Samsung Ht Ds490 Instruction Manual
Here you can view all the pages of manual Samsung Ht Ds490 Instruction Manual. The Samsung manuals for Home Theater System are available online for free. You can easily download all the documents as PDF.
Page 51
4 •Enter the old password, a new password, and confirm new password. •The setting is complete. 35 Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. 50 Press Cursor button to move to ‘PASSWORD’ and then press ENTER button. Press ENTER button. Enter the password and then press ENTER button. SETUP 43P~78P(DS490)-GB 9/16/04 1:38 PM Page 47
Page 52
![Page 52
51
Setting the Wallpaper
While watching a DVD, VCD or JPEG CD, you can set the image you like as \
background wallpaper.
DVDVCDJPEG
•“COPY LOGO DATA” will be
displayed on the TV screen.
•The selected wallpaper will be
displayed.•You can repeat Steps 1 and 2 to
set up to 3 wallpapers.
21
43
During playback, press
PLAY/PAUSE button
when the image you
like comes up.Press LOGO
button.
Press OPEN/
CLOSE to close
the disc tray.The power will turn off
and then back on and
the disc tray will open...](http://img.usermanuals.tech/thumb/66/53293/w300_samsung_ht-ds490-instruction-manual-51.png "Page 52
51
Setting the Wallpaper
While watching a DVD, VCD or JPEG CD, you can set the image you like as \
background wallpaper.
DVDVCDJPEG
•“COPY LOGO DATA” will be
displayed on the TV screen.
•The selected wallpaper will be
displayed.•You can repeat Steps 1 and 2 to
set up to 3 wallpapers.
21
43
During playback, press
PLAY/PAUSE button
when the image you
like comes up.Press LOGO
button.
Press OPEN/
CLOSE to close
the disc tray.The power will turn off
and then back on and
the disc tray will open...")
51 Setting the Wallpaper While watching a DVD, VCD or JPEG CD, you can set the image you like as \ background wallpaper. DVDVCDJPEG •“COPY LOGO DATA” will be displayed on the TV screen. •The selected wallpaper will be displayed.•You can repeat Steps 1 and 2 to set up to 3 wallpapers. 21 43 During playback, press PLAY/PAUSE button when the image you like comes up.Press LOGO button. Press OPEN/ CLOSE to close the disc tray.The power will turn off and then back on and the disc tray will open...
Page 53
52 SETUP 213 In Stop mode, press MENU button.Press Cursor button to move to ‘Setup’ and then press ENTER button. Press Cursor button to move to ‘LOGO’ and then press ENTER button. To Change the Wallpaper 54 Press MENU button to exit the setup screen.Press to select the desired ‘USER’, and then press ENTER . Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. 43P~78P(DS490)-GB 9/16/04 1:38 PM Page 49
Page 54
21 Press the MENU button while the disc tray is open.Press Cursor button to move to ‘Setup’ and then press ENTER button. 43 Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. 53 Press Cursor button to move to ‘DVD TYPE’ and then press ENTER button.Press Cursor , button to move to ‘DVD VIDEO’ and then press ENTER button. DVD Playback Mode •DVD Play mode is set to DVD Audio as factory default setting. Note Some DVD-Audio discs contain DVD-Video as well as...
Page 55
54 SETUP : eoVD DVD AV SYNC Setup Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. •Audio menu appears. 21 •Setup menu appears. •AV-SYNC screen appears. 3 Press Cursor , buttons to move to ‘Audio’ and then press ENTER button. Press Cursor , buttons to move to ‘AV-SYNC’ and then press ENTERbutton. Press the MENUbutton. 4 •You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status. Press Cursor ,...
Page 56
![Page 56
21
43
Setting the Speaker Mode
Signal outputs and frequency responses from the speakers will automatica\
lly be adjusted
according to your speaker configuration and whether certain speakers are\
used or not.
In Stop mode,
press MENU
button.Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
In the Speaker
Setup, press the
ENTERbutton again. Press Cursor , ,
, buttons to move
to the desired
speaker and then
press ENTER button.
•For C, LS, and RS, each time the button
is...](http://img.usermanuals.tech/thumb/66/53293/w300_samsung_ht-ds490-instruction-manual-55.png "Page 56
21
43
Setting the Speaker Mode
Signal outputs and frequency responses from the speakers will automatica\
lly be adjusted
according to your speaker configuration and whether certain speakers are\
used or not.
