Samsung Ht Ds490 Instruction Manual

							4
•Enter the old password, a new
password, and confirm new password.
•The setting is complete.
35
Press RETURN button to return to the previous level.
Press  MENU button to exit the setup screen.
50
Press Cursor      button to
move to ‘PASSWORD’
and then press  ENTER
button.
Press  ENTER
button. Enter the password
and then press
ENTER
button.
SETUP
 43P~78P(DS490)-GB  9/16/04 1:38 PM  Page 47
 
						

							51
Setting the Wallpaper
While watching a DVD, VCD or JPEG CD, you can set the image you like as \
background wallpaper.
DVDVCDJPEG
•“COPY LOGO DATA” will be
displayed on the TV screen.
•The selected wallpaper will be
displayed.•You can repeat Steps 1 and 2 to
set up to 3 wallpapers.
21
43
During playback, press
PLAY/PAUSE button
when the image you
like comes up.Press  LOGO
button.
Press  OPEN/
CLOSE to close
the disc tray.The power will turn off
and then back on and
the disc tray will open
automatically.
PAUSE COPY LOGO DATA
Setting the Wallpaper
Select this to set the
Samsung Logo image as
your wallpaper.Select this to set the desired
image as your wallpaper.
 
43P~78P(DS490)-GB  9/16/04 1:38 PM  Page 48
 
						

							52
SETUP
213
In Stop mode,
press MENU
button.Press Cursor
button to move to
‘Setup’ and then
press  ENTER button. Press Cursor
button to move to
‘LOGO’ and then
press 
ENTER button.
To Change the Wallpaper
54
Press  MENU
button to exit the
setup screen.Press      to select
the desired ‘USER’,
and then press
ENTER .
Press RETURN button to return to the previous level.
Press  MENU button to exit the setup screen.
 43P~78P(DS490)-GB  9/16/04 1:38 PM  Page 49
 
						

							21
Press the MENU
button while the
disc tray is open.Press Cursor
button to move to
‘Setup’ and then
press  ENTER button.
43
Press RETURN button to return to the previous level.
Press  MENU button to exit the setup screen.
53
Press Cursor
button to move to
‘DVD TYPE’ and then
press ENTER button.Press Cursor     ,
button to move to
‘DVD VIDEO’ and then
press ENTER button.
DVD Playback Mode
•DVD Play mode is set to DVD
Audio as factory default setting.
Note
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit t\
o DVD-Video mode.
•Set steps 1 ~ 4 again if you want to
switch to DVD AUDIO Play mode. 
When Selecting DVD Play Mode:
•DVD VIDEO : set to play the DVD video
contents contained in DVD
audio disc.
•DVD AUDIO : set to play the default DVD
audio.
  43P~78P(DS490)-GB  9/16/04 1:38 PM  Page 50
 
						

							54
SETUP
:
eoVD
DVD
AV  SYNC Setup
Press  RETURN button to return to the previous level.
Press  MENU button to exit the setup screen.
•Audio menu appears.
21
•Setup menu appears.
•AV-SYNC screen appears.
3
Press Cursor     ,     buttons
to move to ‘Audio’ and then 
press ENTER button.
Press Cursor     ,      buttons
to move to ‘AV-SYNC’ and
then press  ENTERbutton.
Press the 
MENUbutton.
4
•You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
Press Cursor      ,     buttons
to select the Delay Time of
AV-SYNC and then press the
ENTER button.
Video may look slower than the audio if it is connected with digital TV.\
 
In this case, adjust the delay time of audio to optimal status to fit th\
e video.
 43P~78P(DS490)-GB  9/16/04 1:38 PM  Page 51
 
						

							21
43
Setting the Speaker Mode
Signal outputs and frequency responses from the speakers will automatica\
lly be adjusted
according to your speaker configuration and whether certain speakers are\
 used or not.
In Stop mode,
press MENU
button.Press Cursor
button to move to
‘Audio’ and then
press  ENTER button.
In the Speaker
Setup, press the
ENTERbutton again. Press Cursor     ,     , 
,    buttons to move
to the desired
speaker and then
press  ENTER button.
•For C, LS, and RS, each time the button
is pressed, the mode switches
alternately as follows: SMALL  ➝ NONE.
•For L and R, the mode is set to SMALL.
55
SMALL: Select this when using the speakers.
NONE : Select this when no speakers are installed.
•Depending on PRO LOGIC and STEREO, the speaker mode may vary.
Note
 43P~78P(DS490)-GB  9/16/04 1:38 PM  Page 52
 
