Samsung LCD Monitor SyncMaster 320MXN User Manual

 
 
 
Info Grid shows some basic information necessary to Image Size Control.
1) Click the Video Source tab to adjust Image Size for TV, AV, S-Video, Component, DVI(HDCP), HDMI, DTV.  
Click Select All or use Check Box to select a display to control.
2) Info Grid displays only the display having TV, AV, S-Video, Component or DVI(HDCP) as input source. 
3) Switch Image Size of the selected display randomly.
Note: Auto Wide, Zoom1 and Zoom2 are not available for selection when the input signal type for...

 
 
 
Info Grid shows some basic information necessary to Time Control.
1) Current Time 
- Set the current time for the selected display (PC Time).
- To change the current time, first change the PC Time.
2) On Time Setup 
- Set the Hour, Minute, AM/PM of On Time Setup, Status, Source, Volume of the selected display.
3) Off Time Setup 
- Set the Hour, Minute, and AM/PM, Status for Off Time Setup of the selected display.
4) Shows the On Time settings.
5) Shows the Off Time settings.
The Input source of...

 
 
 
Info Grid shows some basic information necessary to PIP Size Control.
1) PIP Size 
- Shows the current PIP Size of the display in use.
2) OFF 
- Turns off the PIP of the selected display.
3) Large 
- Turns on the PIP of the selected display and changes the size to Large.
4) Small 
- Turns on the PIP of the selected display and changes the size to Small.
5) Double 1 
- Turns on the PIP of the selected display and changes the size to Double 1.
6) Double 2  
- Turns on the PIP of the selected display...

 
 
 
Info Grid shows some basic information necessary to PIP Source Control.
1)  PIP Source  
- PIP Source can be controlled with turning on the LCD Display power. 
2) PC  
- Changes the source of the PIP of the selected display to PC. 
3) BNC  
- Changes the source of the PIP of the selected display to BNC. 
4) DVI  
- Changes the source of the PIP of the selected display to DVI. 
5) AV  
- Changes the source of the PIP of the selected display to AV. 
6) S-Video  
- Changes the source of the PIP of the...

 
 
 
Info Grid shows some basic information necessary to Settings Control.  
When each function is selected, the set value of the selected function is displayed in the slide.When selected, each 
function fetches the value for the set and displays it on the slide bar. When Select All is chosen, the default value 
is displayed. Changing a value in this screen will automatically change the mode to CUSTOM. 
1) Picture 
- Available only for TV, AV, S-Video, Component, HDMI, DTV.
2) Contrast 
- Adjusts...

 
 
 1. Click Settings of the main icons and the Settings Control screen appears.
Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value 
of the selected function is displayed in the slide. When selected, each function fetches the value for the set and 
displays it on the slide bar. When Select All is chosen, the default value is displayed. Changing a value in this 
screen will automatically change the mode to CUSTOM. 
1) Picture PC 
-...

 
 
 
Audio 
1. Click Settings of the main icons and the Settings Control screen appears.
Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value 
of the selected function is displayed in the slide. When selected, each function fetches the value for the set and 
displays it on the slide bar. When Select All is chosen, the default value is displayed. Changing a value in this 
screen will automatically change the mode to CUSTOM.
1) Audio 
-...

 
Info Grid shows some basic information necessary to Settings Control. 
1) Image Lock  
- Available only for PC, BNC.
2) Coarse 
- Adjusts Coarse of the selected display.
3) Fine 
- Adjusts Fine of the selected display.
4) Position 
- Adjusts Position of the selected display.
5) Auto Adjustment 
- Self-Adjust to the incoming PC signal.
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
Settings Control is available only for the displays for...

 
 
An Info Grid showing several basic data items appears. 
1) Maintenance 
- Allows the Maintenance Control function for all input sources. 
2) Auto Lamp Control 
- Automatically adjusts the backlight of the selected display at a specified time.  
The Manual Lamp Control automatically turns off if you adjust using the Auto Lamp Control. 
3) Manual Lamp Control 
- Allows you to adjust the backlight of the selected display regardless of the time.  
The Auto Lamp Control automatically turns off if you...

 
 
 
1) Safety Screen 
- Eliminates the afterimages that can result when the selected display stays in Pause mode for an extended period of 
time. You can set the repeat cycle timer by selecting the Interval by hour and Second by second. 
It can be set to Scroll, Pixel, Bar and Eraser by Screen Type.
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
Setting Second, you can set to 1, 2, 3, 4, 5 for Scroll Type and to 10, 20, 30, 40, 50 for...