Samsung Ht Db760 Instruction Manual

							50
•The longer the Cursor      button is held
down, the greater the effect, and the
longer Cursor      button is held down,
the smaller the effect.
34
Press Cursor
button to move to
‘DRC’ and then
press ENTER
button.Press Cursor     
,     to adjust
the ‘DRC’.
Press RETURNbutton to return to the previous level.
Press MENUbutton to exit the setup screen.
SETUP
 33P~72P(DB760)-GB  1/5/04 9:59 AM  Page 49
 
						

							51
Dolby Pro Logic II Mode
You can select the desired Dolby Pro Logic II audio mode.
DSPCMXLINEAR PCM
MPEG-2 AACMPEGLCRSWLSRS
TITLE PBCCHAPPRGM RDS RTTA TUNEDkHzMHzST
DSPCMXLINEAR PCM
MPEG-2 AACMPEGLCRSWLSRS
TITLE PBCCHAPPRGM RDS RTTA TUNEDkHzMHzST
DSPCMXLINEAR PCM
MPEG-2 AACMPEGLCRSWLSRS
TITLE PBCCHAPPRGM RDS RTTA TUNEDkHzMHzST
DSPCMXLINEAR PCM
MPEG-2 AACMPEGLCRSWLSRS
TITLE PBCCHAPPRGM RDS RTTA TUNEDkHzMHzST
DSPCMXLINEAR PCM
MPEG-2 AACMPEGLCRSWLSRS
TITLE PBCCHAPPRGM RDS RTTA TUNEDkHzMHzST
DSPCMXLINEAR PCM
MPEG-2 AACMPEGLCRSWLSRS
TITLE PBCCHAPPRGM RDS RTTA TUNEDkHzMHzST
S
PRO LOGIC II
•MUSIC: When listening to music, you can experience sound effects as if you are listening to the
actual performance.
•CINEMA: Adds realism to the movie soundtrack.
•PRO LOGIC: You will experience a realistic multi-channel effect, as if using five speakers, while
using just the front left and right speakers.
•MATRIX: You will hear 5.1 channel surround sound.
STEREO: Select this to listen to sounds from the front left and right speakers and the
subwoofer only.
Press       PL II MODEbutton.
•Each time the button is pressed, the mode changes as follows.
•When selecting Pro Logic II mode, connect your external device to the
AUDIO INPUT jacks (L and R) on the player. If you connect to only one of
the inputs (L or R), you cannot listen to 5.1 channel surround sound.Note
 33P~72P(DB760)-GB  1/5/04 9:59 AM  Page 50
 
						

							52
Dolby Pro Logic II Effect
This function works only in Dolby Pro Logic MUSIC mode.
12
•You can select between 0 and 7.•You can select between 0 and 6.
34
•PANORAMA: This mode extends the front stereo image to include the surround speakers for an exciting
wraparound effect with side wall imaging.
•CENTER WIDTH: Sound is output to the center speaker only. The front left and right speakers produce phantom
sound. 
•DIMENSION: Incrementally adjusts the sound field (DSP) from the front or rear.
•When playing a DVD disc encoded with two or more channels, multi-channel mode will be selected
automatically and                 (Dolby Pro Logic II) button does not work.
•You can select either 0 or 1.
Press        PL II MODE
button to select ‘MUSIC’
mode.Press PL II EFFECT button
and then press Cursor      ,
buttons to select the mode.
DSP
CMX
LINEAR PCM
MPEG-2 AACMPEGLCRSWLSRS
TITLE PBCCHAPPRGM RDS RTTA TUNED
kHzMHz
STDSP
CMX
LINEAR PCM
MPEG-2 AACMPEGLCRSWLSRS
TITLE PBCCHAPPRGM RDS RTTA TUNED
kHzMHz
ST
DSP
CMX
LINEAR PCM
MPEG-2 AACMPEGLCRSWLSRS
TITLE PBCCHAPPRGM RDS RTTA TUNED
kHz
MHz
STDSP
CMX
LINEAR PCM
MPEG-2 AACMPEGLCRSWLSRS
TITLE PBCCHAPPRGM RDS RTTA TUNED
kHz
MHz
ST
Press PL II EFFECT button
and then press Cursor      ,
buttons to select the mode.
Press PL II EFFECT button
and then press Cursor      ,
buttons to select the mode.
Note
SETUP
Manufactured under license from Dolby Laboratories. “Dolby,”
“Pro Logic,” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished Works. ©1992–1997
Dolby Laboratories, Inc. All rights reserved.Manufactured under license from Digital Theater Systems, Inc.
US Pat. No. 5,451,942 and other world-wide patents issued
and pending. “DTS” and “DTS Digital Surround” are
trademarks of Digital Theater Systems, Inc. ©1996 Digital
Theater Systems, Inc. All rights reserved.
 33P~72P(DB760)-GB  1/5/04 9:59 AM  Page 51
 
