Samsung Ht Ds460 Instruction Manual

50
AV SYNC Setup
Press RETURNbutton to return to the previous level.
Press MENUbutton to exit the setup screen.
•Audio menu appears.
21
•Setup menu appears.
•AV-SYNC screen appears.
3
Press Cursor     ,     buttons
to move to ‘Audio’ and then 
press ENTERbutton.
Press Cursor     ,      buttons
to move to ‘AV-SYNC’ and
then press ENTERbutton. Press the MENUbutton.
4
•You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
Press Cursor      ,     buttons
to select the Delay...

21
43
Setting the Speaker Mode
Signal outputs and frequency responses from the speakers will automatically be adjusted
according to your speaker configuration and whether certain speakers are used or not.
In Stop mode,
press MENU
button.Press Cursor
button to move to
‘Audio’ and then
press ENTERbutton.
In the Speaker
Setup, press the
ENTERbutton again.Press Cursor     ,     , 
,    buttons to move
to the desired
speaker and then
press ENTERbutton.
•For C, LS, and RS, each time the button
is pressed, the...

Setting the Test Tone
Press the Test Tone to check the speaker connections and to adjust the speaker levels.
L: Front Speaker (L) C: Center Speaker SW: Subwoofer 
R: Front Speaker (R) LS: Rear Speaker (L) RS: Rear Speaker (R)
Press RETURNbutton to return to the previous level.
Press MENUbutton to exit the setup screen.
52
SETUP
21
In Stop mode,
press MENU
button.Press Cursor
button to move to
‘Audio’ and then
press ENTERbutton.
3
Press Cursor      button
to move to ‘TEST
TONE’ and then press...

Setting the Delay Time
If the speakers cannot be placed at equal distances from the listening position, you can adjust the
delay time of the audio signals from the center and rear speakers.
53
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening position at different times depending on the
placement of speakers, you can adjust this difference by adding a delay...

54
SETUP
•You can set the delay time for C
between 00 and 05mSEC and for
LS and RS between 00 and
15mSEC.
435
Press Cursor      button
to move to ‘DELAY
TIME’ and then press
ENTERbutton.Press Cursor     ,     , 
,    buttons to move
to the desired
speaker and then
press ENTERbutton.
Press Cursor     ,
to set the Delay
time.
0 ms
3 ms 
6 ms
9 ms
12 ms
15 ms
• Setting REAR (SURROUND) SPEAKERS
If the distance of Df is equal to the distance of Ds
in the figure, set the mode as 0ms. Otherwise,
change the...

55
Setting the Audio Quality
You can adjust the balance and level for each speaker.
21
43
In Stop mode,
press MENU
button.Press Cursor     
button to move to
‘Audio’ and then press
ENTERbutton.
Press Cursor      button
to move to ‘SOUND
EDIT’ and then press
ENTERbutton.Press Cursor      ,      , 
,      buttons to select
the desired item and then
press ENTERbutton.
Method 1When adjusting the audio quality using the setup screen
Press RETURNbutton to return to the previous level.
Press MENUbutton to exit...

Adjusting Front/Rear Speaker Balance
•You can select between 00 and –06 and OFF.
•The volume decreases as you move closer to –6.
Adjusting Center/Rear/Subwoofer Speaker Level
•The volume level can be adjusted in steps from +6dB to –6dB.
•The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
Method 2When manually adjusting with the SOUND EDIT button
21
Adjusting Front Speaker BalanceAdjusting Rear Speaker Balance
Press SOUND
EDITbutton and
then press Cursor    
,     .
3...

57
Setting the DRC (Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at
low volume at night.
12Press MENU
button.
Press Cursor
button to move to
‘Audio’ and then
press ENTER
button.
 41P~76P(DS460)-GB  2004.9.16  11:04 AM  Page 58
 

SETUP
58
34
Press Cursor
button to move to
‘DRC’ and then
press ENTER
button.Press Cursor     
,     to adjust
the ‘DRC’.
Press RETURNbutton to return to the previous level.
Press MENUbutton to exit the setup screen.
•The more times the Cursor      button is
pressed, the greater the effect, and the
more times Cursor      button is pressed,
the smaller the effect.
 41P~76P(DS460)-GB  2004.9.16  11:04 AM  Page 59
 

59
Dolby Pro Logic II Mode
You can select the desired Dolby Pro Logic II audio mode.
Press       PL II MODEbutton.
PRO LOGIC II
•MUSIC: When listening to music, you can experience sound effects as if you are listening to the actual performance.
•CINEMA: Adds realism to the movie soundtrack.
•PRO LOGIC: You will experience a realistic multi-channel effect, as if using five speakers, while using just the front left
and right speakers.
•MATRIX: You will hear 5.1 channel surround sound.
STEREO: Select this...