Samsung LCD Monitor SyncMaster 320MXN User Manual

What is MagicInfo Pro? |Using MagicInfo Pro|Library|Screen|Schedule
Remote Management|Message|Option
|Client / Contents 
Server|Troubleshooting
 Option 
 
   
 Option 
 
 
 
   
 General 
 
 Network Connection: Selects the connection method between the server and the monitor. The 
server and monitor can be connected to each other only if the same connection method is used. 
zAutomatic connection: The monitor automatically connects a server on the same 
network.   

 
   
zDirect connection: The monitor directly connects to the server with the specified IP 
address.  
If the server and monitor are on a different private network, they cannot connect to each 
other. However, if the server has a public IP address, a monitor with a private IP address 
can be connected to it using the direct connection method.
  
Server Name: Changes the server name. 
The server and monitor can connect to each other only if their server names are the same.
  
Network Device: Selects the...

    
zUse the available disk space of each monitor: Sets the size to the maximum free disk 
space of the monitor.  
zUse the equal disk space of each monitor: Sets the size to the value entered in the edit 
box.  
zDo not check disk space when schedule is published: Publishing continues even though 
the total size of the schedules to be published is larger than that of the free disk space of 
the monitor. 
  
Publishing sequence: Specifies the order when publishing is performed for multiple monitors....

What is MagicInfo Pro?|Using MagicInfo Pro|Library|Screen|Schedule
Remote Management|Message|Option|Client / Contents Server
|Troubleshooting
 Contents Server
 
   
  A program run on the additional PC where the content server is operating. 
 
  
  Version: The version of the content Server.
  
MAC ID: The MAC address of the network device on the PC where the content server is 
installed. Used when the MagicInfo Pro Server checks whether it is registered as the content 
server.
  
Name: The name of the...

  
 
     
EWF 
Displays or changes the drive settings.
    
Password 
Manages the password.
    
Setup 
 
    
Rotation
Rotates the screen with the selected option.
    
Program
Runs or exits the program.
    
ExitExits mnMain. If you exit mnMain, MagicInfo Pro and the Schedule program are also exited 
together.  
 
 
 
EWF: Displays and changes the Drive settings
     
  
  
EWF State
 
zCurrent state: Displays the current EWF state.  zBoot command: Displays the EWF state which will be applied at the...

  
Old password 
 
zEnter the existing password.  
New password 
 
zEnter the new password.  
Change
 
zChange the password.  
Use password lock
 
zVerifies your password before you enter the Setup screen.
     
 
     
Setup 
     
 
Connection Tab 
     
  
  
Schedule server
 
zServer Connection Settings {The client automatically connects to the server.  {When a connection is disconnected, the client connects to another server 
automatically.  
{The client connects to the server manually. (Enter the...

 
{The ID of the server to connect to  {Client ID  
     
 
     
     
  1 Schedule server 
     
   
zAutomatic connection using server name  
: If the schedule server and client are on the same sub network, the client connects to the 
servers using their name.  
zReconnecting another server when disconnected  
: If a connection is disconnected, the client connects to another server on the same sub 
network automatically.  
zDirect connection using IP address  
: The client connects to the schedule...

   
zSelect the program performed when the client starts.
Automatic updates  
 
zSelect how to perform automatic updates.  
     
 
     
     
  1Startup
     
   
zSets the program to be performed when the client starts.  zYou can select one of two programs, or select neither of them.  zPlayer: Runs a media player program that can be run using the remote control and can 
receive and play the content that exists on the server. (MagicInfo Pro)  
zRuns the program that displays the information. This...

   {Background: Sets the background for the entire screen.  {File: Sets the logo screen to be displayed on the background. (A flash, photo, or movie 
file can be set.)  
     
  2 Schedule folder
     
   
zSets the directory which the content to be scheduled is downloaded to and managed in and 
manages the size of the disk. 
{Target: Sets the target directory.  
(You should set a directory on the D: drive or a removable disk, as the C: drive is used 
for the system.)  
{Space: Sets the disk size limit...

What is MagicInfo Pro?|Using MagicInfo Pro|Library|Screen|Schedule
Remote Management|Message|Option|Client / Contents 
Server|Troubleshooting 
 Troubleshooting  
  When a monitor is not connected to the server 
   
zCheck whether the network environment for the server and monitor is normal.. 
(Check the network cable connections and IP address settings, etc)  
zCheck whether a correct network card has been selected when there is more than 
one network card in the PC where the server is operating. 
(Use...