Samsung Ht Ds460 Instruction Manual

60
Dolby Pro Logic II Effect
This function works only in Dolby Pro Logic MUSIC mode.
12
•You can select between 0 and 7.•You can select between 0 and 6.
34
•PANORAMA: This mode extends the front stereo image to include the surround speakers for
an exciting wraparound effect with side wall imaging.
•CENTER WIDTH: Sound is output to the center speaker only. The front left and right speakers
produce phantom sound. 
•DIMENSION: Incrementally adjusts the sound field (DSP) from the front or rear.
•When playing...

61
Setting the RRSS(Rear Reflecting Surround System)
• By setting up the RRSS function just once, the speaker distance, channel level, and rear sound
reflection effect are automatically set and create an optimal listening environment. 
• This function works only in DVD/CD mode.
21
43
Connect the RRSS
Microphone to the
RRSS input jack.Place the RRSS
Microphone at the
listening position.
Press the RRSS
button.
When REMOVE MIC
appears on the display,
disconnect the RRSS
Microphone.
• The RRSS button works...

62
SETUP
•If the system is installed at a location where sound cannot
be reflected (e.g., an open space without walls), the speaker
distance, channel level, and rear sound reflection effect may
be set incorrectly during the RRSS setup.
Caution
*This drawing is provided for illustration
purposes only and the actual appearance
of the items depicted may vary.
L: Front Speaker (L) R: Front Speaker (R)
C: Center Speaker  SW: Subwoofer
LS: Rear Speaker (L) RS: Rear Speaker (R)
Sound field optimization...

63
Rear Reflecting Surround System
You can enjoy realistic sound reproduction that approximates 5.1-channel surround
sound using the front speakers.
21
Press the RRSSbutton
to select REAR
REFLECTING ON.
•The rear sound reflection function
will be enabled and you can enjoy
the 5.1-channel surround sound.
To cancel the rear
sound reflection
function, press the
RRSSbutton again to
select REAR
REFLECTING OFF.
What is RRSS?
(RRSS: Rear Reflecting Surround System)
•The sound from the front/rear speakers, which...

Live Surround Mode 
You can use the magic sound field to listen to 2-channel stereo sources in realistic
5.1-channel surround sound.
12
3
•CINEMA: A powerful sound field effect as in a movie theater.
•STADIUM: A sound field effect of being at a soccer or baseball game.
•LIVE: A sound field effect with a spatial feeling as in a live concert hall.
•JAZZ: Select this when listening to jazz.
•ROCK: Select this when listening to rock music.
•CLASSIC: Select this when listening to classical music.
•DISCO: A...

65
SURROUND PLUS / Virtual Headphone
The Surround Plus function works when the headphone is not connected, and the
Magic Headphone function works when the headphone is connected.
SURROUND PLUS
Enable the Surround plus function if you have installed the system at a location where sound cannot be reflected.
You can create a virtual rear sound image to enjoy realistic sound reproduction that approximates 5.1-channel surround sound.
(When you enable this function, the center speaker does not produce sound...

66
SUPER 5.1
12
Press the SUPER 5.1
button to select
SUPER 5.1.To cancel this
function, press the
SUPER 5.1button to
select SUPER OFF.
SETUP
•If you insert a DVD recorded in more than 2 channels and press the
SUPER 5.1 button, THIS FUNCTION APPLIES ONLY 2CH SOURCE
will appear on the display and the function will not work.
Note
•A 2-channel source will be reproduced
in 5.1 channel.
You can reproduce 2-channel sources, such as VCDs, CDs, and radio broadcasts,
in realistic 5.1-channel surround sound....

67
Listening to Radio
You can listen to the chosen band (FM, AM broadcast stations) by using either
the automatic or manual tuning operation.
21
• The selection toggles back
and forth between FM
➝ AM
each time the TUNER(BAND)
button is pressed.
Tune in to the
desired station.Press TUNER/
BANDbutton.
Automatic Tuning 2
Manual Tuning
21
Select a broadcast
station.
Press the STOP(   )
button to select
PRESET and then press
button to select the preset station.Automatic Tuning 1
Press the Function
button to...

68
Presetting Stations
To tune in to a preset station, press                on the 
remote control to select a channel.
•Refer to Step 2 on page 63 to
automatically or manually tune in
to a station.
21
•Each time the button is pressed,
the band switches between 
FM
➝ AM.
•“PRGM” flashes in the
display. Tune in to a station.
3
Example: Presetting FM 89.1 in the memory 
Press             to
select 89.10. Press the
TUNER(BAND)
button  and select
the FM band.
•Press the TUNER MEMORYbutton before
‘PRGM’...

About RDS broadcasting
• RDS is not available for AM broadcasts.
• RDS may not operate correctly if the station tuned is not transmitting
RDS signal properly or if the signal strength is weak.
• If searching finishes at once,“PS”,and “RT” will not appear on the display.
Using the RDS (Radio Data System) to receive FM stations
What information can RDS signals provide?
RDS allows FM stations to send an additional signal along with their regular program signals. For
example,the stations send their station...