Samsung Ht Ds900 Instruction Manual

50
SETUP
213
In Stop mode,
press MENU
button.Press Cursor
button to move to
‘Setup’ and then
press ENTERbutton.Press Cursor
button to move to
‘LOGO’ and then
press ENTERbutton.
To Change the Wallpaper
54
Press MENU
button to exit the
setup screen.Press      to select
the desired ‘USER’,
and then press
ENTER.
Press RETURNbutton to return to the previous level.
Press MENUbutton to exit the setup screen.
 41P~76P(DS700)-GB  2004.9.16  1:54 PM  Page 49
 

21
Press the MENU
button while the
disc tray is open.Press Cursor
button to move to
‘Setup’ and then
press ENTERbutton.
43
Press RETURNbutton to return to the previous level.
Press MENUbutton to exit the setup screen.
51
Press Cursor
button to move to
‘DVD TYPE’ and
then press ENTER
button.Press Cursor     ,
button to move to
‘DVD VIDEO’ and then
press ENTERbutton.
DVD Playback Mode
•DVD Play mode is set to DVD Audio as factory default setting.Note
Some DVD-Audio discs contain DVD-Video as well as...

52
SETUP
AV SYNC Setup
Press RETURNbutton to return to the previous level.
Press MENUbutton to exit the setup screen.
•Audio menu appears.
21
•Setup menu appears.
•AV-SYNC screen appears.
3
Press Cursor     ,     buttons
to move to ‘Audio’ and then 
press ENTERbutton.
Press Cursor     ,      buttons
to move to ‘AV-SYNC’ and
then press ENTERbutton. Press the MENUbutton.
4
•You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
Press Cursor      ,     buttons
to select the...

21
43
Setting the Speaker Mode
Signal outputs and frequency responses from the speakers will automatically be adjusted
according to your speaker configuration and whether certain speakers are used or not.
In Stop mode,
press MENU
button.Press Cursor
button to move to
‘Audio’ and then
press ENTERbutton.
In the Speaker
Setup, press the
ENTERbutton again.Press Cursor     ,     , 
,    buttons to move
to the desired
speaker and then
press ENTERbutton.
•For C, LS, and RS, each time the button
is pressed, the...

Setting the Test Tone
Press the Test Tone to check the speaker connections and to adjust the speaker levels.
L: Front Speaker (L) C: Center Speaker SW: Subwoofer 
R: Front Speaker (R) LS: Rear Speaker (L) RS: Rear Speaker (R)
Press RETURNbutton to return to the previous level.
Press MENUbutton to exit the setup screen.
54
SETUP
21
In Stop mode,
press MENU
button.Press Cursor
button to move to
‘Audio’ and then
press ENTERbutton.
3
Press Cursor      button
to move to ‘TEST
TONE’ and then press...

Setting the Delay Time
If the speakers cannot be placed at equal distances from the listening position, you can adjust the
delay time of the audio signals from the center and rear speakers.
55
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening position at different times depending on the
placement of speakers, you can adjust this difference by adding a delay...

56
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SURROUND SPEAKER
Ideal CENTER
SPEAKER placement
It is desirable to place all speakers within this circle.Ideal
SURROUND
SPEAKER
placement
SETUP
•You can set the delay time for C
between 00 and 05mSEC and for
LS and RS between 00 and
15mSEC.
435
Press Cursor      button
to move to ‘DELAY
TIME’ and then press
ENTERbutton.Press Cursor     ,     , 
,    buttons to move
to the desired
speaker and then
press...

57
Setting the Audio Quality
You can adjust the balance and level for each speaker.
21
43
In Stop mode,
press MENU
button.Press Cursor     
button to move to
‘Audio’ and then press
ENTERbutton.
Press Cursor      button
to move to ‘SOUND
EDIT’ and then press
ENTERbutton.Press Cursor      ,      , 
,      buttons to select
the desired item and then
press ENTERbutton.
Method 1When adjusting the audio quality using the setup screen
Press RETURNbutton to return to the previous level.
Press MENUbutton to exit...

Adjusting Front/Rear Speaker Balance
•You can select between 00 and –06 and OFF.
•The volume decreases as you move closer to –6.
Adjusting Center/Rear/Subwoofer Speaker Level
•The volume level can be adjusted in steps from +6dB to –6dB.
•The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
Method 2When manually adjusting with the SOUND EDIT button
21
Adjusting Front Speaker BalanceAdjusting Rear Speaker Balance
Press SOUND
EDITbutton and
then press Cursor    
,     .
3...

59
Setting the DRC (Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at
low volume at night.
12
In Stop mode, press
MENUbutton.Press Cursor     button to
move to ‘Audio’ and then
press ENTERbutton.
•The Cursor      button is pressed, the greater the effect, and
the Cursor      button is pressed, the smaller the effect.
34
Press Cursor     button to
move to ‘DRC’ and then
press ENTERbutton.Press Cursor     ,     to
adjust the ‘DRC’.
Press RETURNbutton...