Samsung Ht X30 Instruction Manual

							GBCONNECTIONS
21
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).1
Connect the Digital Input (OPTICAL) on the Home Theater to the Digital Output of the external digital com-
ponent.
2
Press the AUX button on the remote control to select .■You can also use the FUNCTIONbutton on the main unit.
The mode switches as follows : DVD/CD➝DIGITAL IN➝AUX 1➝AUX 2➝USB➝FM. 
OPTICAL : Rear Panel
Optical Cable(not supplied)
20
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
AUX1 : Connecting an External Analog Component
Analog signal components such as an MP3 Player.1
Connect AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component.■Be sure to match connector colors.
2
Press the AUXbutton on the remote control to select  input.■You can also use the FUNCTIONbutton on the main unit.
The mode switches as follows : DVD/CD➝DIGITAL IN➝AUX 1➝AUX 2➝USB➝FM. 
1
Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the external analog component.
2
Press the AUXbutton on the remote control to select  input.■You can also use the FUNCTIONbutton on the main unit.
The mode switches as follows : DVD/CD➝DIGITAL IN➝AUX 1➝AUX 2➝USB➝FM. Connecting Audio from External Components
Audio Cable(not supplied)
If the external analog compo-
nent has only one Audio Out,
connect either left or right.
• You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR 
to this product.
AUX1 : Front Panel AUX2 : Rear Panel
Audio Cable(not supplied)
 X30_TX35(1~39P) GB  2007.3.8  1:00 PM  Page 20
 
						

							GB
23
Before Reading the Users ManualIcons that will be used in manual
Make sure to check the following terms before reading the user manual.
Icon Term Definition
DVD
CD
MP3
JPEG
DivX
CAUTION
NOTE
DVD
CDCDMP3JPEGDivX
This involves a function available with DVD or 
DVD-R/DVD-RW discs that have been recorded and
finalized in Video Mode.
This involves a function available with a data CD
(CD-R or CD-RW).
This involves a function available with CD-R/-RW discs.
This involves a function available with CD-R/-RW discs.
This involves a function available with MPEG4 discs.
(DVD R/RW
,
CD-R or CD-RW)
This involves a case where a function does not 
operate or settings may be cancelled.
This involves tips or instructions on the page that help
each function operate.
• In this manual, the instructions marked with DVD (          ) are applicable to DVD-VIDEO, DVD-AUDIO
and DVD-R/-RW discs that have been recorded in Video Mode and then finalized.
Where a particular DVD type is mentioned, it is indicated separately.
• If a DVD-R/-RW disc has not been recorded properly in DVD Video format, it will not be playable.
DVD
OPERATION
22
Connecting the FM Antenna
FM Antenna  (supplied)
1
Connect the FM antenna supplied to the FM 75ΩCOAXIAL Jack.
2
Slowly move the antenna wire around until you find a location where reception is good, then fasten it 
to a wall or other rigid surface.
• This unit does not receive AM broadcasts.
Please observe the following cautions for your safety.■Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit
may rise and may damage it.■Do not obstruct the cooling fan or ventilation holes. If the cooling fan or ventilation holes are covered
with a newspaper or cloth, heat may build up inside the unit and fire may result.
The cooling fan supplies cool air to the unit to  prevent overheating.Cooling Fan
 X30_TX35(1~39P) GB  2007.3.8  1:00 PM  Page 22
 
						

							GB
25
OPERATION
Disc Playback
1
Press the OPEN/CLOSEbutton to open the disc tray.
2
Load a disc.■Place a disc gently into the tray with the disc’s label facing up.
3
Close the compartment by pressing the OPEN/CLOSEbutton again.■Playback starts automatically.
• Depending on the content of the disc, the initial screen may appear different.
• Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : a copy protection system) rec-
ommendations.
To stop playback, press the STOPbutton during playback.■If pressed once,  is displayed and the stop position will be stored in memory. 
If thePLAY/PAUSE ( )button or ENTERbutton is pressed, playback resumes from the stop position.
(This function works only with DVDs.)■If pressed twice,  is displayed, and if the PLAY/PAUSE ( )button is pressed, playback starts from 
the beginning.To temporarily pause playback, press the PLAY/PAUSE
()
button during playback.
■To resume playback, press the PLAY/PAUSE ( )button again.
DVD
CD
24
Before Using Your Home TheaterTo Operate your Samsung TV and the Home Theater with the HT-X30/HT-TX35s Remote Control
1
Plug the main units power cord into the AC power supply. ■Before plugging your system into a main socket, you must check the voltage setting.
If the voltage of the socket does not correspond to the setting on the rear of the unit, you
may seriously damage your system.
2
Press the TVbutton to set the remote to TV mode.
3
Press the POWERbutton to turn on your Samsung TV 
with this remote.
4
Press theTV/VIDEObutton to select VIDEO mode on your TV.
5
Press the DVD RECEIVERbutton to switch to DVD RECEIVER mode to
operate the DVD Home Theater
6
Press the FUNCTIONbutton on the main unit or DVDbutton 
on the remote to enable DVD/CD playback.
Press and hold the NT/PALbutton on the remote controller for over 5 seconds
while the power is turned off. By default, the video format is set to .
 or  will appear in the display. At this time, press the NT/PALbutton shortly to
select between  and . 
Each country has a different video format standard. For normal playback, the video format of the disc must be the same as the video format of your TV. 
Selecting the Video Format
VIDEO
The DVD Home Theaters remote can be used to control Samsung TVs.
 X30_TX35(1~39P) GB  2007.3.8  1:00 PM  Page 24
 
