Samsung LCD TV LVQ-32EF1A User Manual

0
Chapter   Introducing the LCD TV

Your LCD TV
LED	The LED light indicates when the LCD TV is activated.
IRInfrared Receiver
Front/Right Side View and Controls
MENU Press once to display the OSD (on screen display), press again to turn the OSD off.
VOLUME+ -Adjusts the volume up and down. Selects the main-menu item and change values for items when in the OSD mode.
Turns the LCD TV on and into standby mode.
CHANNEL▲▼Scans up and down through channels. Selects sub-menu item when in the OSD...

HDMI 2 INHDMI 1 IN
AUDIO
LRLRLR
LR
L
RLRLR
AUDIO
VGA IN
VIDEO2 INVIDEOAUDIOS-VIDEO INS-VIDEOAUDIO
YPbPr1 INAUDIO OUT
STEREODIGITALOPTICAL
COAXIAL
Air/CableHDTV/TVYPbPrAUDIO
YPbPr2 IN
YPbPrAUDIOVHF/UHF IN

VGA INConnects the PC, or other AV equipment with VGA and AUDIO(L/R) output jacks.
YPbPr IN/YPbPr INConnects to the DVD player, Digital Set-Top-Box, or other AV equipment with component(YPbPr) video and audio output jacks.
VIDEO INConnects to the composite VIDEO and AUDIO(L/R) output...

OK
POWER
GUIDEEXIT
INFO
LISTFAV.CHTIMERFREEZE
MENU
S.MODE
SLEEP
SWAPPIPP.MODE
MTSMUTE
CAPTIONP.SIZE
123
456
789
JUMP0.
VOL.CH.
AIR/CABLE
SOURCE

Your Remote Control
POWER	Turns the LCD TV on and off.
SWAP Swaps between the main and sub window in PIP/POP mode.
P.MODE Selects picture mode: Vivid/Hi-Bright/Cinema/Sport/User
PIP Turns PIP/POP on and off.
MTS Cycles through the multi-channels TV sound(MTS) options: SAP/MONO/STEREO
S.MODE Selects sound effect options:...


OK
POWER
GUIDEEXIT
INFO
LISTFAV.CHTIMERFREEZE
MENU
S.MODE
SLEEP
SWAPPIPP.MODE
MTSMUTE
CAPTIONP.SIZE
123
456
789
JUMP0.
VOL.CH.
AIR/CABLE
SOURCE
Effective range:The remote can control the LCD TV from up to m away, if  pointed directly at the receiver.



0













0



ENGLISH...


Chapter  Installing the LCD TV

Chapter 2 
Installing the LCD TV
Refer to the owner’s manual of any external equipment to be connected.When connecting any external equipment, do not connect any AC power cords to wall outlets until all other connections are completed.
 Antenna Connection
The antenna requirements for good color TV reception are more important than those for a black &	white TV reception. For this reason, a good quality outdoor antenna is strongly recommended.The following...

ENGLISH

Chapter  Installing the LCD TV

O UTIN

300-ohm twin-lead cable
300-ohm twin-lead cable
75-ohmcoaxial cable
UHFAntenna
VHFAntenna
Combiner(not included)
A.  Combination VHF/UHF antenna
300-ohm twin-lead cable
75-ohmcoaxial cable
VHF/UHFAntenna
VHF/UHFAntenna
300/75-ohm adapter (not included)
B. Separate VHF and/or UHF antennas
Use one of the following two diagrams when connecting an outdoor antenna.A: Shows how to use a VHF/UHF combination outdoor antenna.B: Shows how to use a...


Chapter  Installing the LCD TV

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electrical Code (NEC) that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building accurately, or as close to the point of cable entry as possible. Use of this TV for other than private viewing of programs broadcasted on UHF, VHF or transmitted by cable...

ENGLISH

Chapter  Installing the LCD TV

 Use a supplied antenna cable to connect the TV signal to the LCD TV’s TV CABLE terminal.
 Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.
VHF/UHF IN
Air/CableHDTV/TV
VHF/UHF IN
Air/CableHDTV/TV
 Press the     button on the remote to turn on the LCD TV.
Always disconnect the LCD TV from the main voltage when the LCD TV will not be used for a long period of  time. The POWER button on the front panel is...


Chapter  Installing the LCD TV

 Press the SOURCE button on the remote to display the Input Source List. Use the ▲▼ buttons to select TV and press the OK button.
Input source TV(CABLE/AIR)    VIDEO1 (SIDE) VIDEO2 (REAR)  VIDEO3 (S-VIDEO) VIDEO4 (YPbPr1) VIDEO5 (YPbPr2) VIDEO6 (HDMI)       COMPUTER(VGA)
	Press the OK button to display the received channel list. Then press ▲▼ to select a channel and press again the OK button to display the channel detail. 
The digital main channel might...

	METHOD A:
	Use a composite cable to connect the VCR’s composite video/audio jacks to the LCD TV’s VIDEO2 IN jacks. 	 		METHOD B: Use an audio cable to connect the VCR’s audio output jacks to the LCD TV’s audio inputs. Use a S-Video cable to connect the VCR’s s-video output jack to the LCD TV’s S-VIDEO IN input jack.
	Connect all AC power sources, before turning on the power switch of the LCD TV or other connected equipment.
	Press the      button on the remote to turn on the LCD TV.
	To watch a...