Samsung LCD Monitor SyncMaster 320MXN User Manual

							What is MagicInfo Pro? |Using MagicInfo Pro|Library|Screen|Schedule
Remote Management|Message|Option
|Client / Contents 
Server|Troubleshooting
 Option 
 
   
 Option 
 
 
 
   
 General 
 
 Network Connection: Selects the connection method between the server and the monitor. The 
server and monitor can be connected to each other only if the same connection method is used. 
zAutomatic connection: The monitor automatically connects a server on the same 
network.   
						

							 
   
zDirect connection: The monitor directly connects to the server with the specified IP 
address.  
If the server and monitor are on a different private network, they cannot connect to each 
other. However, if the server has a public IP address, a monitor with a private IP address 
can be connected to it using the direct connection method.
  
Server Name: Changes the server name. 
The server and monitor can connect to each other only if their server names are the same.
  
Network Device: Selects the LAN card used in the server. 
If there are more than one available LAN cards on the PC, a window that allows you to 
select a LAN card to use when the server starts for the first time.
  
Maximum number of undos: Selects the maximum number of previous operations you can 
cancel.
  
Refresh Time: Sets the frequency of the server receiving monitor data for updating in Remote 
Management. When set to 0, the server does not update the monitor data automatically and 
you have to click Refresh in the tool bar or from the menu to update the monitor data.
  
Show hidden files and folders: Shows files with the hidden attribute on the server computer in 
the library.
  
Maximum number of local monitors: Sets the maximum number of virtual local monitors that 
can be created for publishing the schedule locally. 
  
Maximum number of network groups: Sets the maximum number of network groups that can 
be created to manage the networked monitors.
  
Maximum number of Alarm Infos: Specify the number of warning messages that can be stored 
which notify the user of client errors. If more than the specifed number of errors occurs, older 
messages are deleted.
  
Content Synchronization Period: Sets the time interval for synchronization of the content 
server.
  
Content Synchronization Time: Sets a time to synchronize the content server. However, 
synchronization is performed at the time set on the client. 
  
Content Synchronization Sequence: Sets the order in which the content is synchronized. 
   
  Schedule 
 
  Folder of local schedule: Sets the directory in which local schedules are created using a virtual 
local monitor. The default value is the folder where the server is installed.
  
Set the manageable period of past schedules: Sets the period for schedules for which you can 
register, save and import screens. When set to 0, you cannot register, save or import the 
screens before the present time.
  
Set the default period of the publishing schedule: Sets the default publishing period for a 
schedule.
 
Maximum publishing size: Sets the option regarding the free space on the monitor for 
publishing a schedule.   
						

							    
zUse the available disk space of each monitor: Sets the size to the maximum free disk 
space of the monitor.  
zUse the equal disk space of each monitor: Sets the size to the value entered in the edit 
box.  
zDo not check disk space when schedule is published: Publishing continues even though 
the total size of the schedules to be published is larger than that of the free disk space of 
the monitor. 
  
Publishing sequence: Specifies the order when publishing is performed for multiple monitors. 
zPublish schedules at the same time: Publishes the schedules to multiple monitors at the 
same time.  
zPublish schedules one after the other: Publishes the schedules to multiple monitors one 
by one. 
   
  Screen 
 
  
  
Default Resolution: Adds, deletes and sets the default resolution for a newly created screen. 
zNew: Adds a new resolution that can be used in a screen. It is added to the list of 
background resolutions for the screen.  
zDelete: Deletes a created resolution. It is removed from the list of background 
resolutions for the screen.  
zSet: Sets the selected resolution as the default resolution. 
  
Display options for error messages: Sets the options for errors that may occur when a screen is 
previewed. 
zDo not display error messages: When an error occurs, the next preview operation 
continues without an error message being displayed.  
zDisplay error messages during a fixed time: When an error occurs, an error message is 
displayed for a specified period of time and then is automatically hidden after that 
period.   
  
						

							What is MagicInfo Pro?|Using MagicInfo Pro|Library|Screen|Schedule
Remote Management|Message|Option|Client / Contents Server
|Troubleshooting
 Contents Server
 
   
  A program run on the additional PC where the content server is operating. 
 
  
  Version: The version of the content Server.
  
MAC ID: The MAC address of the network device on the PC where the content server is 
installed. Used when the MagicInfo Pro Server checks whether it is registered as the content 
server.
  