In Stop mode,
press MENU
button.Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
In the Speaker
Setup, press the
ENTERbutton again. Press Cursor , ,
, buttons to move
to the desired
speaker and then
press ENTER button.
•For C, LS, and RS, each time the button
is...")
21 43 Setting the Speaker Mode Signal outputs and frequency responses from the speakers will automatica\ lly be adjusted according to your speaker configuration and whether certain speakers are\ used or not. In Stop mode, press MENU button.Press Cursor button to move to ‘Audio’ and then press ENTER button. In the Speaker Setup, press the ENTERbutton again. Press Cursor , , , buttons to move to the desired speaker and then press ENTER button. •For C, LS, and RS, each time the button is...
Page 57
![Page 57
Setting the Test Tone
Press the Test Tone to check the speaker connections and to adjust the s\
peaker levels.
L: Front Speaker (L) C: Center Speaker SW: Subwoofer
R: Front Speaker (R) LS: Rear Speaker (L) RS: Rear Speaker (R)
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
56
SETUP
21
In Stop mode,
press MENU
button.Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
3
Press Cursor button
to move to ‘TEST
TONE’ and then press
ENTER...](http://img.usermanuals.tech/thumb/66/53293/w300_samsung_ht-ds490-instruction-manual-56.png "Page 57
Setting the Test Tone
Press the Test Tone to check the speaker connections and to adjust the s\
peaker levels.
L: Front Speaker (L) C: Center Speaker SW: Subwoofer
R: Front Speaker (R) LS: Rear Speaker (L) RS: Rear Speaker (R)
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
56
SETUP
21
In Stop mode,
press MENU
button.Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
3
Press Cursor button
to move to ‘TEST
TONE’ and then press
ENTER...")
Setting the Test Tone Press the Test Tone to check the speaker connections and to adjust the s\ peaker levels. L: Front Speaker (L) C: Center Speaker SW: Subwoofer R: Front Speaker (R) LS: Rear Speaker (L) RS: Rear Speaker (R) Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. 56 SETUP 21 In Stop mode, press MENU button.Press Cursor button to move to ‘Audio’ and then press ENTER button. 3 Press Cursor button to move to ‘TEST TONE’ and then press ENTER...
Page 58
![Page 58
Setting the Delay Time
If the speakers cannot be placed at equal distances from the listening p\
osition, you can adjust the
delay time of the audio signals from the center and rear speakers.
57
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening position at different times depending on the
placement of speakers, you can adjust this difference by adding a...](http://img.usermanuals.tech/thumb/66/53293/w300_samsung_ht-ds490-instruction-manual-57.png "Page 58
Setting the Delay Time
If the speakers cannot be placed at equal distances from the listening p\
osition, you can adjust the
delay time of the audio signals from the center and rear speakers.
57
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening position at different times depending on the
placement of speakers, you can adjust this difference by adding a...")
Setting the Delay Time If the speakers cannot be placed at equal distances from the listening p\ osition, you can adjust the delay time of the audio signals from the center and rear speakers. 57 Setting up the Speaker Delay Time When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a...
Page 59
58 Df: The distance from FRONT SPEAKER Dc: The distance from CENTER SPEAKER Ds: The distance from SURROUND SPEAKER Ideal CENTER SPEAKER placement It is desirable to place all speakers within this circle. Ideal SURROUND SPEAKER placement SETUP •You can set the delay time for C between 00 and 05mSEC and for LS and RS between 00 and 15mSEC. 435 Press Cursor button to move to ‘DELAY TIME’ and then press ENTER button.Press Cursor , , , buttons to move to the desired speaker and then press...
Page 60
59 Setting the Audio Quality You can adjust the balance and level for each speaker. 21 43 In Stop mode, press MENU button.Press Cursor button to move to ‘Audio’ and then press ENTER button. Press Cursor button to move to ‘SOUND EDIT’ and then press ENTER button.Press Cursor , , , buttons to select the desired item and then press ENTER button. Method 1When adjusting the audio quality using the setup screen Press RETURN button to return to the previous level. Press MENU button...