Home > Samsung > Television > Samsung LCD TV Ltn406w User Manual

Samsung LCD TV Ltn406w User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Samsung LCD TV Ltn406w User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							English-34
    OPERATION
    LNA (Low Noise Amplifier)
    If the TV is operating in a weak-signal area, sometimes the LNA function can improve
    the reception (a low-noise preamplifier boosts the incoming signal).
    2
    Press the DOWN
    button to select “LNA”,
    then press the
    ENTERbutton.
    3
    Press the 
    UP/DOWN
    buttons to set LNA
    “On”.
    Press the MENUbutton
    to exit.
    1
    Press the MENUbutton
    to display the menu.
    Press the DOWN
    button to select 
    “Channel”, then press
    the ENTERbutton.
    Pressing UP/DOWNwill
    alternate between “On” and “Off”.
     venus-04-en  6/3/03 3:08 PM  Page 34 
    						
    							English-35
    Fine Tuning Channels
    Use fine tuning to manually adjust a particular channel for optimal reception.
    1
    Select the appropriate
    channel.
    2Press the MENUbutton
    to display the menu.
    Press the DOWN
    button twice to select
    “Channel”, then press
    the ENTERbutton.
    3
    Press the DOWN
    button to select
    “Fine Tune.”
    4
    Press the RIGHT
    and LEFTbuttons 
    to adjust the fine tuning.
    OPERATION
    If you do not store the channel in
    memory, adjustments to the 
    settings are applied before you 
    change the channel but are not
    saved. Therefore they return to 
    the original settings once you 
    move to another channel. User-
    adjusted channels are marked 
    with an asterisk “ * ” on the 
    right-hand side of the channel 
    number in the channel banner.
     venus-04-en  6/3/03 3:08 PM  Page 35 
    						
    							English-36
    OPERATION
    Viewing Picture-in-Picture
    This product has one tuner built-in, which does not allow PIP to function in
    the same mode. Please see PIP Settings below for details.
    You can use the PIP feature to simultaneously watch two video sources.
    Note: While V-Chip is in operation, the PIP function cannot be used.
    Activating Picture-in-Picture
    PIP Settings
    1
    Press the MENUbutton
    to display the menu.
    Press the DOWNto
    select “Picture”, then
    press the ENTER
    button.Press the
    DOWNto select
    “PIP”.
    2
    Press the ENTER
    button to select PIP
    “On”.
    If you turn the TV off while watching
    and turn it on again, the PIP window
    will disappear.
    Quick way to access the PIP menu:
    Simply press the PIP button on the
    remote control.
    Sub
    PicturePC AnalogPC DVITV
    Tuner1TV
    Tuner2AV1 AV2 S-VHS COMP1 COMP2Main PicturePC Analog
    PC DVI
    TV Tuner1
    TV Tuner2
    AV 1
    AV 2
    S-VHS
    COMP1
    COMP2X
    X
    X
    X
    X
    X
    X
    X
    XX
    X
    X
    X
    X
    X
    X
    X
    XO
    O
    X
    O
    O
    O
    O
    O
    OO
    O
    O
    X
    O
    O
    O
    O
    OO
    O
    O
    O
    X
    O
    O
    O
    OO
    O
    O
    O
    O
    X
    O
    O
    OO
    O
    O
    O
    O
    O
    X
    O
    OO
    O
    O
    O
    O
    O
    O
    X
    XO
    O
    O
    O
    O
    O
    O
    X
    X
    3
    Press the MENUbutton to exit.
    Note: Picture-in-Picture does not function when the 
    V-Chip is active.
     venus-04-en  6/3/03 3:08 PM  Page 36 
    						
    							English-37
    OPERATION
    While the main screen is in
    PC mode, it does not work.When you press the SWAPbutton,
    the image in the PIP window will appear on the
    main screen, and vice versa. 
    Swapping the Contents of the PIP image and Main image
    Press the PIPCH/  button to change the channel
    that appears in the PIP window.
    Changing the PIP Channel
    Press the SIZEbutton to alternate between a 
    smaller and larger PIP window. 
    Changing the Size of the PIP Window
    • You cannot select the PIP window function when the TV set is in   
    energy saving mode. You will see the “Check the cable connection”
    or “Out of input range” message on the screen in PC mode.
    • Press the button once more to deselect PIP mode.
    • You may notice that the picture in the PIP window becomes slightly   
    unnatural when you set the main screen to game or karaoke mode.   
    Switch the main screen and the PIP window for normal viewing.
    • You can adjust picture position only by using the size menu.
     venus-04-en  6/3/03 3:08 PM  Page 37 
    						
    							English-38
    Freezing the Picture
    1
    Press the STILLbutton to freeze a moving picture.
     Not available if V-Chip is turned on.
     Normal sound will still be heard.
    Press again it cancel.
    OPERATION
    Changing the Screen Size
    1
    Press the P.SIZEbutton to change the screen size.
    • Wide : Sets the picture to 16:9 wide mode. 
    • Panorama : Use this mode for the wide aspect ratio of a panoramic picture.
    (However, it does not work in 720p and 1080i modes.)
    • Zoom 1,2 : Magnifies the size of the picture on screen.
    • 4:3 : Sets the picture to 4:3 normal mode.
    This is the standard TV screen size.
     venus-04-en  6/3/03 3:08 PM  Page 38 
    						
