Samsung Ht Tz325r User Manual

							21
ENG
●  CONNECTIONS●  CONNECTIONS
Subwoofer
Centre Speaker
Front Speaker (R) Front Speaker (L)
 HT-Z320
ipodAUX IN 2
Rear Speaker (R)
Rear Speaker (L)
Centre Speaker
Front Speaker (L)
Front Speaker (R)
Speaker
Subwoofer
ipod
 HT-TZ322
Rear Speaker (R) Rear Speaker (L)
ipodAUX IN 2
 HT-TZ325 
Front Speaker (R)
Rear Speaker (R) Front Speaker (L)
Rear Speaker (L)
Subwoofer
Centre Speaker 
Stand
Connecting the Front, Centre,Rear and Subwoofer Speakers
Press down the terminal tab on the back of the speaker. 
 
1. 
Insert the black wire into the black terminal (–) and the red 
2. 
wire into the red terminal(+), and then release the tab.
Connect the other end of the speaker cable to the 
3. 
connecting jacks on the back of the Home Theatre and 
Wireless Receiving Module.
Make sure the colours of the connecting plugs match the connecting jacks.
•	
Black
Red
    
						

							22
Connections
 
 
M HT-Z420/TZ422/TZ425 doesn’t have rear speaker connectors on the main unit.The rear speakers are  
`
connected to the Wireless module.
The rear speakers for HT-Z320/TZ322/TZ325 can also be connected to the Wireless module 
 
`
(SWA-4100) if you  purchase it separately.
The 
 
`HT-Z420/TZ422/TZ425 only can connect with wireless receiving module (SWA-4100).
Connecting the Front, rear, Centre and Subwoofer Speakers
 
 
M 
If you place a speaker near your TV set, screen colour may be distorted because of the magnetic field  
`
generated by the speaker. If this occurs, place the speaker away from your TV set.
Centre Speaker
Front Speaker (L)
Front Speaker (R)
HT-Z420/TZ422
Subwoofer
Centre Speaker
Front Speaker (R) Front Speaker (L)
Do not let children play with or near the speakers. They could get hurt if the speaker fa\
lls. 
`
When connecting the speaker wires to the speakers, make sure that the polarity (+/  –) is correct. 
`
  
Keep the subwoofer speaker out of the reach of children so as to prevent them from inserting their hands or  
`
alien substances into the duct (hole) of the subwoofer speaker.
   Do not hang the subwoofer on the wall through the duct (hole).
 
`
Rear Speaker (L) Rear Speaker (R)
WIRELESS RECEIVER MODULE
HT-Z420
Subwoofer
WIRELESS RECEIVER MODULE
Rear Speaker (L) Rear Speaker (R)
FM ANT
FM ANT
HT-TZ425
Speaker
Stand
 HT-TZ422/TZ425
 
						

							23
ENG
●  CONNECTIONS●  CONNECTIONS
CONNECTING THE WIrELESS rECEIVING AMPLIFIEr 
 Wireless receiving Module (SWA-4100)  
 
Connect the front, Centre and Subwoofer speakers to the  
1. 
DVD Player, referring to page 21~22.
With the DVD Player turned off, insert the TX card into the   
2. 
TX Card Connection (WIRELESS) on the back of the main unit.
Hold the TX card so that the slanted side faces to the left   
•	
and insert the card into the port. 
The TX card enables communication between the main   
•	
unit and the wireless receiver. 
Connect the left and right rear speakers to the wireless  
3. 
receiving module. 
Plug the power cord of the wireless receiving module  
4. 
in the wall outlet 
AUX IN 2
Slanted side face leftTX card
WIRELESS RECEIVER MODULE
ipod
RESET
Rear Speaker (L)
Rear Speaker (R)
Subwoofer
Front Speaker (R)
Front Speaker (L)
Centre Speaker
 
 
M HT-Z420/TZ422/TZ425 doesn’t have rear speaker connectors on the main unit.The rear speakers are  
`
connected to the Wireless module.
The rear speakers for HT-Z320/TZ322/TZ325 can also be connected to the Wireless module 
 
`
(SWA-4100) if you  purchase it separately.
The 
 
`HT-Z420/TZ422/TZ425 only can connect with wireless receiving module (SWA-4100).
 