						

							GBOPERATION
27
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played
back with this Home Theater.
JPEG File Playback
• The maximum resolutions supported by this product are 5120 x 3480 (or 19.0 MPixel) for
standard JPEG files and 2048 x 1536 (or 3.0 MPixel) for progressive image files. 
• If a JPEG file is played when the HDMI output resolution is 720p/1080i, the mode is automat-
ically converted to 576p (480p) mode.
1
Place the JPEG disc on the disc tray.■Playback starts automatically. Each image is displayed for 5 seconds and then the next
image is displayed.
2
Press theSLIDE MODEbutton.■Each time the button is pressed, the image makes the transition as follows :SLIDE SHOW MODE : 1~5 
➝ SLIDE SHOW MODE : RANDOM 
➝
SLIDE SHOW MODE : NONEPress the  button to skip to the next slide.
Each time the button is pressed, the slide moves backward or forward.
Slide Mode
1
Press the DIGESTbutton during playback.■JPEG files will be shown in 9 windows.
2
Press the Cursor , , , button to select the desired image and
then press the ENTERbutton.■The selected image is played for 5 seconds before moving to the next image.To view the previous or next 9 images, press the  button.
Digest Function
You can view 9 JPEG images on the TV screen at once.
Press the Cursor , , , button during playback.
Rotate/Flip Function
button: Flip Vertically
button: Flip Horizontally
button: Rotate 90°
Counterclockwise
button: Rotate 90°
Clockwise
Original Image
JPEG
26
MP3/WMA-CD Playback
1
Place the MP3/WMA disc on the disc tray.■The MP3/WMA menu screen will appear and playback will start.■The appearance of the menu depends on the MP3/WMA disc.■WMA-DRM files cannot be played.
2
In Stop mode, use the Cursor , , , button to select the album, 
and then press the ENTERbutton.■Use the Cursor
,
button to select the track.
3
To change the album, use the Cursor , , , button to select another
album in Stop mode, and then press theENTERbutton.■To select another album and track, repeat Steps 2 and 3 above.  
4
Press theSTOP ( )button to stop playback.
To play a file icon in the screen,■Press the Cursor
,,,
button when it is in Stop mode and select a desired icon from the top part of the menu.
Data CDs (CD-R, CD-RW) encoded in MP3/WMA format can be played.
Music File Icon : 
To play music files only, select the  Icon.
Image File Icon : 
To view image files only, select the  Icon.
Movie File Icon : 
To view movie files only, select the  Icon.
All File Icon : 
To view movie files only, select the  Icon.
• Depending on the recording mode, some MP3/WMA-CDs may not play.
• Table of contents of a MP3-CD varies depending on the MP3/WMA track format
recorded on the disc.
MP3
 X30_TX35(1~39P) GB  2007.3.8  1:00 PM  Page 26
 
						

