Samsung Ht Tz212 User Manual

							
11
ENG

●  DESCrIPTION

●  DESCrIPTION

rEAr PANEL
TX CARD CONNECTION (WIRELESS) 
(HT-Z310/TZ312/TZ315 only)
The TX card enables communication between the main unit and the 
optional wireless receiver amplifi er.
VIDEO OUTPUT JACK Connect the TV's Video Input jack (VIDEO IN) to the VIDEO OUT jack.
AUX IN 2 JACKSConnect to the 2CH analog output of an external device (such as a VCR)
External Digital Optical Input JackUse this to connect external equipment capable of digital output.
HDMI OUT JACKUse the HDMI cable, connect this HDMI output terminal to the HDMI input 
terminal on your TV for the best quality picture.
SCART JACKConnect to a TV with scart input jack.
COMPONENT VIDEO OUTPUT JACKSConnect a TV with Component video inputs to these jacks.
FM 75Ω COAXIAL JACKConnect the FM antenna.
SPEAKER OUTPUT CONNECTORSConnect the front, center, rear speakers and subwoofer.
10COOLING FAN
The fan always revolves when the power is on. Ensure a minimum of 
4 inches of clear space on all sides of the fan when installing the 
product.
AUX IN 2AUX IN 2
AUX IN 2
1
10
4
HT-Z210/TZ212/TZ215 doesn't support wireless receivng function.M`

Ht-Z310-CIS-ENG-0403.indd   112008-04-03   �� 7:10:26 
						

							
1
remote control
TOUr OF THE rEMOTE CONTrOL
DVD RECEIVER DVD
REMAIN
STEPPAUSE
PORT
AUDIOSUBTITLE

1



4


1
0





4
 1
0
1
1
1 1
14 1 1
11
10





4



1

Ht-Z310-CIS-ENG-0403.indd   122008-04-03   �� 7:10:28 
						

							
1
ENG

●  rEMOTE CONTrOL
●  rEMOTE CONTrOL
1PORt button
1 OPEN/CLOSE button
TV/VIDEO button
RDS Selection buttons
4CANCEL button 
PAUSE button

 PLAY button
 StOP button
SEARCH buttons
TUNING/CH button
MUTE button
RETURN button
Cursor/ENTER button
SUBTITLE button
EXIt
 button
INFO button
SOUND EDIT button
REPEAt button 
MIC VOL button
DSP/EQ button
LOGO button
DIMMER button
1DVD RECEIVER button
TV button
POWER button
4
Number (0~9) buttonsNumber 8 button: COMPONENT SEL.Number 0 button: VIDEO SEL.
REMAIN button
StEP button
Tuning Preset/CD Skip buttons
VOLUME button
MENU button
10AUDIO button
11PL II MODE button
1TUNER MEMORY, SD(Standard 
Definition)/HD(High Definition) button
1ZOOM button
14P.BASS button
1SLEEP button
1ECHO button
1SLOW, MO/ST button
1PL II EFFECT button
1
 DVD DVD button
 DVD TUNER button
 
DVD
 AUX button


4


1
0



Insert Remote batteries
1. 
Remove the battery 
cover in the direction 
of the arrow. . 
  Insert two 1.v AAA batteries, paying 
attention to the correct polarities  
(+ and –). . 
Replace the battery 
cover. 
Follow these precautions to avoid leaking or cracking cells:
Place batteries in the remote control so they match the polarity : (+) to (+) and (–) to (–).
    Use the correct type of batteries. Batteries that look similar may differ in voltage.
Always replace both batteries at the same time.
Do not expose the batteries to heat or a flame.
M
`
`
`
`

Ht-Z310-CIS-ENG-0403.indd   132008-04-03   �� 7:10:30 
						

							
14
Operation range of the remote Control
The remote control can be used up to approximately 
23 feet (7 meters) in a straight line. 
It can also be operated at a horizontal angle of up to 30° from the 
remote control sensor.
When operating a TV with the remote control
1.   Press the TV button to set the remote to TV mode. 
2.   Press the POWEr button to turn on the TV.
3.  While holding down the POWEr button, enter the code     
     corresponding to your brand of TV.
If there is more than one code listed for your TV in the 
table, enter one at a time to determine which code works.
  