						

							Setting the Test Tone
Press the Test Tone to check the speaker connections and to adjust the s\
peaker levels.
L: Front Speaker (L) C: Center Speaker SW: Subwoofer 
R: Front Speaker (R) LS: Rear Speaker (L) RS: Rear Speaker (R)
Press RETURN button to return to the previous level.
Press  MENU button to exit the setup screen.
56
SETUP
21
In Stop mode,
press MENU
button.Press Cursor
button to move to
‘Audio’ and then
press  ENTER button.
3
Press Cursor      button
to move to ‘TEST
TONE’ and then press
ENTER button.
•The test tone will be sent to L  ➝ C ➝
R  ➝  RS  ➝ LS  ➝ SW in that order. 
If the ENTER button is pressed again
at this time, the test tone will stop.
To  end the test tone, 
press  TEST TONE button.
Press TEST TONE button.
•Test tone will be produced as follows:
When playing a DVD or CD, this will work 
only in Stop mode.
•Use this function to check that each speaker is
correctly connected and that there is no problem.
When manually testing using the  TEST TONEbutton
Multi-Channel Pro Logic Mode
Start
 43P~78P(DS490)-GB  9/16/04 1:38 PM  Page 53
 
						

							Setting the Delay Time
If the speakers cannot be placed at equal distances from the listening p\
osition, you can adjust the
delay time of the audio signals from the center and rear speakers.
57
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening position at different times depending on the
placement of speakers, you can adjust this difference by adding a delay
effect to the sound of the Center Speaker and Surround Speakers.
21
In Stop mode,
press MENU
button.Press Cursor     button
to move to ‘Audio’ and
then press  ENTER
button.
•With           (Dolby Pro Logic II), the delay time may be different f\
or each mode.
•With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.
Note
  43P~78P(DS490)-GB  9/16/04 1:38 PM  Page 54
 
						

							58
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SURROUND SPEAKER
Ideal CENTER
SPEAKER placement
It is desirable to place all speakers within this circle. Ideal
SURROUND
SPEAKER
placement
SETUP
•You can set the delay time for C
between 00 and 05mSEC and for
LS and RS between 00 and
15mSEC.
435
Press Cursor      button
to move to ‘DELAY
TIME’ and then press
ENTER
button.Press Cursor     ,     , 
,    buttons to move
to the desired
speaker and then
press  ENTER button.
Press Cursor     ,
to set the Delay
time.
0 ms
3 ms 
6 ms
9 ms
12 ms
15 ms
• Setting REAR (SURROUND) SPEAKERS
If the distance of Df is equal to the distance of Ds
in the figure, set the mode as 0ms. Otherwise,
change the setting according to the table.
• 
Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than the
distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance between Df and Dc  Delay Time
Delay Time
0 ms
1 ms 
2 ms
3 ms
4 ms
5 ms
Distance between Df and Ds
0.00 m 
0.34 m
0.68 m
1.02 m
1.36 m
1.70 m
0.00 m 
1.02 m
2.04 m
3.06 m
4.08 m
5.10 m
  43P~78P(DS490)-GB  9/16/04 1:38 PM  Page 55
 
						

							59
Setting the Audio Quality
You can adjust the balance and level for each speaker.
21
43
In Stop mode,
press MENU
button.Press Cursor     
button to move to
‘Audio’ and then press
ENTER button.
Press Cursor      button
to move to ‘SOUND
EDIT’ and then press
ENTER button.Press Cursor      ,      , 
,      buttons to select
the desired item and then
press  ENTER button.
Method 1When adjusting the audio quality using the setup screen
Press RETURN button to return to the previous level.
Press  MENU button to exit the setup screen.
 43P~78P(DS490)-GB  9/16/04 1:38 PM  Page 56