Samsung Ht Ds490 Instruction Manual

							20
CONNECTIONS
The cooling fan dissipates the heat generated inside the unit so that th\
e unit can be operated
normally. The cooling fan is activated automatically to supply cool air to the uni\
t.
Please observe the following cautions for your safety.
•Make sure the unit is well-ventilated. If the unit has poor ventilation,\
 the temperature inside the unit could rise
and may damage it.
•Do not obstruct the cooling fan or ventilation holes. (If the cooling f\
an or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may resul\
t.)
Cooling Fan
FM antenna connection
AM antenna connection
1. Connect the FM antenna supplied to the FM 75ΩCOAXIAL terminal as a temporary
measure.
2. Slowly move the antenna wire around until you find a location where r\
eception is good, then fasten it to a wall or other rigid surface.
• If reception is poor, connect an outdoor antenna. 
Before attaching a 75 Ωcoaxial cable (with a standard type connector), disconnect the supplie\
d FM antenna.
1. Connect the AM loop antenna supplied to the AM and       terminals.
2. If reception is poor, connect an outdoor single vinyl-covered wire to the AM terminal.
(Keep the AM loop antenna connected).
 
						

							21
Before Using Your DVD Player
Your DVD player is capable of playing DVD, VCD, CD, MP3 and JPEG discs.De\
pending on the disc
you are using, these instructions may vary slightly. Read the instructions carefully before using.
1
Plug the power cord into the
AC power supply.
4
Press  TV/VIDEO button to
select VIDEO mode.
 
						

							22
•Each time the button is pressed, the TV indicator (red) and the DVD Receiver indicator (green) will flash\
 alternately.
•You can operate the TV while the TV indicator is flashing and the DVD player while the DVD indicator is f\
lashing.
•Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO and Numeric (0-9) buttons.
•By default, the remote control is set to work with Samsung TVs.
See page 71 for more information on the operation of the remote control.\
Press  MODE button.
To Operate the TV and DVD Player with a Single Remote Control
23
Press the  MODEbutton so
that the TV indicator on the
remote control flashes.
TVDVD RECEIVER
TVDVD RECEIVER
Press the  POWERbutton to
turn on the TV.
56
Press the  MODEbutton so that
the DVD RECEIVER indicator
on the remote control flashes.Press  DVDbutton to select
DVD/CD mode.
CONNECTIONS
 
						

							Disc Playback
•Depending on the content of the disc, the initial screen may
appear different.
•Depending on the recording mode, some MP3-CDs cannot
be played.
•Table of contents of a MP3-CD varies depending on the
MP3 track format recorded on the disc.
•To  resume playback, press  PLAY/PAUSE(         )
button again.
1
Press  OPEN/CLOSE button to
open the disc tray.
2
Load a disc.
3
Press  OPEN/CLOSE button
to close the disc tray.
To  temporarily pause playback, 
press  PLAY/PAUSE during playback.
DVDVCDCD
•Playback starts automatically.
•Place a disc gently into the tray with the
disc’s label facing up.
•If pressed once, “ PRESS PLAY” is displayed and the
stop position will be stored in memory. If  PLAY/PAUSE
(         ) button or  ENTERbutton is pressed, playback
resumes from the stop position. (This function works
only with DVDs.)
•If pressed twice, “STOP” is displayed, and if
PLAY/PAUSE (         ) button is pressed, playback
starts from the beginning.
To  stop playback, 
press  STOP during playback.
Note
23
 
						

							•In this manual, the instructions marked with DVD (               ) a\
re applicable
to DVD-VIDEO, DVD-AUDIO, and DVD-R/RW discs.
Where a particular DVD type is mentioned, it is indicated separately.
•Depending on the content of the disc, the initial screen may appear different.
DVDNote
Groups and tracks (DVD-AUDIO)
•DVD-audios are divided into several large sections called groups and s\
maller
sections called tracks. Numbers are allotted to these sections. 
These numbers are called group numbers and track numbers.
GROUP 1 GROUP 2
TRACK 1 TRACK 2 TRACK 1 TRACK 2TRACK 3
Titles and chapters (DVD-VIDEO)
•DVD-videos are divided into several large sections called titles and s\
maller
sections called chapters. Numbers are allotted to these sections. 
These numbers are called title numbers and chapter numbers.
TITLE 1 TITLE 2
CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2 CHAPTER 3
Tracks (Video and music CDs)
•V ideo and music CDs are divided into sections called tracks. 
Numbers are allotted to these sections. These numbers are called track numbers.
TRACK 1 TRACK 2 TRACK 4 TRACK 5 TRACK 3
Disc terminology
24
CONNECTIONS
 
