Samsung Ht Ds900 Instruction Manual
Have a look at the manual Samsung Ht Ds900 Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
50 SETUP 213 In Stop mode, press MENU button.Press Cursor button to move to ‘Setup’ and then press ENTERbutton.Press Cursor button to move to ‘LOGO’ and then press ENTERbutton. To Change the Wallpaper 54 Press MENU button to exit the setup screen.Press to select the desired ‘USER’, and then press ENTER. Press RETURNbutton to return to the previous level. Press MENUbutton to exit the setup screen. 41P~76P(DS700)-GB 2004.9.16 1:54 PM Page 49
21 Press the MENU button while the disc tray is open.Press Cursor button to move to ‘Setup’ and then press ENTERbutton. 43 Press RETURNbutton to return to the previous level. Press MENUbutton to exit the setup screen. 51 Press Cursor button to move to ‘DVD TYPE’ and then press ENTER button.Press Cursor , button to move to ‘DVD VIDEO’ and then press ENTERbutton. DVD Playback Mode •DVD Play mode is set to DVD Audio as factory default setting.Note Some DVD-Audio discs contain DVD-Video as well as DVD-Audio. To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode. •Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play mode. When Selecting DVD Play Mode: •DVD VIDEO: set to play the DVD video contents contained in DVD audio disc. •DVD AUDIO: set to play the default DVD audio. 41P~76P(DS700)-GB 2004.9.16 1:54 PM Page 50
52 SETUP AV SYNC Setup Press RETURNbutton to return to the previous level. Press MENUbutton to exit the setup screen. •Audio menu appears. 21 •Setup menu appears. •AV-SYNC screen appears. 3 Press Cursor , buttons to move to ‘Audio’ and then press ENTERbutton. Press Cursor , buttons to move to ‘AV-SYNC’ and then press ENTERbutton. Press the MENUbutton. 4 •You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status. Press Cursor , buttons to select the Delay Time of AV-SYNC and then press the ENTERbutton. Video may look slower than the audio if it is connected with digital TV. In this case, adjust the delay time of audio to optimal status to fit the video. 41P~76P(DS700)-GB 2004.9.16 1:54 PM Page 51
21 43 Setting the Speaker Mode Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not. In Stop mode, press MENU button.Press Cursor button to move to ‘Audio’ and then press ENTERbutton. In the Speaker Setup, press the ENTERbutton again.Press Cursor , , , buttons to move to the desired speaker and then press ENTERbutton. •For C, LS, and RS, each time the button is pressed, the mode switches alternately as follows: SMALL › NONE. •For L and R, the mode is set to SMALL. 53 SMALL: Select this when using the speakers. NONE: Select this when no speakers are installed. •Depending on PRO LOGIC and STEREO, the speaker mode may vary. Note 41P~76P(DS700)-GB 2004.9.16 1:54 PM Page 52
Setting the Test Tone Press the Test Tone to check the speaker connections and to adjust the speaker levels. L: Front Speaker (L) C: Center Speaker SW: Subwoofer R: Front Speaker (R) LS: Rear Speaker (L) RS: Rear Speaker (R) Press RETURNbutton to return to the previous level. Press MENUbutton to exit the setup screen. 54 SETUP 21 In Stop mode, press MENU button.Press Cursor button to move to ‘Audio’ and then press ENTERbutton. 3 Press Cursor button to move to ‘TEST TONE’ and then press ENTERbutton. •The test tone will be sent to L › C › R › RS › LS › SW in that order. If the ENTER button is pressed again at this time, the test tone will stop. To end the test tone, press TEST TONEbutton. Press TEST TONEbutton. •Test tone will be produced as follows: When playing a DVD or CD, this will work only in Stop mode. •Use this function to check that each speaker is correctly connected and that there is no problem. When manually testing using the TEST TONEbutton Multi-Channel Pro Logic Mode Start 41P~76P(DS700)-GB 2004.9.16 1:54 PM Page 53