						

							53
Setting the RRSS(Rear Reflecting Surround System)
• By setting up the RRSS function just once, the speaker distance, channel level, and rear sound
reflection effect are automatically set and create an optimal listening environment. 
• This function works only in DVD/CD mode.
21
43
Connect the RRSS
Microphone to the
RRSS input jack.Place the RRSS
Microphone at the
listening position.
Press the RRSS
button.
When REMOVE MIC
appears on the display,
disconnect the RRSS
Microphone.
• The RRSS button works as the RRSS setup function shown above if the RRSS Microphone is connected, and works as the rear sound
reflection effect function if the microphone is removed.
• If you are installing the system for the first time or if you have initialized the system, NO MEASURED DATA will appear on the display
when you press the RRSS button without connecting the RRSS Microphone.
• During the RRSS setup, the output volume of the tone is fixed and you cannot use the volume control buttons to adjust the output level.
• If you remove the RRSS Microphone during the RRSS setup, the setup will be cancelled.
• Place the front and left speakers (L/R) toward the side walls so that the rear speaker sound is reflected against the walls.
Note
• A speaker tone will be heard once
from each speaker in the order of 
L ➝ C ➝ R ➝ RS ➝ LS ➝ SW, and
then the newly set error tone will be
heard again from L ➝ R.
• An optimal listening environment will
be set up automatically.
• It takes about 3 to 4 minutes to
complete the RRSS setup.
Tone Output
A piano sound will be heard and the
setup will be completed.
 33P~72P(DB760)-GB  1/5/04 9:59 AM  Page 52
 
						

							54
SETUP
•If the system is installed at a location where sound cannot
be reflected (e.g., an open space without walls), the speaker
distance, channel level, and rear sound reflection effect may
be set incorrectly during the RRSS setup.
Caution
*This drawing is provided for illustration
purposes only and the actual appearance
of the items depicted may vary.
L: Front Speaker (L) R: Front Speaker (R)
C: Center Speaker  SW: Subwoofer
LS: Rear Speaker (L) RS: Rear Speaker (R)
Sound field optimization
microphone
To select the RRSS that you have set
Briefly press the RRSSbutton.
(If you have set the RRSS for the first time according to
Steps 1 to 3 on the previous page)
•Your selection will toggle between REAR REFLECTING
ON and REAR REFLECTING OFF on the display.
•Select REAR REFLECTING ON to listen using the
RRSS setting and select REAR REFLECTING OFF to
listen to the disc currently being played in its original
setting.
To enable or disable the sound logo
When you turn on the power, a sound logo will be heard,
indicating that the disc reading is completed and the player is
in its optimal condition to play the disc.
1.Press and hold the RRSSbutton.
•S.LOGO ON or S.LOGO OFF appears on the
display.
2.Briefly press the RRSSbutton.
•Each time you press the button, your selection toggles
between S.LOGO ON and S.LOGO OFF.
•Select S.LOGO ON to enable the sound logo and
select S.LOGO OFF to disable the sound logo.
To check the RRSS that you have set
1.Press and hold the RRSSbutton twice.
•CHECK appears on the display.
2.Next,briefly press the RRSSbutton.
•The speaker distance and level value for each channel
will be displayed.
To cancel the RRSS setup
Press the RRSSbutton.
•The tone output stops, CANCEL appears on the
display, followed by REMOVE MIC, and then the
setup will be cancelled.
 33P~72P(DB760)-GB  1/5/04 9:59 AM  Page 53
 
						

							55
Rear Reflecting Surround System
You can enjoy realistic sound reproduction that approximates 5.1-channel surround
sound using the front speakers.
21
Press the RRSSbutton
to select REAR
REFLECTING ON.
•The rear sound reflection function
will be enabled and you can enjoy
the 5.1-channel surround sound.
To cancel the rear
sound reflection
function, press the
RRSSbutton again to
select REAR
REFLECTING OFF.
What is RRSS?
(RRSS: Rear Reflecting Surround System)
•The sound from the front/rear speakers, which are located in the front,
is first reflected against the side walls (or the ceiling) and then reflected
against the rear wall before reaching the listener.
It allows you to enjoy the realistic sound reproduction equal to that of a
5.1-channel speaker system using only 3 speakers.
•It not only increases space efficiency but eliminates the need for
speaker cable arrangement because it does not require installation of
rear speakers.
 33P~72P(DB760)-GB  1/5/04 9:59 AM  Page 54
 
						

