Samsung Ht Tq22r Instruction Manual

GB
60
SETUP
This function works only in Dolby Pro Logic MUSIC mode.
Dolby Pro Logic II Effect
12
•You can select between 0 and 7.
•This sets the width of the center image. 
The higher the setting, the less sound comes
from the center speaker. 
•You can select between 0 and 6.
•Incrementally adjusts the sound field (DSP)from
the front or rear.
34
•When playing a DVD disc encoded with two or more channels, multi-channel mode will be
selected automatically and                 (Dolby Pro Logic II) button...

61
21
Tune in to the
desired station.Press the TUNER
button and select
the FM band.
Automatic Tuning 2
Manual Tuning
21
Select a broadcast
station.
Press the STOP(   )
button to select
PRESET and then press
button to select the preset station.Automatic Tuning 1
Press the
FUNCTION button to
select the FM band.
Press the STOP(   )
button to select MANUAL
and then press and hold
button to automatically search the band.Automatic Tuning 2
Press STOP(   ) to select
MANUAL and then briefly
press to tune in to a...

GB
62
To tune in to a preset station, press             on the 
remote control to select a channel.
•Refer to Step 2 on page 61 to
automatically or manually tune in
to a station.
21
•“PRGM” flashes in the display. 
3
Example: Presetting FM 89.1 in the memory 
Press TUNING/CH
to select 89.10.Press the TUNER
button and select the
FM band.
•Press the TUNER MEMORYbutton before
‘PRGM’ disappears from the display.
•‘PRGM’ disappears from the display and
the station is stored in memory.
54
•You can select...

63
• RDS may not operate correctly if the station tuned is not transmitting
RDS signal properly or if the signal strength is weak.
• If searching finishes at once,“PS”,and “RT” will not appear on the display.
Using the RDS (Radio Data System) to receive FM stations
What information can RDS signals provide?
RDS allows FM stations to send an additional signal along with their regular program signals. 
For example,the stations send their station names,as well as information about what  type of 
program they...

GB
64
PTY (Program Type) indication and PTY-SEARCH function
To search for a program using the PTY codes
Before you start, remember...
• The PTY Search is only applicable to preset
stations.
• To stop searching any time during the process,
press PTY SEARCH while searching.
• There is a time limit in doing the following steps. 
If the setting is cancelled before you finish, start
from step 1 again.
• When pressing the buttons on the primary remote
control, make sure that you have selected the FM
station...

65
• SLEEP will be displayed. Each time the button is pressed, the preset
time changes as follows: 10 ➝20 ➝30 ➝60 ➝90 ➝120 ➝150 ➝OFF.
Press SLEEPbutton.
Sleep Timer Function
You can set the time that the Home Theater will shut itself off.
Convenient Functions
•The remaining time before the Home Theater will shut itself off is displayed.
•Pressing the button again changes the sleep time from what you have set
earlier.
To confirm the sleep timer setting, press SLEEPbutton.
To cancel the sleep timer, press...

GB
66
•Each time the button is pressed, the brightness changes as follows:
DARK➞BRIGHT.
Adjusting Display Brightness
You can adjust the brightness of the display on the main unit so it wont interfere
with your movie viewing.
Press DIMMERbutton.
MISCELLANEOUS
•‘MUTE ON’appears in the display.
•To restore the sound, press the button again to 
select ‘MUTE OFF’.
Mute Function
This is useful when answering a doorbell or telephone call.
Press MUTEbutton.
HT-Q20(41~70) GB  3/1/06 2:45 PM  Page 65
 

Operating a TV with the Remote Control
•The remote control may not work on some brands of TVs. Also, some operations may not
be possible depending on your brand of TV.
•If you do not set the remote control with the code for your brand of TV, the remote control
will work on a Samsung TV by default.
When operating a TV with the remote control
1Press TVbutton to select TV mode.
2Press POWERbutton to turn on the TV.
3Point the remote control toward the TV.
4
While holding down POWER, enter the code...

GB
68
MISCELLANEOUS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43Admiral (M.Wards)
AMark
Anam
AOC
Bell & Howell (M.Wards)
Brocsonic
Candle
Cetronic
Citizen
Cinema
Classic
Concerto
Contec
Coronado
Craig
Croslex
Crown
Curtis Mates
CXC
Daewoo
Daytron
Dynasty
Emerson
Fisher
Funai
Futuretech
General Electric (GE)
Hall Mark
Hitachi
Inkel
JC Penny
JVC
KTV
KEC
KMC
LG (Goldstar)
Luxman
LXI (Sears)
Magnavox
Marantz
Matsui
MGA
Mitsubishi/MGA...

69
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
• Check the region number of the DVD.
DVD discs purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this Home
Theater.
• Make sure that the rating level is correct.
• Are you using a deformed disc or a disc with scratches on
the surface?
• Wipe the disc clean.
Disc tray does not open.
Playback does not start.
Playback does not start
immediately when the
Play/Pause...