						

							24
Connections
Do not insert any other card except the provided TX card.    
`
If a different TX card is used, the product may be damaged or the card may not be 
removed easily.
Do not insert the TX card upside down or in the reverse direction.
 
`
   Insert the TX card when the DVD Player is turned off. Inserting the card when it is turned    
`
on may cause a problem.
If the TX Card is inserted and wireless receiving module setting is complete, sound is not 
 
`
output from the Rear Speaker connectors on the main unit.
  The wireless receiving antenna is built into the wireless receiver module. Keep the unit 
 
`
away from water and moisture.
For optimal listening performance, make sure that the area around the wireless receiver 
 
`
module location is clear of any obstructions.
If no sound is heard from the wireless rear speakers, switch the mode to DVD 5.1  
`
channel or Dolby ProLogic II .
In 2-CH mode, no sound will be heard from the wireless rear speakers. 
`
 
 
MPlace the wireless receiver module at the rear of the listening position. If the wireless  
`
receiver module is too close to the main unit, some sound interruption ma\
y be heard due 
to interference.
If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment, 
 
`
or any other device that uses the same frequency (2.4GHz) near the system, some sound 
interruption may be heard due to interference.
The transmission distance from the main unit to the wireless receiving module is about 33 
 
`
feet (10m), but may vary depending on your operating environment. If a steel-concrete wall 
or metallic wall is between the main unit and the wireless receiver module, the system may 
not operate at all, because the radio wave cannot penetrate metal.
This product is also compatible with the wireless receiver module SWA-4000.
 
`If the main unit doesn't make wireless connection, the system needs ID Setting between  
`main unit and wireless receiver module.With the main unit turned off, press remote 
control's number buttons "0" "1""3""5" and main unit will turn on. With the wireless 
receiver module turned on, press "ID SET" button on the back of the wireless module for 5 
seconds.
 
						

							25
ENG
●  CONNECTIONS●  CONNECTIONS
CONNECTING THE VIDEO OUT TO YOUr TV
Choose one of the three methods for connecting to a TV.
AUX IN 2
FM ANT
METHOD1   METHOD2
    (supplied)
METHOD3
METHOD 1 : HDMI
Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the DVD Player to the 
HDMI IN jack on your TV.HDMI enables you to view movies in High Definition on your HDTV.
METHOD 2 : Composite Video
Connect the supplied Video cable from the VIDEO OUT jack on the back of the DVD Player to the 
VIDEO IN jack on your TV.
METHOD 3 : Scart
If your television is equipped with a SCART input, connect a SCART (not supplied) from the AV OUT jack 
on the back panel of the main unit to the SCART IN jack on your television.  
VIDEO SELECT Function  
Press and hold the Number 0 (VIDEO SEL.) button on the remote control for over 5 seconds.
 or  will appear in the display. At this time, press the 
•	 Number 0 (VIDEO SEL.) 
button shortly to select between  and .
If Scart (RGB Input) is equipped for your TV, press the 
•	 Number 0 (VIDEO SEL.) button to select RGB 
mode.You can get a better picture quality by using Scart setting.
If Scart (RGB Input) is not equipped for your TV, press the
•	  Number 0 (VIDEO SEL.) button to select 
COMPOSITE mode.
 
MResolutions available for the HDMI output are 480p, 576p, 720p,1080i/1080p. 
` See page 27 for 
resolution setting.
This product operates in Interlace scan mode (576i, 480i) for component outpu\
t. 
`
If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate the Home  
`Cinema using the TV's remote control. This is only available with SAMSUNG TV's that support 
Anynet+(HDMI-CEC).
If your TV has the  
`  logo, then it supports the Anynet+ function.
  