Name: The name of the content server configured by the MagicInfo Pro Server.
  Connection
  
Server IP: Enter the IP address of the MagicInfo Pro Server you want to connect to. Click the 
Connect button. The client tries to connect to the MagicInfo Pro Server at the specified Server 
IP address. If the MagicInfo Pro Server accepts the connection, the client is successfully 
connected to the server.
  
Status: Displays the connection status for the MagicInfo Pro Server. 
  
Network: Displays the network usage. 
   
 Client Functions
 
  
 MagicInfo Pro Client Configurations  
 
  
 
 
 
About Displays the version.  
						

							  
 
     
EWF 
Displays or changes the drive settings.
    
Password 
Manages the password.
    
Setup 
 
    
Rotation
Rotates the screen with the selected option.
    
Program
Runs or exits the program.
    
ExitExits mnMain. If you exit mnMain, MagicInfo Pro and the Schedule program are also exited 
together.  
 
 
 
EWF: Displays and changes the Drive settings
     
  
  
EWF State
 
zCurrent state: Displays the current EWF state.  zBoot command: Displays the EWF state which will be applied at the next boot-up. 
EWF command   
 
zDisable and restart : Disables and restarts the EWF.  
The EWF state is actually disabled at the next boot-up.  
zEnable and restart : Enables and restarts the EWF. 
The EWF state is actually enabled at the next boot-up.  
zCommit : Saves the changes in the Enable state.  
     
 
     
Password : Manages passwords for existing MagicInfo Pro. 
  Verifies the password before you enter the Setup screen. If the Use Password lock checkbox is 
checked, you need to verify your password again when entering the MagicInfo Pro setup menu.
     
   
						

							  
Old password 
 
zEnter the existing password.  
New password 
 
zEnter the new password.  
Change
 
zChange the password.  
Use password lock
 
zVerifies your password before you enter the Setup screen.
     
 
     
Setup 
     
 
Connection Tab 
     
  
  
Schedule server
 
zServer Connection Settings {The client automatically connects to the server.  {When a connection is disconnected, the client connects to another server 
automatically.  
{The client connects to the server manually. (Enter the IP address of the server).  
Content server  
 
zUp to two (2) content servers can be configured.  zEnter the IP address of the server.  
Name
 
zSetting Name  
						

							 
{The ID of the server to connect to  {Client ID  
     
 
     
     
  1 Schedule server 
     
   
zAutomatic connection using server name  
: If the schedule server and client are on the same sub network, the client connects to the 
servers using their name.  
zReconnecting another server when disconnected  
: If a connection is disconnected, the client connects to another server on the same sub 
network automatically.  
zDirect connection using IP address  
: The client connects to the schedule server with the entered IP address. 
: The client can connect to the schedule server even though they are not on the same 
network. However, if the server has a private IP address on a private network, the client 
cannot connect to it. Therefore, the schedule server must be installed with a public IP 
address on a network.  
     
  2Content server 
     
   
zConnect content servers  
: Select this option when you want to use separate schedule and content servers. 
: If you select this option, all the content files are downloaded or streamed from the specified 
content server and the schedule server performs only the schedules and the remote control 
function.  
zPreferred IP  
: Enter the IP address of the computer that operates as the primary content server.  
zArternate IP  
: Enter the IP address of the computer that operates when the primary content server cannot 
be connected to.  
     
  3Name
     
   
zServer  
: Enter the name of the schedule server that the client connects to.  
zClient 
: Set the name of the monitor to connect to the schedule server.  
     
     
     
     
 
Program Tab 
     
  
Startup  
						

							   
zSelect the program performed when the client starts.
Automatic updates  
 
zSelect how to perform automatic updates.  
     
 
     
     
  1Startup
     
   
zSets the program to be performed when the client starts.  zYou can select one of two programs, or select neither of them.  zPlayer: Runs a media player program that can be run using the remote control and can 
receive and play the content that exists on the server. (MagicInfo Pro)  
zRuns the program that displays the information. This program displays a screen that is 
created on the server at the specified time and can be controlled remotely.  
     
  2 Automatic update
     
   
zSets the option for updating the client program automatically.  zDo not update automatically: Updating is not performed automatically.  zCheck and update at fixed time: Checks the update version at the specified time every day 
and updates the client if necessary.  
zCheck and update whenever the program starts: Checks the update version whenever the 
program starts and updates the client if necessary.  
     
     
     
 
Screen Tab 
     
  
  
Logo screen : the main screen of the Signage Scheduler program. 
 
zBackground: Sets the background color.  zFile: Sets the logo screen. (A flash, photo, and movie file can be set.)  
Schedule folder : Sets the location of the schedule file. 
 
zTarget: Sets the location of the screen design file and content file.  zSpace: Sets the size limit for the files to be downloaded.  
Local Schedule : Sets the local schedule options.
 
zCopy and play from a removable disk: Copies the schedule file from a USB device to the 
FDM and then runs it.  
zPlay directly from a removable disk: Runs the schedule file directly from the USB device.  
     
