Samsung LCD TV LVQ-32EF1A User Manual

							
0
Chapter   Introducing the LCD TV

Your LCD TV
LED	The LED light indicates when the LCD TV is activated.
IRInfrared Receiver
Front/Right Side View and Controls
MENU Press once to display the OSD (on screen display), press again to turn the OSD off.
VOLUME+ -Adjusts the volume up and down. Selects the main-menu item and change values for items when in the OSD mode.
Turns the LCD TV on and into standby mode.
CHANNEL▲▼Scans up and down through channels. Selects sub-menu item when in the OSD mode.
INPUTChooses from different input signal sources.
LR
VIDEO1IN
VIDEO
AUDIO
EARPHONEConnects to the external headphone for private listening.
VIDEO INConnects to the composite Video and Audio output jacks on external video equipment. 
						

							
HDMI 2 INHDMI 1 IN
AUDIO
LRLRLR
LR
L
RLRLR
AUDIO
VGA IN
VIDEO2 INVIDEOAUDIOS-VIDEO INS-VIDEOAUDIO
YPbPr1 INAUDIO OUT
STEREODIGITALOPTICAL
COAXIAL
Air/CableHDTV/TVYPbPrAUDIO
YPbPr2 IN
YPbPrAUDIOVHF/UHF IN

VGA INConnects the PC, or other AV equipment with VGA and AUDIO(L/R) output jacks.
YPbPr IN/YPbPr INConnects to the DVD player, Digital Set-Top-Box, or other AV equipment with component(YPbPr) video and audio output jacks.
VIDEO INConnects to the composite VIDEO and AUDIO(L/R) output jacks on external video equipment.
HDMI INConnects the all digital AV equipment with HDMI connector.HDMI supports enhanced, high-definition video and two-channel digital audio.  The AUDIO(L/R) of HDMI IN is for DVI connection.
AC INConnects to the AC power cord.
S-VIDEO INConnects to the S-VIDEO and AUDIO(L/R) output jacks on external video equipment.
AUDIO OUT-STEREOConnects to the AUDIO(L/R) input jacks on AV equipment.
AUDIO OUT-DIGITAL-OPTICAL/COAXIALConnects to the DIGITAL AUDIO jack on the digital/standard 5.1 audio system.
AIR/CABLE INConnects RF input from VHF/UHF antenna or cable to receive high/standard definition television.
ENGLISH

Chapter   Introducing the LCD TV
Rear View and Jacks 
						

							
OK
POWER
GUIDEEXIT
INFO
LISTFAV.CHTIMERFREEZE
MENU
S.MODE
SLEEP
SWAPPIPP.MODE
MTSMUTE
CAPTIONP.SIZE
123
456
789
JUMP0.
VOL.CH.
AIR/CABLE
SOURCE

Your Remote Control
POWER	Turns the LCD TV on and off.
SWAP Swaps between the main and sub window in PIP/POP mode.
P.MODE Selects picture mode: Vivid/Hi-Bright/Cinema/Sport/User
PIP Turns PIP/POP on and off.
MTS Cycles through the multi-channels TV sound(MTS) options: SAP/MONO/STEREO
S.MODE Selects sound effect options: Surround/Live/Dance/Techno/Classic/Soft/Rock/Pop/Off.
MUTE Mutes and restores the audio
CAPTION Cycles through the Closed Caption:	  Analog Closed Caption:CC1/CC2/CC3/CC4/TT1/TT2/TT3/TT4/Off
	  Digital Closed Caption:Service1
SLEEP Cycles through the LCD TV sleep timer: OFF/10/20/30/40/50/60/90/120 mins
P.SIZE Cycles through Wide mode settings :FULL/ ZOOM / WIDE /NORMAL
0-  Select and switch to a channel by using 0-9 buttons.
  In TV mode, use with 0-9 and  buttons to select a digital channels.   
JUMP Returns to previously selected channel.
AIR/CABLE Cycles through the TV receiving signal:  AIR(antenna)/Cable(STD/IRC/HRC)
VOL.+- Increases and decreases volume.
CH.▲▼ Scans up and down the channels









0











0









Chapter   Introducing the LCD TV 
						

							

OK
POWER
GUIDEEXIT
INFO
LISTFAV.CHTIMERFREEZE
MENU
S.MODE
SLEEP
SWAPPIPP.MODE
MTSMUTE
CAPTIONP.SIZE
123
456
789
JUMP0.
VOL.CH.
AIR/CABLE
SOURCE
Effective range:The remote can control the LCD TV from up to m away, if  pointed directly at the receiver.