    							English-39
    OPERATION
    Adjusting the Background Color
    You can change the color of the entire screen according to your preference.
    2
    Press the DOWN
    button to select 
    “Color Tone”, then
    press the ENTER
    button.
    1
    Press the MENUbutton
    to display the menu.
    Press the DOWN
    button to select 
    “Picture”, then press
    the ENTERbutton.
    3
    Press the 
    UP/DOWN
    buttons to select 
    Color Tone.
    Press the MENUbutton
    to exit.
    The customer can select Color Tone:
    “Cool 2”, “Cool 1”, “Standard”,
    “Warm 1”, “Warm 2” according to
    personal preference.
     venus-04-en  6/3/03 3:08 PM  Page 39 
    						
    							English-40
    OPERATION
    Setting the DNIe
    Samsung’s New Technology brings you more detailed images with contrast and white
    enhancement and 3D noise reduction.
    2
    Press the DOWN
    button to select “DNIe”,
    then press the
    ENTERbutton.
    3
    Press the 
    UP/DOWN
    buttons to select 
    DNIe items.
    Press the MENUbutton
    to exit.
    1
    Press the MENUbutton
    to display the menu.
    Press the DOWN
    button to select 
    “Picture”, then press
    the ENTERbutton.
    • DNIe Demo: The screen shows the improved image on the left-hand side and the original 
    image on the right-hand side. 
    • DNIe On: Improved picture mode demonstrated by DNIe Demo is activated.
    • DNIe Off: The mode is deactivated and the screen returns to its original condition.
     venus-04-en  6/3/03 3:08 PM  Page 40 
    						
    							English-41
    OPERATION
    To Enjoy Dolby Digital Sound 
    Dolby Digital is a surround sound technology that reproduces sound using multiple sep-
    arate channels. Often called the 5.1 channel system, it consists of five channels that
    have the 20 – 20,000Hz bandwidth - two front channels (left and right), one central
    channel, and two rear channels (left and right); and the 0.1 channel, or the subwoofer
    channel, that has the 20 – 100Hz (bass effect).   
    Turning the Dolby ProLogic II On 
    2
    Press the DOWN
    button to select 
    “Dolby Digital”, then
    press the ENTER
    button.
    1
    Press the MENUbutton
    to display the menu.
    Press the DOWN
    button to select 
    “Sound”, then press the
    ENTERbutton.
    3
    Press the DOWN
    button to select 
    “Dolby ProLogic II ”,
    then press the
    ENTERbutton. 
    4
    Press the
    UP/DOWN
    buttons to select
    “ON”, then press the 
    ENTERbutton.
    •Turn the Dolby ProLogic II on while the TV is receiving mono or stereo signals to
    enjoy the 5.1-channel Dolby surround sound. 
     venus-04-en  6/3/03 3:08 PM  Page 41 
    						
    							English-42
    OPERATION
    2
    Press the DOWN
    button to select 
    “Dolby Digital”, then
    press the ENTER
    button.
    1
    Press the MENUbutton
    to display the menu.
    Press the DOWN
    button to select 
    “Sound”, then press the
    ENTERbutton.
    3
    Press the DOWN
    button to select 
    “Dynamic Range”, then
    press the ENTER
    button. 
    4
    Press the
    UP/DOWN
    buttons to select
    “ON”, then press the 
    ENTERbutton.
    Turning the Dynamic Range On 
    •Reduces the difference between the high and low volume. Suitable for nighttime
    listening.  
    To Enjoy Dolby Digital Sound…Cont.
     venus-04-en  6/3/03 3:08 PM  Page 42 
    						
    							English-43
    OPERATION
    Adjusts the output level of each speaker connected to optimize the sound quality.
    Once the audio signals reproduced from a CD, DVD or an LDP disc marked “ ” or
    “ ” start to come in from the connected input source, the channel-by-channel sound
    comes through the connected speakers (left and right front speakers, left and right rear
    speakers, and the center speaker).  
    2
    Press the DOWN
    button to select 
    “Dolby Digital”, then
    press the ENTER
    button.
    1
    Press the MENUbutton
    to display the menu.
    Press the DOWN
    button to select 
    “Sound”, then press the
    ENTERbutton.
    3
    Press the DOWN
    button to select 
    “Speaker Setting”, then
    press the ENTER
    button. 
    4
    Press the
    UP/DOWN
    buttons to select
    “Front Left”, then press
    the ENTERbutton.
    Speaker
    • Choose your left and right front speakers among the small and large speakers and select On/Off for the  cen-
    ter, the left and right rear speakers and the subwoofer.  
    • When the Dolby ProLogic II is on: Turn the subwoofer on and choose the small speakers as your left and
    right front speakers to hear the bass sounds. 
    • If the speakers are not connected yet, turn the speaker control off to hear the “Down-Mixed” sound through
    the front speakers.
     venus-04-en  6/3/03 3:08 PM  Page 43 
    						
    All Samsung manuals Comments (0)

    Related Manuals for Samsung LCD TV Ltn406w User Manual