							GBOPERATION
29
If the disc has more than one subtitle file, the default subtitle may not match 
the movie and you will have to select your subtitle language as follows:1
In Stop mode, press the Cursor , button, select the desired subtitle ( )
from the TV screen, and then press the ENTERbutton.
2
When you select the desired DivX file from the TV screen, the movie will be
played normally.If the Disc has more than One Subtitle File
DivX is a video file format developed by Microsoft and is based on MPEG4 compression technology to provide audio and
video data over the Internet in real-time. 
MPEG4 is used for video encoding and MP3 for audio encoding so that the users can watch a movie at near DVD-quality
video and audio.DivX(Digital internet video eXpress)1. Supported Formats
This product only supports the following media formats.If both video and audio formats are not supported, the user may
experience problems such as broken images or no sound.
2. Caption Function
• You must have some experience with video extraction and editing in order to use this feature properly.• To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX media file (*.avi)
within the same folder. 
Example.   Root Samsung_007CD1.avi
Samsung_007CD1.smi • Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and Chinese) for the
file name. 
Format MP3 WMA AC3 DTS
Bit Rate 80~384kbps 56~128kbps 128~384kbps 1.5Mbps
Sampling Frequency
44.1khz 44.1/48khz 44.1khz
• DivX files, including audio and video files, created in the DTS format can only support up to 6Mbps.• Aspect Ratio : Although the default DivX resolution is 640x480 pixels (4:3), this product supports up to 800x600 pixels
(16:9). TV screen resolutions higher than 800 will not be supported.• When you play a disc whose sampling frequency is higher than 48khz or 320kbps, you may experience shaking on 
the screen during playback. Supported Audio Formats
Press theSUBTITLEbutton.■Each time you press the button, your selection will toggle between 
and .■If the disc has only one subtitle file, it will be played automatically.■See number 2 (Caption Function) below for more details concerning Subtitle usage with DivX
discs.Subtitle Display
Format AVI WMV
Supported Versions DivX3.11~DivX5.1, XviD V1/V2/V3/V7
Supported Video Formats
28
The functions on this page apply to DivX disc playback.
DivX Playback
During playback, press the  , button.■Goes to the next file whenever you press the  button, if there are over 2 files in the disc. ■Goes to the previous file whenever you press the  button, if there are over 2 files in the disc. Skip Forward/Back
During playback, press the Cursor , button.■Playback skips 5 minutes forward whenever you press the Cursor button.■Playback skips 5 minutes back whenever you press the Cursor button.5 Minute Skip function
To play back the disc at a faster speed, press the  or  button during
playback.■Each time you press either button, the playback speed will change as follows: 
2x ➝4x ➝8x ➝32x ➝Normal.Fast Playback
1
Press the ZOOMbutton.■Each time you press the button, your selection will toggle between  and
.
2
Press the Cursor , , , button to move to the area you want to enlarge.Zoom Function• A DivX file can be zoomed only in ZOOM X2 mode. 
• DivX files have .Avi file extensions, however, not all .Avi files are DivX and may not be
playable in this unit.
DivX
Press the AUDIO button.■If there are multiple audio tracks on a disc, you can toggle between them.■Each time you press the button, your selection will toggle between  and         .Audio Display•  is displayed when there is one supported language in the disc.
 X30_TX35(1~39P) GB  2007.3.8  1:00 PM  Page 28
 
						

							GBOPERATION
31
Press the REMAINbutton.■For checking the total and remaining time of a title or chapter being played.
Each time the Remain button is pressed 
Checking the Remaining Time
Press the  , button.■Each time the button is pressed during playback, the playback speed changes as follows:
Fast Playback
2X ➝4X ➝8X ➝32X ➝PLAY
2X ➝4X ➝8X ➝32X ➝PLAY
Press the SLOWbutton.■Each time the button is pressed during playback, the playback speed changes as follows:
Slow Playback
• No sound is heard during slow playback.
• Reverse slow playback does not work with DivX.• During fast playback of a CD or MP3-CD, sound is heard only at 2x speed, and not at 4x,
8x, and 32x speeds.
1/2 ➝1/4 ➝1/8 ➝1/2 ➝1/4  ➝1/8 ➝PLAY1/2 ➝1/4 ➝1/8 ➝PLAY
DVD
CD
MP3
DVD
CD
MP3
DivX
DVD
DivX
DVDDivXDVD-VIDEODVD-AUDIOCDMP3
TITLE ELAPSED ➝TITLE REMAIN ➝CHAPTER ELAPSED ➝CHAPTER REMAIN
TRACK ELAPSED ➝TRACK REMAIN ➝TOTALELAPSED ➝TOTAL REMAIN
TRACK REMAIN ➝TRACK ELAPSEDGROUP ELAPSED ➝GROUP REMAIN ➝TRACK ELAPSED ➝TRACK REMAIN
30
Using the Playback Function
Press the INFObutton.■Each time the button is pressed, the display changes as follows:
The information
Display disappears
from the screen
The information
Display disappears
from the screenThe information
Display disappears
from the screen
Screen Display
CD display DVD display
TITLE display
ELAPSED TIME displaySUBTITLE display
TRACK (FILE) display
AUDIO LANGUAGE displayREPEAT PLAYBACK display
ANGLE displayDOLBY DIGITAL displaySTEREO (L/R) display
CHAPTER display
Displaying Disc Information
You can view disc playback information  on the TV screen.
DVD
CD
MP3
JPEG
DivX
DVDCDMP3
JPEG
DivX
• Depending on the disc, the disc information display may appear different.
• Depending on the disc, you can also select DTS, DOLBY DIGITAL, or PRO LOGIC.
appears on the TV screen! 
If this symbol appears on the TV screen when pressing a button, that operation is not possible with
the disc currently being played.
DVD-AUDIO display
DVD
AUDIO
GROUP display
 X30_TX35(1~39P) GB  2007.3.8  1:00 PM  Page 30
 