0













0



ENGLISH

Chapter  Installing the LCD TV
GUIDE	Displays the Program Guide on the screen.  Pressing again to turn GUIDE off.
EXIT Exits the OSD menu.
▲▼►◄  Cycles through OSD options and OK selects individual menu items. OK confirms option settings. 
INFO Pressing repeatedly displays a variety of information such as the current channel and the input source.
MENU Displays the OSD menu on the screen.
  For European TV system only.
LIST Displays the received channel list
SOURCE	Pressing SOURCE display the source list, use ▲▼ to select the video equipment connected to the video inputs of your LCD TV : TV/VIDEO1/VIDEO2/VIDEO3/VIDEO4/VIDEO5/VIDEO6/COMPUTER Input source TV(CABLE/AIR)    VIDEO1 (SIDE) VIDEO2 (REAR)  VIDEO3 (S-VIDEO) VIDEO4 (YPbPr1) VIDEO5 (YPbPr2) VIDEO6 (HDMI)       COMPUTER(VGA)
Channel List	5-2  RF5-2 9-1  KQED-HD 9-2  KOED-SD 8       CCT  12    13 15
TIMER  Displays the current time on the screen. 
	FREEZE Pressing FREEZE to freeze the current picture, press again to restore the picture.
FAV.CH Pressing FAV.CH display favorite channels.  
						

							

Chapter  Installing the LCD TV

Chapter 2 
Installing the LCD TV
Refer to the owner’s manual of any external equipment to be connected.When connecting any external equipment, do not connect any AC power cords to wall outlets until all other connections are completed.
 Antenna Connection
The antenna requirements for good color TV reception are more important than those for a black &	white TV reception. For this reason, a good quality outdoor antenna is strongly recommended.The following is a brief explanation of the type of connection that is provided with the various antenna systems.
-ohm coaxial cable (round)
F-type connector
00-ohm twin-lead cable (flat)
■ A -ohm system is generally a round cable (not included) with F-type connector that can easily be attached to a terminal without tools. 
■ A 00-ohm system is a flat twin-lead cable (not included) that can be attached to a  -ohm terminal through a  00--ohm adapter (not included).
Connecting a TV Cable or an Antenna 
						

							
ENGLISH

Chapter  Installing the LCD TV

O UTIN

300-ohm twin-lead cable
300-ohm twin-lead cable
75-ohmcoaxial cable
UHFAntenna
VHFAntenna
Combiner(not included)
A.  Combination VHF/UHF antenna
300-ohm twin-lead cable
75-ohmcoaxial cable
VHF/UHFAntenna
VHF/UHFAntenna
300/75-ohm adapter (not included)
B. Separate VHF and/or UHF antennas
Use one of the following two diagrams when connecting an outdoor antenna.A: Shows how to use a VHF/UHF combination outdoor antenna.B: Shows how to use a separate VHF and/or UHF outdoor antenna. 
						

							

Chapter  Installing the LCD TV

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electrical Code (NEC) that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building accurately, or as close to the point of cable entry as possible. Use of this TV for other than private viewing of programs broadcasted on UHF, VHF or transmitted by cable companies for the use of the general public may require authorization from the broadcast/cable company, and/or program owner. 
	AI NBO UTCable TV Line
2 set signal splitter(not included)
RF switch(not included)
Cable TV converter/descrambler(not included)
Cable TV (CATV)  Connection
 ■ The RF switch (not included) is required to provide two inputs (A and B).  Setting the RF switch to position A allows viewing of  all unscrambled channels by using the TV channel keys.
 ■  Setting the RF switch to position B allows viewing of  all scrambled channels via the converter/descrambler by using the converter channel keys.
■ A  -ohm coaxial cable connector is built into the set for easy hookup. When connecting the  -ohm coaxial cable to the set, connect the  -ohm cable  into the ANT. terminal.
■ Some cable TV companies of fer premium pay channels. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company. 
This converter/descrambler is necessary for normal viewing of scrambled channels. (Set your TV to channel 3 or 4, typically one of these channels is used. If this is unknown, consult your cable TV company.)For more specific instructions on installing cable TV, consult your cable TV company. One possible method of connecting the coverter/descrambler provided by your cable  TV company is shown in the diagram below.
VHF/UHF IN 
						

