Samsung Ht Tz212 User Manual

1
ENG

●  CONNECTIONS

●  CONNECTIONS

Connecting the Front, rear, Center and Subwoofer Speakers
   Press down the terminal tab on the back of the speaker. 
  Insert the black wire into the black terminal (–) and the red wire into    
  the red (+) terminal, and then release the tab.
  Connect the connecting plugs to the back of the Home Cinema.
Make sure the colors of the speaker terminals match the colors of 
the connecting plugs.
1.
.
.
~
BlackRed
ipodAUX IN 2
In case of HT-Z310
Front...



connections

ipodAUX IN 2

HT-TZ215/HT-TZ315 only
Front Speaker (R)
Rear Speaker (R)
Front Speaker (L)
Rear Speaker (L)
Subwoofer
Connecting the Front, rear, Center and Subwoofer Speakers
  
If you place a speaker near your TV set, screen color may be distorted because of the 
magnetic field generated by the speaker. If this occurs, place the speaker away from your 
TV set.
M`
Do not let children play with or near the speakers. They could get hurt if a speaker falls.
When connecting the...


ENG

●  CONNECTIONS

●  CONNECTIONS

CONNECTING THE WIrELESS rECEIVING AMPLIFIEr  
(HT-Z310/TZ312/TZ315 ONLY)
 Wireless receiving Module (SWA-4000)  
   
  
Connect the front, center and Subwoofer speakers to the  
DVD Player, referring to page 21~22.
    
With the DVD Player turned off, insert the TX card into the 
 
TX Card Connection (WIRELESS) on the back of the main unit.
Hold the TX card so that the slanted side faces to the left  
and insert the card into the port. 
The TX card enables...

4

connections

Do not insert any other card except the TX card dedicated to the product.   
If a different TX card is used, the product may be damaged or the card may not be 
removed easily.
Do not insert the TX card upside down or in the reverse direction.
   Insert the TX card when the DVD Player is turned off. Inserting the card when it is turned 
 
on may cause a problem.
If the TX Card is inserted and wireless receiving module setting is complete, sound is not 
output from the Rear Speaker...


ENG

●  CONNECTIONS

●  CONNECTIONS

CONNECTING THE VIDEO OUT TO YOUr TV
Choose one of the four methods for connecting to a TV.
AUX IN 2
AUX IN 2
METHOD4(supplied)
METHOD1METHOD2
METHOD3
 
 
METHOD 1 : HDMI
Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the DVD Player to the 
HDMI IN jack on your TV.
METHOD 2 : Component Video
If your television is equipped with Component Video inputs, connect a Component video cable(not 
supplied) from the Component Video Output...



connections

METHOD 3 : Scart
If your television is equipped with a SCART input, connect a SCART (not supplied) from the AV OUT 
jack on the back panel of the main unit to the SCART IN jack on your television.
With the main unit turned off, press and hold the Number 8 (COMPONENT SEL.) button on the 
remote control for over 5 seconds.
 or  will appear in the display.
Press the Number 8 (COMPONENT SEL.) button shortly to select  to set SCART mode.  
VIDEO SELECT Function  
Press and hold the...


ENG

●  CONNECTIONS

●  CONNECTIONS

HDMI Auto Detection Function
The player's video output will automatically change to HDMI mode when connecting an HDMI cable 
while power is on.
HDMI (High Defi nition Multimedia Interface)
HDMI is an interface that enables the digital transmission of video and audio data with just a single connector.
Using HDMI, the DVD Home Cinema transmits a digital video and audio signal and displays a vivid 
picture on a TV having an HDMI input jack.
HDMI...



connections

HDMI FUNCTION
Using Anynet+(HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung 
Devices with your Samsung TV's remote control.  Anynet + can be 
used by connecting this Home Cinema to a SAMSUNG TV using a 
HDMI Cable. This is only available with SAMSUNG TVs that 
support Anynet+.
Connect the main unit of the Home Cinema to a Samsung 
TV with an HDMI cable. (See page 25)
Set the Anynet+ function on your TV. 
(See the TV instruction manual for more...


ENG

●  CONNECTIONS

●  CONNECTIONS

CONNECTING AUDIO FrOM EXTErNAL COMPONENTS
AUX1 : Connecting an External Component/MP3 player
Components such as an MP3 Player.
AUX IN 1
Audio Cable(not supplied)
Audio OUT
     Connect AUX IN 1 (Audio) on the Home Cinema to the Audio Out of the external component/MP3 
player.
Press the AUX button on the remote control to select AUX1 input.
You can also use the FUNCTION button on the main unit.
The mode switches as follows : 
DVD/CD ➞ D.IN ➞ AUX 1 ➞ AUX 2 ➞...

0
connections
Audio Cable (not supplied)If the external analog component has only one Audio Out, connect either left or right.
Optical Cable(not supplied)
AUX2 : rear PanelOPTICAL : rear Panel
External Analog ComponentExternal Digital Component
AUX IN 2AUX IN 2
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
    Connect AUX IN 2 (Audio) on the Home Cinema to the Audio Out of the external analog component.
 Be sure to match connector colors.
 Press the AUX...