						

							GBOPERATION
33
CHAPTER: Repeatedly plays the selected chapter.
TITLE: Repeatedly plays the selected title.
GROUP: Repeatedly plays the selected group.
RANDOM: Plays tracks in random order.
(A track that has already been played may be played again.)
TRACK: Repeatedly plays the selected track.
DIR: Repeatedly plays all tracks in the selected folder.
DISC: Repeatedly plays the entire disc.
OFF: Cancels Repeat Playback.
Repeat Playback Options
Press the REPEATbutton.Each time the button is pressed during playback, the repeat playback mode
changes as follows:1
Press the INFObutton twice.
2
Press the Cursor button to move to REPEAT PLAYBACK ( ) display.
3
Press the Cursor  button to select the desired Repeat Playback mode.To select another album and track, repeat Steps 2 and 3 above.  
4
Press the ENTERbutton. 
• For DivX, MP3 and JPEG discs, you cannot select Repeat Play from the information dis-
play screen.
To Select a Repeat Playback Mode in the Disc Information Screen
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
Repeat Playback
DVD
CD
MP3
JPEG
DivX
DVD
CD
DVD
CD
DVD-VIDEODVD-AUDIOCDMP3
JPEG
DivX
REPEAT : CHAPTER ➝REPEAT : TITLE ➝REPEAT : OFF
REPEAT : TRACK ➝REPEAT : GROUP➝REPEAT : OFFREPEAT : TRACK ➝REPEAT : DISC ➝REPEAT : OFFREPEAT : RANDOM ➝REPEAT : TRACK ➝REPEAT : DIR ➝
REPEAT : DISC ➝REPEAT : OFF
32
Using the Playback Function
(Con’t)
Press the  , button.■Each time the button is pressed during playback, the previous or next chapter, track or 
directory (file) will be played.■You cannot skip chapters consecutively.
Skipping Scenes/Songs
TITLE 01/05 CHAPTER 002/045
TITLE 01/05 CHAPTER 004/045
DVD
CD
MP3
DVDMP3
 X30_TX35(1~39P) GB  2007.3.8  1:00 PM  Page 32
 
						

							GBOPERATION
35
1
Press theINFObutton.
2
Press the Cursor button to move to ANGLE ( ) display.
3
Press the Cursor , button or numeric buttons to select the desired angle.■Each time the button is pressed, the angle changes as follows:
This function allows you to view the same scene in different angles.
Angle Function
2/33/31/3
• The Angle function works only with discs on which multiple angles have been recorded.
1
Press the ZOOMbutton.
2
Press the Cursor , , , button to move to the area you want to enlarge.
3
Press the ENTERbutton.■Each time the button is pressed, the zoom level changes as follows:ZOOM X 1.5 ➝ZOOM X 2 ➝ZOOM X 3 ➝ZOOM OFF
This function allows you to enlarge a particular area of the displayed image.
Zoom (Screen Enlarge) Function
• When a DivX disc is being played, the screen is enlarged up to twice the normal size.
DVD
DVD
DivX
SELECT ZOOM POSITION
34
Using the Playback Function
(Con’t)
A-B Repeat Playback
• The A-B Repeat function does not operate with DivX, MP3 or JPEG discs.• No sound is heard during step motion playback.
1
Press theINFObutton twice.
2
Press the Cursor button to move to REPEAT PLAYBACK ( ) display.
3
Press the Cursor , button to select  and then press theENTERbutton 
at the beginning of the desired segment.■When the ENTERbutton is pressed, the selected position will be stored in memory.
4
Press theENTERbutton at the end of the desired segment.■The specified segment will be played repeatedly.To return to normal playback, press the Cursor , button to select 
OFF.
You can repeatedly play back a designated section of a DVD.
Press theSTEPbutton.■The picture moves forward one frame each time the button is pressed during playback.
A -  B
DVD
DVD
DivX
Step Function
 X30_TX35(1~39P) GB  2007.3.8  1:00 PM  Page 34
 