							
ENGLISH

Chapter  Installing the LCD TV

 Use a supplied antenna cable to connect the TV signal to the LCD TV’s TV CABLE terminal.
 Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.
VHF/UHF IN
Air/CableHDTV/TV
VHF/UHF IN
Air/CableHDTV/TV
 Press the     button on the remote to turn on the LCD TV.
Always disconnect the LCD TV from the main voltage when the LCD TV will not be used for a long period of  time. The POWER button on the front panel is only used for switching the LCD TV into standby, it does not disconnect the device from the main voltage. To completely disconnect the main voltage, please remove the power plug from the socket.  
						

							

Chapter  Installing the LCD TV

 Press the SOURCE button on the remote to display the Input Source List. Use the ▲▼ buttons to select TV and press the OK button.
Input source TV(CABLE/AIR)    VIDEO1 (SIDE) VIDEO2 (REAR)  VIDEO3 (S-VIDEO) VIDEO4 (YPbPr1) VIDEO5 (YPbPr2) VIDEO6 (HDMI)       COMPUTER(VGA)
	Press the OK button to display the received channel list. Then press ▲▼ to select a channel and press again the OK button to display the channel detail. 
The digital main channel might include many subchannels (for example -, -..) that are showing program at the same time. 
The Channel Scanning will create a list of  receivable channels for the currentinput (antenna or cable). You will be required to run Channel Scanning for eachRF input to create a list of  available channels from both inputs.
TV                                                          Select      \
          Exit 
Channel ScanTuner Mode  CableChannel SkipFavorite ListTime Zone Eastern Time
 Press the MENU button on the remote control to display the Main menu, and use the ◄► buttons to select the TV. 
	Press the ▼ button to select Channel Scan, and press the OK button. 	 The	Channel Scan automatically creates a list of receivable channels. Press the MENU	button at any time to interrupt the memorization process.(the list cannot be created if interrupted)
Status: Scanning.....  CableAnalog Channels: Digital Channels: 0 %
Channel List	5-2  RF5-2 9-1  KQED-HD 9-2  KOED-SD 8       CCT  12    13 15
Channel DetailCalfornia’s Gold
Or, use the ▪ (Input button) with 0- buttons to select digital channel( for example 9.1)  
						

							
	METHOD A:
	Use a composite cable to connect the VCR’s composite video/audio jacks to the LCD TV’s VIDEO2 IN jacks. 	 		METHOD B: Use an audio cable to connect the VCR’s audio output jacks to the LCD TV’s audio inputs. Use a S-Video cable to connect the VCR’s s-video output jack to the LCD TV’s S-VIDEO IN input jack.
	Connect all AC power sources, before turning on the power switch of the LCD TV or other connected equipment.
	Press the      button on the remote to turn on the LCD TV.
	To watch a videotape, press the SOURCE button on the remote to select  VIDEO( METHOD A), or VIDEO  (METHOD B).
Connecting a VCR
AB
HDMI 2 INHDMI 1 IN
AUDIO
LRLRLR
LR
L
RLRLR
AUDIO
VGA IN
VIDEO2 INVIDEOAUDIOS-VIDEO INS-VIDEOAUDIO
YPbPr1 INAUDIO OUT
STEREODIGITALOPTICAL
COAXIAL
Air/CableHDTV/TVYPbPrAUDIO
YPbPr2 IN
YPbPrAUDIOVHF/UHF IN
Rear of TV
AUDIO Cable
S-VIDEO Cable
AV Cable
ENGLISH

Chapter  Installing the LCD TV