 
     
     
  1 Logo screen
     
zSets the initial screen of the scheduler or the screen to be displayed between schedules.  
						

							   {Background: Sets the background for the entire screen.  {File: Sets the logo screen to be displayed on the background. (A flash, photo, or movie 
file can be set.)  
     
  2 Schedule folder
     
   
zSets the directory which the content to be scheduled is downloaded to and managed in and 
manages the size of the disk. 
{Target: Sets the target directory.  
(You should set a directory on the D: drive or a removable disk, as the C: drive is used 
for the system.)  
{Space: Sets the disk size limit used for the schedule.Between 10% to 90% of the 
available free space can be set.  
     
  3Local schedule
     
   
zSets the options required when you perform a schedule using a USB device instead of the 
network. 
{Copy and Play from a removable disk 
: Copies the schedule that exists on a USB device to the schedule folder and then 
plays the copied schedule. You can remove the USB device after copying it.  
{Play directly from a removable disk 
: Plays the schedule that exists on a USB device directly. If you remove the USB 
device, the schedule exits.  
     
   
   
 
Options Tab 
     
  
  
Other Options
 
zShow loading screen before program start: Displays a loading screen from the time after 
your computer is booted to the time before the main program starts.  
zDo not show system message: Do not show the system messages generated by Windows.  
     
 
     
  
						

							What is MagicInfo Pro?|Using MagicInfo Pro|Library|Screen|Schedule
Remote Management|Message|Option|Client / Contents 
Server|Troubleshooting 
 Troubleshooting  
  When a monitor is not connected to the server 
   
zCheck whether the network environment for the server and monitor is normal.. 
(Check the network cable connections and IP address settings, etc)  
zCheck whether a correct network card has been selected when there is more than 
one network card in the PC where the server is operating. 
(Use the Network Device item in the Server Option window.)  
zCheck whether the server names used by the server and monitor are the same.  zCheck whether the connection methods used by the server and monitor are the 
same. 
(Automatic connection using a server name / Direct connection using an IP 
address)  
zIf the connection method is set to Automatic connection using a server name, 
check whether the server and monitor are on the same subnet.  
zIf the connection method is set to Direct connection using an IP address, check 
whether the IP address of the server set in the monitor is correct. If the server 
and monitor are on different networks, the IP address of the server must be a 
public IP address.  
zCheck whether the PC prevents the server from accessing the monitor because of 
the Windows Firewall.     
  When the icon next to the monitor name is amber, and not blue which means connected 
normally 
   
This occurs when the network connection is normal but the connection between the 
server and the monitor is abnormal. This may also occur when the monitor is connected 
to a different server or the network state is abnormal. Check the monitor connections 
and the network state.    
  When publishing is not performed successfully 
   
zCheck whether the checkbox next to the monitor to which you want to publish to 
is selected..  
zCheck whether the monitor to which you want to publish to is connected to the 
server.  
zCheck whether the Operating Mode of the monitor to which you want to publish to 
is set to Scheduler.  
zCheck whether the monitor has sufficient free disk space.  zCheck whether the screen exists within the publishing time.     
  When publishing is completed even though 100% is not displayed in the Publishing 
Status. 
   
zThe percentage displayed in the Publishing Status is the ratio of the size of the 
content the monitor has actually downloaded to the total size of all the content 
which is set to be downloaded on the screen. If 100% is not displayed, it means 
that the monitor has failed to download the content files. To view the results, 
double-click the Result cell of the monitor or use the buttons displayed when 
clicking it. Check whether the file the monitor failed to download actually exists on 
the server or content server and is correct.  
zCheck whether StreamServer.exe, which is performed at the same time when the 
server starts up, is running normally. (Check whether StreamServer.exe is 
running by viewing its tray icon or looking for its image name in the Processes tab 
of the Task Manager.) If it is not running, run the server again, or run 
StreamServer.exe again in the folder with the servers executable files.    
  When a schedule is not performed normally 
  
 
zCheck whether the schedule has been published successfully.  zCheck whether the system times of the server and monitor are the same.  
  
  Password / Log In 
  
 
The password you enter when installing MagicInfo Pro becomes the password of the 
Administrator account by default.  
  
  
 
If you forgot your password, remove and reinstall the program.