Example : For a Samsung TV
While holding down the POWEr button, use the number 
buttons to enter 00, 15, 16, 17 or 40.
4.   If the TV turns off, the setting is complete.   
You can use the TV POWER, VOLUME, CHANNEL, and 
Numeric buttons (0~9).
 The remote control may not work on some brands of TVs. Also, some operations may not 
be possible depending on your brand of TV.
   If you do not set the remote control with the code for your brand of TV, the remote control 
will work on a Samsung TV by default.
~
~
M`
`
SETTING THE rEMOTE CONTrOL
You can control certain functions of your TV with this remote control.
remote control

Ht-Z310-CIS-ENG-0403.indd   142008-04-03   �� 7:10:31 
						

							
1
ENG

●  rEMOTE CONTrOL
●  rEMOTE CONTrOL
TV Brand Code List
Admiral (M.Wards)
A Mark
Anam
AOC
Bell & Howell (M.Wards)
Brocsonic
Candle
Cetronic
Citizen
Cinema
Classic
Concerto
Contec
Coronado
Craig
Croslex
Crown
Curtis Mates
CXC
Daewoo
Daytron
Dynasty
Emerson
Fisher
Funai
Futuretech
General Electric (GE)
Hall Mark
Hitachi
Inkel
JC Penny
JVC
KTV
KEC
KMC
LG (Goldstar)
Luxman
LXI (Sears)
Magnavox
Marantz
Matsui
MGA
Mitsubishi/MGA
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
3738
39
40
41
42
43
56, 57, 58
01, 15
01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 
12, 13, 14
01, 18, 40, 48
57, 58, 81
59, 60
18
03
03, 18, 25
97
03
18
46
15
03, 05, 61, 82, 83, 84
62
03
59, 61, 63
03
02, 03, 04, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,  
25, 26, 27, 28, 29, 30, 32, 34, 35, 36, 48, 59, 90
40
03
03, 15, 40, 46, 59, 61, 64, 82, 83, 84, 85
19, 65
03
03
06, 40, 56, 59, 66, 67, 68
40
15, 18, 50, 59, 69
45
56, 59, 67, 86
70
59, 61, 87, 88
03, 15, 40
15
01, 15, 16, 17, 37, 38, 39, 40, 41, 42, 43, 44
18
19, 54, 56, 59, 60, 62, 63, 65, 71
15, 17, 18, 48, 54, 59, 60, 62, 72, 89
40, 54
54
18, 40
18, 40, 59, 60, 75
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
MTC
NEC
Nikei
Onking
Onwa
Panasonic
Penney
Philco
Philips
Pioneer
Portland
Proton
Quasar
Radio Shack
RCA/Proscan
Realistic
Sampo
Samsung
Sanyo
Scott
Sears
Sharp
Signature 2000 (M.Wards)
Sony
Soundesign
Spectricon
SSS
Sylvania
Symphonic
Tatung
Techwood
Teknika
TMK
Toshiba
Vidtech
Videch
Wards
Yamaha
York
Yupiteru
Zenith
Zonda
Dongyang
18
18, 19, 20, 40, 59, 60
03
03
03
06, 07, 08, 09, 54, 66, 67, 73, 74
18
03, 15, 17, 18, 48, 54, 59, 62, 69, 90
15, 17, 18, 40, 48, 54, 62, 72
63, 66, 80, 91
15, 18, 59
40
06, 66, 67
17, 48, 56, 60, 61, 75
18, 59, 67, 76, 77, 78, 92, 93, 94
03, 19
40
00, 15, 16, 17, 40, 43, 46, 47, 48, 49,  
59, 60, 98
19, 61, 65
03, 40, 60, 61
15, 18, 19
15, 57, 64
57, 58
50, 51, 52, 53, 55
03, 40
01
18
18, 40, 48, 54, 59, 60, 62
61, 95, 96
06
18
03, 15, 18, 25
18, 40
19, 57, 63, 71
18
59, 60, 69
15, 17, 18, 40, 48, 54, 60, 64
18
40
03
58, 79
01
03, 54
No.BrandCodeNo.BrandCode

