Samsung LCD TV LN26A330J1D Specifications

English - 
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via Component cables
The rear panel jacks on your TV make it easy to connect a DVD Player or Cable Box/Satellite receiver (Set-Top Box) to your TV.
1.		Connect a Component Cable between the COMPONENT IN (1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT [Y, PB, PR]  jacks on the DVD Player or Cable Box/Satellite receiver (Set-Top Box).
2.		Connect Audio Cables between the COMPONENT IN(1 or 2) [R-AUDIO-L] jacks on...

English - 10
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 6~7). Skip step 1 if you have not yet connected to an antenna or a cable s\
ystem. 
1.		Unplug the cable or antenna from the back of the TV.
2.		Connect the cable or antenna to the ANT IN terminal on the back of the VCR.
3.		Connect an RF Cable between   the ANT OUT terminal on the  VCR and the ANT IN terminal on the TV.
4.		Connect a...

English - 11
Connecting an Amplifier/DVD Home Theater
1.		Connect Audio Cables between the AUDIO OUT  [R-AUDIO-L] jacks on the TV and AUDIO IN [R-AUDIO-L] jacks on the Amplifier/DVD Home Theater.
     When an audio amplifier is connected to the "AUDIO OUT [R-AUDIO-L]" jacks: Decrease the volume of the TV and adjust the volume level with the Amplifier’s volume control.
Amplifier/DVD Home Theater
TV Rear Panel
Audio Cable (Not supplied)
Each Amplifier/DVD Home Theater has a different back panel...

English - 12
Connecting a PC
Using the D-Sub Cable
1.		Connect a D-Sub Cable between PC IN [PC] connector on the TV and the PC output connector on your computer. 
2.		Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer.
Using the HDMI/DVI Cable
1.		Connect a HDMI/DVI cable between the HDMI IN 2 jack on the TV and the PC output jack on your computer. 
2.		Connect a 3.5 mm Stereo mini-plug/2RCA Cable between the DVI IN(HDMI2)...

English - 1
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently. 
The Screen Saver is activated if there is no remote control key input for longer than 1 minute while “Plug & Play” is running. 
The Screen Saver is activated if there is no operating signal for longer than 15 minutes.
1.	Press the POWER button on the remote control.      The message “Menu Language, Store Demo, Channels and Time will be set.” is displayed.
   Press the ENTER...

English - 14
6.	Press the ENTER  button.    Press the ▲ or ▼ button to select “Auto”, then Press the ENTER  button.    The message “Set to daylight saving time.” is displayed.
     If you select “Manual”, “Enter the current date and time.” is displayed.  (See page 37)
7.	Press the ▲ or ▼ button to select “Off” or “On”, then press the ENTER  button.    The message “Select the time zone in which you live.” is displayed.
8.	Press the ▲ or ▼ button to highlight the time zone for your local area.      Press...

English - 1
Adjusting the Volume
Using the Volume Buttons
1.	Press the VOL or VOL button to increase or decrease the volume.
Using the MUTE button
At any time, you can cut off the sound using the MUTE button.
1.	Press MUTE button and the sound cuts off.     "" is displayed on the screen.
2.	To turn mute off, press the MUTE button again or simply press the     VOL or VOL button.
Viewing the Display
1.	Press the INFO button on the remote control.
    The TV will display the channel, the type...

English - 16
Memorizing the Channels
Your TV can memorize and store all of the available channels for both "off-air" (Air) and "Cable" channels. After the available channels are memorized, use the CH or CH button to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding or deleting channels (Channel Lists)\
.
Selecting...

English - 17
Storing Channels in Memory (Automatic Method)
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select “Channel”, then press the ENTER  button. 
2.	Press the ▲ or ▼ button to select "Auto Program", then press the ENTER  button.
3.		Press the ▲ or ▼ button to select the antenna connection, then press the  ENTER  button.
    Air: “Air” antenna signal.  Cable: “Cable” antenna signal.  Auto: “Air” and “Cable” antenna signals.
4.		When selecting the Cable TV...

English - 18
To Select the Source
Use to select TV or other external input sources such as DVD players or Cable Box/ Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source  of your choice.
1.	Press the MENU button to display the menu.    Press  the▲ or ▼ button to select “Input”, then press the ENTER  button.
2. Press the ENTER  button to select "Source List".    Press the ▲ or ▼ button to select signal source, then press the ENTER  button.
    Available signal...