						

							Checking the Remaining Time
Each time the REMAIN button is pressed 
Press the REMAIN button.
•For checking the total and remaining time of a title or chapter
being played.
25
CHAPTER REMAIN
TITLE REMAIN
CHAPTER ELAPSED TITLE ELAPSED
DVD-
VIDEO
TRACK REMAIN
GROUP REMAIN
TRACK ELAPSED
GROUP ELAPSED
DVD-
AUDIO
CDVCD
TRACK REMAIN
TO TAL ELAPSED
TO TAL REMAIN
TRACK ELAPSED
MP3
TRACK ELAPSED
TRACK REMAIN
 
						

							26
CONNECTIONS
•Depending on the recording mode, some MP3-CDs may not play.
•Table of contents of a MP3-CD varies depending on the MP3 track format
recorded on the disc.Note
MP3-CD Playback
Data CDs (CD-ROM, CD-R, CD-RW) encoded in MP3 format can be played.
2
In Stop mode, use      to select
the album, and then
press the  ENTER
button.
•The MP3 menu screen will appear
and playback will start.
•Depending on the MP3 disc, the
appearance of the menu may be
different.
1
Press the
OPEN/CLOSE button
to open the disc tray,
and then load the
MP3 disc.
4
Press the  STOP
button to stop
playback.
•To  select another album and track,
repeat Steps 2 and 3 above.
3
To  change the album,
use                    to
select another album
in Stop mode, and
then press the
ENTER button.
 
 
						

							JPEG File Playback
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored
on a CD and then played back with this DVD player.
Slide Mode
JPEG
27
Place the JPEG disc on the disc tray.
•Each time the button is pressed, the slide moves backward or forward.
Press                   to skip to the next slide.
1
•Playback starts automatically.
•Each image is shown for 5 seconds before another image is displayed.
Press the OPEN/CLOSE button.2
•Playback starts automatically.
•Each time the button is pressed, the image makes the transition as follo\
ws:
Press SLIDE MODE button.3
From top to bottom
From bottom to top
Rectangular shape in the center
Vertical curtain shape
Each time a new image is displayed, slide modes
(1~11) will be applied randomly and automatically.
Cancels the slide mode.
 
						

							Rotate/Flip Function
button: Flip Verticallybutton: Flip Horizontally
button: Rotate 90°
Counterclockwisebutton: Rotate 90° Clockwise
Digest Function
2
Press Cursor     ,    ,    ,    buttons 
to select the desired image and
then press  ENTERbutton.
1
Press DIGEST
button during
playback.
•JPEG files will be shown in  
9 windows. Y
ou can view 9 JPEG images on the TV screen.•The selected image is played for 5 seconds before moving
to the next image.
28
To  view the previous or next image with 9 windows, press               .
Press Cursor     ,    ,    ,     buttons during playback.
Original Image
OPERATION
 
						

							Fast playback
DivX Playback
Skip Forward/Back
During playback, press the              button.
•Go to the next file whenever you press           button, if there are ov\
er 
2 files in the disk. 
•Go to the previous file whenever you press           button, if there ar\
e over 
2 files in the disk. 
Press and hold                button. 
•Each time the button is held down during playback, 
the playback speed changes as follows:
29
•DIVX file can be zoomed
only in ZOOM X2 mode. Note
Zoom Function
2
Press Cursor    ,    ,    ,    buttons to
move to the area
you want to enlarge.
1Press  ZOOM
button.
•Each time you press the button,
your selection will toggle between
“ ZOOM X2 ” and “ZOOM OFF ”.