						

							26
Connections
HDMI Auto Detection Function
The player's video output will automatically change to HDMI mode when co\
nnecting an HDMI cable 
while power is on.HDMI (High Definition Multimedia Interface)
•	
HDMI is an interface that enables the digital transmission of video and \
audio data with just a single connector.  
Using HDMI, the DVD Home Cinema transmits a digital video and audio sign\
al and displays a vivid 
picture on a TV having an HDMI input jack.
HDMI connection description
•	
HDMI connector - Supports video and digital audio data.
- HDMI outputs only a pure digital signal to the TV.
-  If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise 
appears on the screen.
Why does Samsung use HDMI?
•	
Analogue TV's require an Analogue video/audio signal. However, when playing a DVD, the data 
transmitted to a TV is digital. Therefore either a digital-to-Analogue converter (in the DVD Home 
Cinema) or an Analogue-to-digital converter (in the TV) is required. During this conversion, the picture 
quality is degraded due to noise and signal loss. HDMI technology is sup\
erior because it requires no 
D/A conversion and is a pure digital signal from the player to your TV.
What is the HDCP?
•	
HDCP (High-band width Digital Content Protection) is a system for protecting DVD content outputted 
via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) 
and a display device (TV, projector. etc). Content is encrypted at the source device to prevent 
unauthorized copies from being made.
What is Anynet+?
•	
Anynet+ is a convenient function that offers linked operation of this unit through Samsung TV's with 
the Anynet+ feature.
-  If your Samsung TV has an 
 logo, then it supports the Anynet+ function.
-       If you turn on the player and insert a disc, the player will start playing the dis\
c, and the TV will turn on 
automatically and switch to HDMI mode.
-   If you turn on the player and press the Play button with a disc already inserted, the TV will 
immediately turn on and switch to HDMI mode.
 
						

							27
ENG
●  CONNECTIONS●  CONNECTIONS
HDMI FUNCTION
resolution Selection
This function allows the user to select the screen resolution for 
HDMI output.
In Stop mode, press and hold the SD/HD (Standard 
Definition/High Definition) button on the remote control until 
the resolution changes.Resolutions available for the HDMI output are 
•	
576p(480p), 720p, 1080i/1080p.
SD(Standard Definition) resolution is 576p(480p) and HD  
•	
(High Definition) resolution is 720p, 1080i/1080p.
 
MIf the TV does not support the configured resolution,  
`
you will not be able to see the picture properly.
When a HDMI cable is connected, composite(Video)  
`
and component video signals are not output.
See your TV owner's manual for more information on 
 
`
how to select the TV's Video Input source. Why use HDMI (High Definition 
Multimedia Interface)? 
This device transmits a DVD 
video signal digitally without 
the process of converting to 
Analogue. You will get sharper 
digital pictures when using an 
HDMI connection.
BD Wise (Samsung products only)
You can select to use the BD Wise menu only if the Samsung home theatre is connected to a Samsung 
TV that supports BD Wise using an HDMI cable.
What is BD Wise?
•	
BD Wise automatically adjusts BD Wise-compliant Samsung products to the optimal settings between them.
This feature is enabled only if BD Wise-compliant Samsung products are connected to each other using an 
HDMI cable.
To use BD Wise
•	
Use an HDMI cable to connect the Samsung home theatre to a BD Wise-compliant Samsung TV.
1. 
Set each BD Wise menu of the Samsung home theatre and the Samsung TV to On, respectively.
2. 
   - This will optimize the picture quality according to the content (In the disc, DVD, etc) that you want  
   to play.
     - This will also optimize the picture quality between the home theatre and your BD Wise-compliant     
     Samsung TV.
 
MIf you want to change the resolution in BD Wise mode, you must set BD mode to Off in advance. 
`
If you set the BD Wise mode to off, the resolution of the connected TV will be adjusted to its   
`
maximum resolution automatically.
BD Wise will be disabled if the player is connected to a device that does no\
t support BD Wise.
 
