Samsung Ht Tx250 Instruction Manual

DIGITAL HOME 
THEATER SYSTEMHT-X250
EJECT
COMPACT
DIGITAL AUDIO
ENG Instruction Manual
AH68-01943R
REV: 00
If you have any questions or comments relating to Samsung products, 
please contact the SAMSUNG customer care center.
Samsung Electronics America, Inc.
1-800-SAMSUNG (7267864)
www.samsung.com
 HT-X250(1~41P)-SEA  2007.3.7  6:38 PM  Page 2
 

ENG3
Precautions
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your play-
er horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots are
not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become hot.
Before moving the player, ensure the Disc Insert Hole is empty. This...

4
ENG5
Features
Contents
Multi-Disc Playback & FM TunerThe HT-X250 combines the convenience of multi-disc playback capability, including DVD-AUDIO, DVD-VIDEO, CD, 
MP3-CD, WMA-CD, DivX, CD-R/RW, and DVD R/RW, with a sophisticated FM tuner, all in a single player.Dolby Pro Logic IIDolby Pro Logic II is a form of multi-channel audio signal decoding tech\
nology that improves upon existing Dolby Pro
Logic.DTS (Digital Theater Systems)DTS is an audio compression format developed by Digital Theater Systems...

6
ENG7
Notes on Discs
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the play\
er.(Your DVD player will only play DVDs that are labeled with identical regio\
n codes.)
1
6
~
•LD, CD-G, CD-I, CD-ROM and DVD-ROM discs cannot be played on this player\
.
If such discs are played, a 
message appears on the TV screen.•DVD discs...

8
ENG9
Front Panel
Side PanelAccessories 
Rear Panel
Video Cable
(AH39-40001V) Remote Control 
(AH59-01778P)FM Antenna 
(AH42-00017A)
Users Manual
(AH68-01943R)
1. Power ( ) button
2. Disc Insert Hole
3. Display
4. Eject button
5. Function button 
6.
Tuning Down & Skip ( ) button
7. Stop ( ) button
8. Play/Pause ( ) button 
9. Tuning Up & Skip ( ) button 
10. Volume Control button
1.  Headphone Jack
2.  AUX IN 1 Jack
3.  USB Port
1. 5.1 Channel Speaker Output Connectors
2. Component Video Output Jacks...

10
ENG11
Description
(Con’t)
Remote Control
1. DVD RECEIVER button 
2. TV button 
3. TV/VIDEO button
4. POWER button
5. Number (0~9) buttons
6. REMAIN button
7. STEP button
8. Tuning Preset/CD Skip buttons
9. VOLUME button
10. MENU button
11. AUDIO  button
12. PL II EFFECT button
13. PL II MODE button
14. TUNER MEMORY, SD(Standard
Definition)/HD(High Definition) button
15. ZOOM button
16. SLEEP button
17. SLOW, MO/ST button
18. EZ VIEW button
19. DVD button 
TUNER button
USB, AUX  button 
20. EJECT...

ENGCONNECTIONS
13 12
Connecting the Speakers
Rear Speakers•Place these speakers behind your listening position.•If there isnt enough room, place these speakers so they face
each other.•Place them about 60 to 90cm (2 to 3feet) above your ear, fac-
ing slightly downward.*Unlike the front and center speakers, the rear speakers are
used to handle mainly sound effects and sound will not
come from them all the time.
Front Speakers  •Place these speakers in front of your listening position, facing
inwards...

ENGCONNECTIONS
15 14
• Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close
to the main unit, some sound interruption may be heard due to interference.
• If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment, or any other device that
uses the same frequency (2.4GHz) near the system, some sound interruption may be heard due to interference.
• The transmission distance of a radio wave is about 33 feet, but may...

ENGCONNECTIONS
17 16
Installing the Main Unit
• Be careful not to scratch the surface the DVD Player when installing
the stand.  
• Do not turn the DVD Player left or right as it may separate it from the stand.
Method 1 : Installing the Stand so that the DVD Player Lays Flat.
Preparation: ■Disconnect the AC power cord from the AC outlet before installing the main unit.■Connect the cables before installation.
Method 2 : Installing the Stand so that the DVD Player Stands up.Arranging the Cables...

ENGCONNECTIONS
Choose one of the three methods for connecting to a TV.
Connecting the Video Out to your TV
19
18
Connect the supplied Video cable from the VIDEO OUT jack on the back of the DVD Player to the VIDEO IN jack
on your TV.METHOD 3 : Composite Video ....... (Good Quality) If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from
the Component Video Output (Pr, Pb and Y) Jacks on the back of the DVD Player to the Component Video Input
Jacks on...