Samsung Ht Tx250 Instruction Manual

ENGOPERATION
41 40
• CBI (Control/Bulk/Interrupt) is not supported.• Digital Cameras that use PTP protocol or require additional program installation when connected 
to a PC are not supported.• Adevice using NTFS file system is not supported. (Only FAT 16/32 (File Allocation Table 16/32) file 
system is supported.)• Some MP3 players, when connected to this product,may not operate depending on the sector size
of their file system.• The USB HOST function is not supported if a product that transfers media...

ENGSETUP
43
42
OSD(On-Screen Display) language is set to English by default.
Settings
1
In Stop mode, press the MENUbutton.
2
Press the Cursor button to move to  and then press the  ENTER button.
3
Select  and then press the  ENTER button.
4
Press the Cursor , button to select  and then press
the  ENTER button.
5
Press the Cursor , button to select the desired language and then press
the ENTER button.Once the setup is complete, the OSD will be English if English has been \
selected as language.Press the...

ENGSETUP
45
Settings
(Con’t)
44
Use this to restrict playback of adult or violent DVDs you do not want children to view.
1
In Stop mode, press theMENUbutton.
2
Press the Cursor button to move to and then press the ENTER button.
3
Press the Cursor button to move to and then press the ENTERbutton.
4
Press the Cursor , button to select the desired rating level and then press
the ENTERbutton.
If you have selected Level 6, you cannot view DVDs with Level 7 or higher.
The higher the level, the closer the...

ENGSETUP
47 46
• Depending on PRO LOGIC and STEREO settings, the speaker mode may vary 
(see page 53).
Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker 
configuration and whether certain speakers are used or not.
1
In Stop mode, press the MENU button.
2
Press the Cursor button to move to and then press the ENTER button.
3
In the 

, press the ENTERbutton again.
4
Press the Cursor , , , button to move to the desired speaker and then
press...

ENGSETUP
49 48
Settings
(Con’t)
You can adjust the balance and level for each speaker.
1
In Stop mode, press the MENUbutton.
2
Press the Cursor button to move to and then press the ENTER button.
3
Press the Cursor button to move to and then press the
ENTERbutton.
4
Press the Cursor , button to select and adjust the desired item. 
Press the Cursor , button to adjust the settings.
Press the RETURNbutton to return to the previous level.
Press the EXITbutton to exit the setup screen.
Setting the Audio
Press...

ENGSETUP
51 50
Settings
(Con’t)
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to match
the video.
1
In Stop mode, press the MENUbutton.
2
Press the Cursor button to move to and then press the ENTER button.
3
Press the Cursor button to move to and then press the 
ENTERbutton.
4
Press the Cursor , button to select the AV-SYNC Delay Time  and then
press theENTERbutton.You can set the audio delay time between 0 ms and 300 ms. Set it to...

ENGSETUP
53
52
Settings
(Con’t)
DSP(Digital Signal Processor) : DSP modes have been designed to simulate different acoustic environments. 
EQ : You can select ROCK, POP, or CLASSIC to optimize the sound for the genre of music you are playin\
g
Sound Field (DSP)/EQ Function
•  The DSP/EQ functio nis only available in STEREO mode.
Press the PL II mode button to show STEREO on the display.
•  This feature works with CDs, MP3-CDs, 2 channel DVD-Audio, DivX and Dolb\
y Digital discs.
• When playing a DVD disc...

ENG55 54
Settings
(Con’t)
• When playing a DVD disc encoded with two or more channels, multi-channel mode will be
selected automatically and the  (Dolby Pro Logic II) button does not work.
This function works only in Dolby Pro Logic MUSIC mode.
1
Press the PL II MODEbutton to select mode.
2
Press the PL II EFFECTbutton to select  (PANORAMA), then press the Cursor
,buttons to select the desired effect setting.Yo u  can select either 0 or 1.
This mode extends the front stereo image to include the surround...

ENGMISCELLANEOUS
57
Listening to Radio
56
Presetting Stations
Example : Presetting FM 89.10 in the memory 
• This unit does not receive AM broadcasts.
1
Press theTUNERbutton to select the FM band.
2
Press the  button to select .
3
Press the TUNER MEMORYbutton. flashes in the display. 
4
Press the button to select preset number.You can select between 1 and 15 presets.
5
Press theTUNER  MEMORYbutton again.Press the TUNER MEMORY button before “number”disappears from the display.
“number”disappears from the...

59 58
Operating a TV with the Remote Control
1
Press theTVbutton to set the remote to TV mode.
2
Press the POWERbutton to turn on the TV.
3
While holding down the POWERbutton, enter the code corresponding 
to your brand of TV.
If there is more than one code listed for your TV in the table, enter one at a time to deter-
mine which code works.Example : For a Samsung TVWhile holding down the POWERbutton, use the number buttons to enter 00, 15, 16, 17 and 40.
4
If the TV turns off, the setting is complete....