HT-Z310-CIS-ENG-0403.indd   152008-04-03   �� 7:10:31 
						

							
1

connections

CONNECTING THE SPEAKErS
Position of the DVD Player
Place it on a stand or cabinet shelf, or under the TV stand.
Selecting the Listening PositionThe listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV.  
Example :   
For 32" TVs 2~2.4m (6~8feet)      For 55" TVs 3.5~4m (11~13feet)
Front SpeakerseiPlace these speakers in front of your listening position, facing inwards (about 45°) toward you.
Place the speakers so that their tweeters will be at the same height as your ear.
Align the front face of the front speakers with the front face of the center speaker or place them slightly in front  of the center speakers.
Center Speaker f
It is best to install it at the same height as the front speakers. You can also install it directly over or under the TV.
rear Speakers hj Place these speakers behind your listening position. If there isn't enough room, place these speakers so they face each other. Place them about 60 to 90cm (2 to 3feet) above your ear, facing slightly downward.
*  
Unlike the front and center speakers, the rear speakers are used to handle mainly sound effects and sound will not come from them all the time.
Subwoofer 
The position of the subwoofer is not so critical. Place it anywhere you like.
This section involves various methods of connecting the Digital Home Cin\
ema to other external components. 
Before moving or installing the product, be sure to turn off the power a\
nd disconnect the power cord.

Ht-Z310-CIS-ENG-0403.indd   162008-04-03   �� 7:10:32 
						

							
1
ENG

●  CONNECTIONS

●  CONNECTIONS

Front/rear & Center Speakers Cradle Stand and Wall Mount Installation
Front/rear Speaker & Center Speaker
HT-Z210
FrontCradle Stand Type (Braket not included)
RearCradle Stand Type (Braket not included)
CenterCradle Stand Type (Braket not included)
HT-TZ212
FrontTallboy Stand Type
RearCradle Stand Type (Braket not included)
CenterCradle Stand Type (Braket not included)
HT-TZ215
FrontTallboy Stand Type
RearTallboy Stand Type
CenterCradle Stand Type (Braket not included)
HT-Z310
FrontCradle Stand Type or Wall Maunt Stand Type
RearCradle Stand Type or Wall Maunt Stand Type
CenterCradle Stand Type or Wall Maunt Stand Type
HT-TZ312
FrontTallboy Stand Type
RearCradle Stand Type or Wall Maunt Stand Type
CenterCradle Stand Type or Wall Maunt Stand Type
HT-TZ315
FrontTallboy Stand Type
RearTallboy Stand Type
CenterCradle Stand Type or Wall Maunt Stand Type
Speaker Components
CRADLE STAND/
WALL MOUNT
SPEAKER
HT-Z310
HT-TZ312
HT-Z310
HT-TZ212/TZ312
HOLE COVER
HT-Z310
HT-TZ312
HT-Z210HT-Z310
SPEAKER 5EA5EA
CRADLE STAND/
WALL MOUNT—5EA
HOLE COVER—5EA
ModelITEMHT-TZ212HT-TZ312
SPEAKER 3EA3EA
CRADLE STAND/
WALL MOUNT—3EA
HOLE COVER—3EA
ModelITEM
HT-Z210

HT-Z310-CIS-ENG-0403.indd   172008-04-03   �� 7:10:35 
						

							
1

connections

Front / rear & Center Speakers Cradle Stand and Wall Mount Installation
Installing the Wall Mount
 

111.   Insert the wall mount so that it fi  ts into the 
rear hole of the speaker as in the fi gure.
2.   Turn the wall mount counter clockwise to 
fi x it. (This is the reverse direction to the 
cradle stand.)
1.   Insert the stand so that it fi ts into the hole 
as described in the fi gure.
2.   Turn the stand clockwise to lock it.
(Turning it counter-clockwise will loosen
from the hole.)
3.  This is the completion of the stand
      installation.
 