Setting the Delay Time If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and rear speakers. 55 Setting up the Speaker Delay Time When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Center Speaker and Surround Speakers. 21 In Stop mode, press MENU button.Press Cursor button to move to ‘Audio’ and then press ENTER button. •With (Dolby Pro Logic II), the delay time may be different for each mode. •With AC-3 and DTS, the delay time can be set between 00 and 15mSEC. Note 41P~76P(DS700)-GB 2004.9.16 1:54 PM Page 54
56 Df: The distance from FRONT SPEAKER Dc: The distance from CENTER SPEAKER Ds: The distance from SURROUND SPEAKER Ideal CENTER SPEAKER placement It is desirable to place all speakers within this circle.Ideal SURROUND SPEAKER placement SETUP •You can set the delay time for C between 00 and 05mSEC and for LS and RS between 00 and 15mSEC. 435 Press Cursor button to move to ‘DELAY TIME’ and then press ENTERbutton.Press Cursor , , , buttons to move to the desired speaker and then press ENTERbutton. Press Cursor , to set the Delay time. 0 ms 3 ms 6 ms 9 ms 12 ms 15 ms • Setting REAR (SURROUND) SPEAKERS If the distance of Df is equal to the distance of Ds in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. • Setting CENTER SPEAKER If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. Distance between Df and Dc Delay Time Delay Time 0 ms 1 ms 2 ms 3 ms 4 ms 5 ms Distance between Df and Ds 0.00 m 0.34 m 0.68 m 1.02 m 1.36 m 1.70 m 0.00 m 1.02 m 2.04 m 3.06 m 4.08 m 5.10 m 41P~76P(DS700)-GB 2004.9.16 1:54 PM Page 55
57 Setting the Audio Quality You can adjust the balance and level for each speaker. 21 43 In Stop mode, press MENU button.Press Cursor button to move to ‘Audio’ and then press ENTERbutton. Press Cursor button to move to ‘SOUND EDIT’ and then press ENTERbutton.Press Cursor , , , buttons to select the desired item and then press ENTERbutton. Method 1When adjusting the audio quality using the setup screen Press RETURNbutton to return to the previous level. Press MENUbutton to exit the setup screen. 41P~76P(DS700)-GB 2004.9.16 1:54 PM Page 56
Adjusting Front/Rear Speaker Balance •You can select between 00 and –06 and OFF. •The volume decreases as you move closer to –6. Adjusting Center/Rear/Subwoofer Speaker Level •The volume level can be adjusted in steps from +6dB to –6dB. •The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB. Method 2When manually adjusting with the SOUND EDIT button 21 Adjusting Front Speaker BalanceAdjusting Rear Speaker Balance Press SOUND EDITbutton and then press Cursor , . 3 Adjusting Center Speaker Level 45 Adjusting Rear Speaker LevelAdjusting Subwoofer Speaker Level 58 Press SOUND EDITbutton and then press Cursor , .Press SOUND EDITbutton and then press Cursor , . Press SOUND EDITbutton and then press Cursor , .Press SOUND EDITbutton and then press Cursor , . Note SETUP TITLECHAPPRGM RDS RTSTTUNED kHzMHz TITLECHAPPRGM RDS RTSTTUNED kHzMHz TITLECHAPPRGM RDS RTSTTUNED kHzMHz TITLECHAPPRGM RDS RTSTTUNED kHzMHz TITLECHAPPRGM RDS RTSTTUNED kHzMHz 41P~76P(DS700)-GB 2004.9.16 1:54 PM Page 57
59 Setting the DRC (Dynamic Range Compression) You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night. 12 In Stop mode, press MENUbutton.Press Cursor button to move to ‘Audio’ and then press ENTERbutton. •The Cursor button is pressed, the greater the effect, and the Cursor button is pressed, the smaller the effect. 34 Press Cursor button to move to ‘DRC’ and then press ENTERbutton.Press Cursor , to adjust the ‘DRC’. Press RETURNbutton to return to the previous level. Press MENUbutton to exit the setup screen. 41P~76P(DS700)-GB 2004.9.16 1:54 PM Page 58