Samsung Ht Txq120 Instruction Manual

ENG
OPERATION
41 40
Using the Playback Function(Con’t)
Moving Directly to a Scene/Song
1Press theINFObutton.
2Press the Cursor 
,button or numeric buttons to select the desired
title/track and then press theENTERbutton.
3Press the Cursor
,button to move to the Chapter ( ) display.
4Press the Cursor 
,button or numeric buttons to select the desired
chapter and then press the ENTERbutton.
5Press the Cursor 
,button to move to time ( ) display.
6Press the numeric buttons to select the desired time and then...

ENG
OPERATION
43 42
• CBI (Control/Bulk/Interrupt) is not supported.
• Digital Cameras that use PTP protocol or require additional program installation when connected 
to a PC are not supported.
• A device using NTFS file system is not supported. (Only FAT 16/32 (File Allocation Table 16/32) file 
system is supported.)
• Some MP3 players, when connected to this product, may not operate depending on the sector size of their
file system.
• The USB host function is not supported if a product that transfers...

ENG
SETUP
45 44
OSD(On-Screen Display) language is set to English by default.
Settings
1In Stop mode, press theMENUbutton.
2Press the Cursor button to move to and then press the ENTER button.
3Select and then press the ENTER button.
4Press the Cursor , button to select and then press
the ENTERbutton.
5Press the Cursor , button to select the desired language and then press
the ENTERbutton.
Once the setup is complete, the OSD will be English if English has been selected as language.
Press the RETURNbutton...

ENG
SETUP
47
Settings(Con’t)
46
Use this to restrict playback of adult or violent DVDs you do not want children to view.
1In Stop mode, press theMENUbutton.
2Press the Cursor button to move to and then press the ENTER button.
3Press the Cursor button to move to and then press the ENTER
button.
4Press the Cursor , button to select the desired rating level and then press
the ENTERbutton.
If you have selected Level 6, you cannot view DVDs with Level 7 or higher.
The higher the level, the closer the content...

ENG
SETUP
49 48
• Depending on PRO LOGIC and STEREO settings, the speaker mode may vary 
(see page 54).
Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker 
configuration and whether certain speakers are used or not.
1In Stop mode, press the MENU button.
2Press the Cursor  button to move to and then press the ENTER
button.
3In the , press the ENTERbutton again.
4Press the Cursor , , , button to move to the desired speaker and then
press the...

ENG
SETUP
51 50
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio
signals from the center and rear speakers.
1In Stop mode, press theMENUbutton.
2Press the Cursor button to move to and then press the ENTER button.
3Press the Cursor button to move to and then press the 
ENTERbutton.
4Press the Cursor , , , button to move to the desired speaker and then
press the ENTERbutton.
5Press the Cursor , button to set the Delay time.
You can...

ENG
SETUP
53 52
Settings(Con’t)
You can adjust the balance and level for each speaker.
1In Stop mode, press the MENUbutton.
2Press the Cursor button to move to and then press the ENTER button.
3Press the Cursor button to move to and then press the
ENTERbutton.
4Press the Cursor , button to select and adjust the desired item. 
Press the Cursor , button to adjust the settings.
Press the RETURNbutton to return to the previous level.
Press the MENUbutton to exit the setup screen.
Setting the Audio
Press the...

ENG
SETUP
55 54
You can select the desired Dolby Pro Logic II audio mode.
Press thePL II MODEbutton.
Each time the button is pressed, the mode changes as follows.
Dolby Pro Logic II Mode
PRO LOGIC II
• MUSIC: When listening to music, you can experience sound effects as if you are listening to the
actual performance.
• CINEMA : Adds realism to the movie soundtrack.
• PRO LOGIC : You will experience a realistic multi-channel effect, as if using five speakers, while
using just the front left and right...

ENG
57 56
By setting the auto sound calibration function just once when you relocate or install the unit, you can have the unit automatically recognize 
the distance between speakers, levels between channels, and frequency characteristics to create a 5.1-channel sound field optimized for 
the listeners environment.
Auto Sound Calibration
• If you have not perfomed the ASC function, pressing the Auto Sound Calibration button without connecting the auto sound 
calibration microphone will display the...

ENG
59 58
Live Surround Mode
Press the SUPER5.1button.
Each time the button is pressed, the selection alternates between and .
Selectto play 2-channel sound in 5.1 channels.
Super 5.1
• When you insert a DVD recorded in 2-channel or multi-channel format and press the SUPER 5.1 button, the message
 appears in the display and it will not work.
• This function does not work with SACD or DVD-AUDIO discs.
• 5.1 channel outputs are available in VIRTUAL 9.1 or EX-MOVIE mode only.
You can reproduce a 2-channel...