   The speaker system may vary, depending on the model. Please check your speaker system to 
see if it includes the correct package of "Front/rear & Center Speakers" corresponding to 
your model.
M`
Installing the Cradle Stand 


11

Ht-Z310-CIS-ENG-0403.indd   182008-04-03   �� 7:10:38 
						

							
1
ENG

●  CONNECTIONS

●  CONNECTIONS

ModelItem NameQuantity
HT-TZ212/TZ312
SPEAKER 2EA
STAND2EA
STAND BASE2EA
SCREW (Large)4EA
SCREW (Small) 4EA/6EA
ModelItem NameQuantity
HT-TZ215/TZ315
SPEAKER 4EA
STAND4EA
STAND BASE4EA
SCREW (Large)8EA
SCREW (Small) 8EA/12EA
Speaker Components
3.   Put the hole cover on the hole of the 
speaker.
4.   Use a coin turn the hole cover clock wise 
to fi x it. (Turning it counter-clock wise will 
loosen from the hole.)
5.  Use the wall mount hole (bracket) to install
     the speaker on the wall.
   The speaker system may vary, depending on the model. Please check your speaker system to see if it includes the correct package of "Front/rear & Center Speakers" corresponding to your model.
To avoid the speakers accident falling and consequently damaging yourself and the 
equipment, make sure the speaker is hung safely.
M`
`



44
Front/rear Tallboy Stand
 
Installing the Wall Mount (Con't)
SPEAKER
HT-TZ212/TZ312
HT-TZ215/TZ315
HT-TZ212/TZ312
HT-TZ215/TZ315
STAND
HT-TZ212/TZ312
HT-TZ215/TZ315
STAND BASESCREW (Small)
SCREW (Large)
HT-TZ212/TZ312HT-TZ215/TZ315
HT-TZ212HT-TZ312
HT-TZ215HT-TZ315

Ht-Z310-CIS-ENG-0403.indd   192008-04-03   �� 7:10:44 
						

							
0

connections

Front/rear Tallboy Stand
How to Install the Speaker on the Stand Base
Connect the SPEAKEr with the 
STAND BASE.
Insert the SCrEW into the hole on the rear 
of the speaker using a screwdriver as shown 
in the illustration.
This is the SPEAKEr successfully 
assembled with the Stand Base.
1.
.
.
1

SPEAKER
STANDBASE
   The speaker system may vary, depending on the model. Please check your speaker system to 
see if it includes the correct package of "Front/rear & Center Speakers" corresponding to 
your model.
M`
 Turn the STAND upside-down and connect 
it to the STAND BASE.
Insert two small SCrEWS into the two holes 
marked with arrows using a screwdriver as 
shown in the illustration. 
(HT-TZ215 : 2EA, HT-TZ315 : 3EA)
Insert a large SCrEW into the hole on the 
rear of the Speaker STAND.
Connect the assembled stand to the 
SPEAKEr.
Insert another large SCrEW into the hole on 
the rear of the speaker using a screwdriver 
as shown in the illustration.
This is the successfully assembled speaker. 
Make sure that the speaker is installed on a 
fl at and stable area. Otherwise it may be 
easily knocked over.
1.
.
.
4.
.
.
1
4

How to Install the Speaker on the Stand
STANDBASE
STAND
SPEAKER
STAND
   The speaker system may vary, depending on the model. Please check your speaker system to 
see if it includes the correct package of "Front/rear & Center Speakers" corresponding to 
your model.
M`

Ht-Z310-CIS-ENG-0403.indd   202008-04-03   �� 7:10:50