						

							GBOPERATION
37
• To operate this function, you can also press the AUDIO or SUBTITLE buttons on 
the remote control.
• Depending on the disc, the Subtitle and Audio Language functions may not be available.
1
Press the INFObutton twice.
2
Press the Cursor , button or numeric buttons to select the desired audio
language.■Depending on the number of languages on a DVD disc, a different audio language 
(ENGLISH, SPANISH, FRENCH, etc.) is selected each time the button is pressed. 
Audio Language Selection Function
SP 2/3FR 3/3
1
Press the INFObutton twice.
2
Press the Cursor button to move to SUBTITLE ( ) display.
3
Press the Cursor button or numeric buttons to select the desired subtitle.
Subtitle Language Selection Function
EN 1/3EN 01/ 03
OFF
SP 02/ 03FR 03/ 03OFF / 03
DVDDVD
36
Using the Playback Function
(Con’t)
• This function will not work if the DVD is recorded with multi-camera angle format.
• Black bars may not disappear because some DVD discs have a built-in horizontal to 
vertical ratio.
• This feature is not supported for DivX discs.
• During the EZ View operation, some of the left and right sides may be cut slightly.
Press theEZ VIEWbutton.Each time the button is pressed, the zoom function will switch between On and Off.
When a movie is played in Widescreen format, black bars at the top and bottom of the TV
screen can be removed by pressing the EZ VIEW button.
EZ VIEW Function
EZ VIEW
EZ VIEW OFF
DVD• If you eject the disc, switch the power off, or unplug the player, you will need to re-enter
the key number.
When you play a DVD-Audio disc that has a bonus group, the key number
input screen appears automatically. 
Some DVD-Audio discs have an extra ‘bonus’ group that requires a 4-digit key number to access. See the disc packaging
for details and the key number.
Bonus Group
During playback, press the  button on the remote control. You can select the desired image from a DVD-Audio disc containing still images.
With some discs, you may not be able to select images.
,
Navigating PagesBONUS GROUP
KEY NUMBER : 
DVD-AUDIO
DVD-AUDIO
 X30_TX35(1~39P) GB  2007.3.8  1:00 PM  Page 36
 
						

							GBOPERATION
39
Using the Disc MenuUsing the Title Menu
• The disc menu display may be different depending on the disc.
1
In Stop mode, press the MENUbutton.
2
Press the Cursor , button to move to and then press
the ENTER button.■When you select Disc Menu and it is not supported by the disc, the  message appears on the screen.
3
Press the Cursor , , , button to select the desired item.
4
Press theENTERbutton.
You can use the menus for the audio language, subtitle language, profile, etc. 
DVD menu contents differ from disc to disc.
• The Title menu display may be different depending on the disc.
1
In Stop mode, press the MENUbutton.
2
Press the Cursor , button to move to .
3
Press theENTERbutton.■The title menu appears.Press theEXITbutton to exit the setup screen.Press theEXITbutton to exit the setup screen.
For DVDs containing multiple titles, you can view the title of each movie. Depending on the disc, the availability of this fea-
ture may vary.
DVDDVD
ENTER MOVE EXITENTER MOVE EXIT
38
Using the Playback Function
(Con’t)
Moving Directly to a Scene/Song
1
Press theINFObutton.
2
Press the Cursor , button or numeric buttons to select the
desired title/track ( )  and then press theENTERbutton.
3
Press the Cursor , button to move to the Chapter ( ) display.
4
Press the Cursor , button or numeric buttons to select the
desired chapter and then press the ENTERbutton.
5
Press the Cursor , button to move to time ( )  display.
6
Press the numeric buttons to select the desired time and then press
the ENTERbutton.
Press the numericbuttons.■The selected file will be played.■When playing an MP3 or JPEG disc, you cannot use the Cursor
,
button to move to a folder. 
To move a folder, press the STOP() and then press the Cursor,
button.
• You can press the  button on the remote control to move directly to the desired
title, chapter, or track.
• Depending on the disc, you may not be able to move to the selected title or time.01/05
001/040 0:00:37 1/1
DVD
CD
MP3
JPEG
DVD
CD
MP3
JPEG
 X30_TX35(1~39P) GB  2007.3.8  1:00 PM  Page 38