynet x+ works when the AV device supporting Anynet+ is in the standby or on status.
Anynet x+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ MenuDescription
View TVChanges Anynet+ mode to TV broadcast mode.
Device ListShows the Anynet+ device list.
Recording: (*recorder)Starts recording immediately using the recorder. (This is only available for devices that support the recording function.)
(device_name) MENUShows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the DVD recorder will appear.
(device_name) INFOShows the play menu of the connected device. E.g. If a DVD recorder is connected, the play menu of the DVD recorder will appear.
Stop Recording: (*recorder)Stops recording.
ReceiverSound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it will be represented as (*device_name).
Anynet+ Device 1
HDMI Cable
HDMI Cable
TV
Optical Cable
Home TheatreAnynet+ Device 2, 3
BN68-02591D-00Eng.indb   292010-03-16   �� 10:16:56          
						

							30English
Advanced Features
Setting Up Anynet ¦+ 
Setup ■
Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
When the  ✎Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.
The active source on the T V must be set to T V to use the Anynet ✎+ function.
Even if an external device is still recording, it may turn off. ✎
Switching between Anynet ¦+ Devices 
1. Anynet+ devices connected to the TV are listed.
If you cannot find a device you want, press the red button to refresh the list. ✎
2. Select a device and press the ENTERE button. You can switch to the selected device.
Only when you set  ✎Anynet+ (HDMI-CEC) to On in the Application menu, the Device List menu appears.
Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching  xoperation.
If you have selected external input mode by pressing the  xSOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List.
Recording  ¦
You can make a recording of a TV programme using a Samsung recorder.
1. Select Recording.
When there are more than two recording devices ✎
When multiple recording devices are connected, the recording devices are listed. Select one recording device in  xthe Device List.
When the recording device is not displayed, select  ✎Device List and press the Red button to search devices.
2. Press the EXIT button to exit.
You can record the source streams by selecting  ✎Recording: (device_name).
Pressing the  ✎� (REC) button will record whatever you are currently watching. If you are watching video from another device, the video from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly  ✎connect an antenna to a recording device, refer to the recording device’s users manual.
BN68-02591D-00Eng.indb   302010-03-16   �� 10:16:57