Samsung LCD Monitor SyncMaster 320MXN User Manual

 
 
 
 
 
1) Video Wall  
- A Video Wall is a set of video screens that are connected together, so that each screen shows a part of the whole 
picture or so that the same picture is repeated on each screen.
2) Video Wall (Screen divider) 
- The screen can be divided into. 
You can select a number of screens with a different layout when dividing. 
zSelect a mode from Screen divider. zSelect a display from Display Selection. zThe place will be set up by pressing a number in the selected mode.  zThe MDC...

 
 
 
 
 
  - Check the displays to see if any of the other displays connected have the same ID. If more than one displays have 
the same ID, those displays are not properly detected by the program due to data conflict.
- Check if the Display Set ID is a number between 0 and 25. (Adjust using the Display menu)  
Note :A Display Set ID must be a value between 0 and 25 . 
2. The display you wish to control does not appear on the other Control Info Grids 
- Check to see if the display power is ON. (You can...

What is MagicInfo Pro?
|Using MagicInfo Pro|Library|Screen|Schedule
Remote Management|Message|Option|Client / Contents 
Server|Troubleshooting 
 What is MagicInfo Pro? 
 
 
 
MagicInfo Pro uses an Ethernet network for servers and monitors, and transfers media files (image 
files, music files, and movies) and office files (HTML, PDF) from the server to the monitors over the 
network. Multiple monitors are connected to a server via a network and the server can transfer files to 
all the monitors at the...

schedules.  
 
5. Instants message  
→ You can display a message on selected monitors regardless of schedules.  
 
6. MDC and System  
→ The MDC and System functions allow you to control, view the status of, and diagnose monitors.  
 
7. VNC  
→ The VNC function allows you to connect to a monitor remotely and view the status of and control 
and diagnose it.  
 
8. Update and PXE  
→ The Update function allows you to easily update the programs on the monitor. The PXE allows you 
to recover the operating...

What is MagicInfo Pro?|Using MagicInfo Pro
|Library|Screen|Schedule
Remote Management|Message|Option|Client / Contents 
Server|Troubleshooting
 Using MagicInfo Pro 
 
   
  Running MagicInfo Pro  
1. Click Programs -> MagicInfo Pro -> MagicInfo Pro. 
 
2. When MagicInfo Pro runs, select Log In from the File menu. 
 
 
 
3. Enter the user name and password and click OK. 
 
  
  
If you log in for the first time, select Administrator as enter the user name and the password you 
set when installing the...

  
 
 
 
2. Configure the Network Connection settings In the General tab. Enter the server name on the monitor 
identical to the name of the server. To change the server name, double-click the Value field of the 
Server Name item.  
 
 
 
3. If there is more than one network card in the server, select a network card in the Network Device 
item. 
 
4. If both the server and monitor are on the same network, make sure to select ‘Automatic connection 
using a server name’ in the Value field of the Network...

MagicInfo in the OSD pages.) 
 
2. A message is displayed to notify that the monitor is successfully connected to the server.  
   
  File Sub-Menus  
 
 
  
 
   
 
 Registering a Library  
1. Select Library from the File menu to open the Library View. 
 
2. Select a photo file, music file, movie file, document, or Flash file etc. on the server. 
 
3. Right-click on the selected file and select Send To Library from the displayed menu to register it to 
the library. 
 
  

 
 
4. The registered library files are used by the monitor when the Operating Mode of the monitor is set to 
Player or is used when registering a screen.  
  
   
  Registering a Screen 
1. Select Screen from the File menu to open a Screen View. 
 
2. Right-click on the background view. Click on the Area and click either Photo, Movie, Flash, Web, Text, 
or Source from the displayed menu.  
 
 
 
3. When the mouse pointer changes to the crosshair (+) icon, drag it to the Edit View to set the area for...

 
 
5. Repeat steps 2 to 4 to register other areas on a screen. 
 
6. After finishing registering areas, select Save from the File menu to save the screen. 
 
7. Register a schedule to display the saved screen on a monitor(s).  
   
  Registering a Schedule 
1. Select Schedule from the File menu to open the Schedule View. 
 
2. Select the monitors to which the schedule is to be registered in the Tree View at the left. The 
Operating Mode of the selected monitors must be set to Schedule if they can...

 
 
4. If you want to change the date or time of the schedule, drag it to a different date or time.  
 
5. Select Publish from the Tools menu. Select the checkbox next to the monitors for which you want to 
register the selected schedule.  
    
  Sending a Message  
1. Select Message from the File menu to open the Message View. 
 
2. Select the checkbox next to the monitors for which you want to register a message. 
 
3. Configure the settings for the message in the List View at the bottom right. The...