`
BD WISE              :   ON
HDMI VIDEO OUT:    RGB              
TV DISPLAY         :    WIDE/HDTV              
PARENTAL           :    OFF              PASSWORD         :    CHANGE              
LANGUAGE
MOVE ENTEREXIT
RETURN
  
						

							28
Connections
HDMI FUNCTION
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung 
Devices with your Samsung TV's remote control.  Anynet + can be 
used by connecting this Home Cinema to a SAMSUNG TV using a 
HDMI Cable. This is only available with SAMSUNG TV's that 
support Anynet+.
Connect the main unit of the Home Cinema to a Samsung 
1. 
TV with an HDMI cable. (See page 25)
Set the Anynet+ function on your TV.  
2. 
(See the TV instruction manual for more information.)
You can operate the Home Cinema by using the TV 
•	
remote control. (Available TV buttons : 
, , , , 
 , and  , buttons,~ button)
If you select the TV
Set the Anynet+(HDMI-CEC) to On by pressing the Anynet+ 
button on your TV remote control.
• 
receiver : On : You can listen to audio through the Home Cinema.
• receiver : Off : You can listen to audio through the TV.
If you select the THEATrE
Select THEATrE to connect and set the option of each item 
below.
• View TV : If Anynet+(HDMI CEC) is set to on and you select  
                    View TV, the home cinema will automatically  
                     switch to digital in mode.
• Theatre Menu : You can access and control the Home cinema menu.
• Theatre Operation :   The Home Cinema disc playback information will be displayed.   
You can control the Disc operation of the Home Cinema such as title, chapter and subt\
itle 
change.
• Receiver : On : You can listen to audio through the Home Cinema.
• Receiver : Off : You can listen to audio through the TV.
 
MIf you choose 'View TV' and want to listen to TV sound through Digital In, you have to  
`
connect an optical cable between the TV and the Home Theatre.
With Anynet+
You can operate this unit, power 
on your TV, or watch a movie by 
pressing the Play button on your 
Samsung TV's remote control.
Move Ent
er
Exit
SetupConnected to Playe rOff  On   
View T VTHEA TER
THEATER Menu
MOVEENTEREXIT
MOVEENTEREXITMove Ent
er
Exit
SetupConnected to Playe rOff  On   
View T VTHEA TER
THEATER Menu
MOVEENTEREXIT
 
						

							29
ENG
●  CONNECTIONS●  CONNECTIONS
CONNECTING AUDIO FrOM EXTErNAL COMPONENTS
AUX1 : Connecting an External Component/MP3 player
Components such as an MP3 Player.
FUNC.
Audio Cable
 (not supplied)
Audio OUT 
Connect AUX IN 1 (Audio) on the Home Cinema to the Audio Out of the ex\
ternal component/             
1. 
MP3 player.  
Press the 
2.  AUX button on the remote control to select AUX1 input.
You can also use the 
•	 FUNCTION button on the main unit.  
    The mode switches as follows :   
    DVD/CD ➞ D.IN  ➞ AUX 1  ➞ AUX 2  ➞ USB ➞  B/T   ➞ FM.
  
						

							30
Connections
Optical Cable
(not supplied)
AUX2 : rear PanelOPTICAL : rear Panel
External Analogue 
Component External Digital Component
FM ANTFM ANT
AUX2 : Connecting an External Analogue Component
Analogue signal components such as a VCR.
 
Connect AUX IN 2 (Audio) on the Home Cinema to the Audio Out of the ex\
ternal Analogue  
1. 
    component.
   Be sure to match connector colours.  
•	
 
Press the 
2.  AUX button on the remote control to select AUX 2 input. 
You can also use the
•	  FUNCTION button on the main unit.  
           The mode switches as follows :   
           DVD/CD ➞ D.IN  ➞ AUX 1  ➞ AUX 2  ➞ USB ➞  B/T   ➞ FM.
 
M  
You can connect the Video Output jack of your VCR to the TV, and connect the Audio  
`
Output jacks of the VCR to this product.
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
Connect the Digital Input (OPTICAL) on the Home Cinema to the Digital \
Output of the external  
1. 
  digital component.
Press the 
2.  AUX button on the remote control to select DIGITAL IN.
 You can also use the 
•	 FUNCTION button on the main unit to select D-IN. 
The mode switches as follows :   
DVD/CD ➞ D.IN  ➞ AUX 1  ➞ AUX 2  ➞ USB ➞  B/T   ➞ FM.
Audio Cable (not supplied)
If the external Analogue 
component has only one Audio 
Out, connect either left or right.