							Live Surround Mode 
You can use the magic sound field to listen to 2-channel stereo sources in realistic
5.1-channel surround sound.
12
3
•CINEMA: A powerful sound field effect as in a movie theater.
•STADIUM: A sound field effect of being at a soccer or baseball game.
•LIVE: A sound field effect with a spatial feeling as in a live concert hall.
•JAZZ: Select this when listening to jazz.
•ROCK: Select this when listening to rock music.
•CLASSIC: Select this when listening to classical music.
•DISCO: A sound field with a powerful bass as in a disco club.
•SUPER 5.1: Select this to listen to a 2 channel source in 5.1 channel.
•LSM OFF: If you press the Live Surround Mode button on the main
unit, the mode display will appear on the display in the same order
as pressing the LSM + button on the remote control.
Play a Dolby Surround or
2-Channel disc, or listen
to the radio.Each time you press the LSM +
button, the mode display
changes in the order shown
below. Each time you press the
LSM – button, the mode display
changes in the reverse order.
To cancel the magic sound field
function, press and hold the
Live Surround Modebutton on
the main unit for longer than 1
second.
SETUP
•Depending on the disc being played, the effect of each
sound field may vary.
•You cannot select SUPER 5.1 mode when playing a
DVD disc recorded in more than 2 channels.
Note
56
 33P~72P(DB760)-GB  1/5/04 9:59 AM  Page 55
 
						

							57
SURROUND PLUS / Virtual Headphone
The Surround Plus function works when the headphone is not connected, and the
Magic Headphone function works when the headphone is connected.
SURROUND PLUS
Enable the Surround plus function if you have installed the system at a location where sound cannot be reflected.
You can create a virtual rear sound image to enjoy realistic sound reproduction that approximates 5.1-channel surround sound.
(When you enable this function, the center speaker does not produce sound and the disc will be reproduced in 4.1-channel.)
12
Press the SURR. PLUS
button to select the surround
plus function.To cancel the surround plus
function, press the 
SURR. PLUSbutton again.
•This function works only with DVDs recorded in more than 2 channels.
•The surround plus function does not work with 2-channel sources such as music CDs or MP3 CDs.
Note
Virtual Headphone
You can enjoy a realistic sound very similar to that of a 5.1-channel sound system using regular stereo headphones.
12
Press the V-H/Pbutton to
select VIRTUAL ON.To cancel this function,
press the 
V-H/Pbutton to
select VIRTUAL OFF.
•A realistic sound very similar to that of a 
5.1-channel sound system will be produced. 
•You can enjoy the feeling of being in the middle of
a concert hall using headphones.•You can listen in a regular 2-channel stereo. 
•You can listen in regular stereo.
 33P~72P(DB760)-GB  1/5/04 9:59 AM  Page 56
 
						

							58
SUPER 5.1
12
Press the SUPER 5.1
button to select
SUPER 5.1.To cancel this
function, press the
SUPER 5.1button to
select SUPER OFF.
SETUP
•If you insert a DVD recorded in more than 2 channels and press the
SUPER 5.1 button, THIS FUNCTION APPLIES ONLY 2CH SOURCE
will appear on the display and the function will not work.
Note
•A 2-channel source will be reproduced
in 5.1 channel.
You can reproduce 2-channel sources, such as VCDs, CDs, and radio broadcasts,
in realistic 5.1-channel surround sound.
 33P~72P(DB760)-GB  1/5/04 9:59 AM  Page 57
 
						

							59
Listening to Radio
You can listen to the chosen band (FM, MW, LW broadcast stations) by using
either the automatic or manual tuning operation.
21
• The selection toggles back
and forth between FM
➝ MW
➝ LW each time the
TUNER(BAND)button is
pressed.
Tune in to the
desired station.Press TUNER/
BANDbutton.
Automatic Tuning 2
Manual Tuning
21
Select a broadcast
station.
Press the STOP(   )
button to select
PRESET and then press
button to select the preset station.Automatic Tuning 1
Press the Function
button to select the
desired band (FM,
MW, LW).
Press the STOP(   ) button
to select MANUAL and
then press and hold                   button to
automatically search the band.Automatic Tuning 2
Press STOP(   ) to select
MANUAL and then briefly
press to tune in to a lower or
higher frequency.Manual Tuning
•Each time the button is pressed, the sound switches between STEREO and MONO.
•In a poor reception area, select MONO for a clear, interference-free broadcast.
Press MO/STbutton to listen in Mono/Stereo. 
(This applies only when listening to an FM station.)
When                is pressed, a
preset broadcast station is
selected.
Press and hold                 to
automatically search for
active broadcasting stations.
Briefly press                 to
increase or decrease the
frequency incrementally.Automatic Tuning 1
Remote Control Unit
Main Unit
 33P~72P(DB760)-GB  1/5/04 9:59 AM  Page 58