Samsung Ht Db760 Instruction Manual

60
Presetting Stations
To tune in to a preset station, press                on the 
remote control to select a channel.
•Refer to Step 2 on page 59 to
automatically or manually tune in
to a station.
21
•Each time the button is pressed,
the band switches between 
FM
➝ MW ➝ LW.
TITLECHAPPRGM RDS RTSTTUNED
kHzMHz
TITLECHAPPRGM RDS RTSTTUNED
kHzMHz
TITLERDS RTSTTUNED
kHzMHz
•“PRGM” flashes in the display. 
3
Example: Presetting FM 89.1 in the memory 
Press             to
select 89.10. Press the
TUNER(BAND)...

About RDS broadcasting
• RDS is not available for MW/LW broadcasts.
• RDS may not operate correctly if the station tuned is not transmitting
RDS signal properly or if the signal strength is weak.
• If searching finishes at once,“PS”,and “RT” will not appear on the display.
Using the RDS (Radio Data System) to receive FM stations
What information can RDS signals provide?
RDS allows FM stations to send an additional signal along with their regular program signals. For
example,the stations send their...

PTY (Program Type) indication and PTY-SEARCH function
62
To search for a program using the PTY codes
Before you start, remember...
• The PTY Search is only applicable to preset
stations.
• To stop searching any time during the process,
press PTY SEARCH while searching.
• There is a time limit in doing the following steps. 
If the setting is cancelled before you finish, start
from step 1 again.
• When pressing the buttons on the primary remote
control, make sure that you have selected the FM
station using...

63
Convenient Functions
•The remaining time before the DVD player will shut itself off is displayed.
•Pressing the button again changes the sleep time from what you have set
earlier.
To confirm the sleep timer setting, press SLEEPbutton.
• SLEEP will be displayed. Each time the button is pressed
the preset time changes as follows: 10 ➝ 20 ➝ 30 ➝ 60 ➝
90 ➝ 120 ➝ 150 ➝ OFF.
TITLECHAPPRGM RDS RTSTTUNED
kHzMHz
Press SLEEPbutton.
Sleep Timer Function
You can set the time that the DVD player will shut itself...

64
•Each time the button is press, the brightness changes as
follows: SLIGHTLY DARKDARKBRIGHT.
TITLECHAPPRGM RDS RTSTTUNED
kHzMHz
Adjusting Display Brightness
You can adjust the brightness of the display on the
main unit so it wont interfere with your movie viewing.
Press DIMMERbutton.
•‘MUTE’ flash in the display.
•To switch the sound back on (at the same volume as
before), press MUTEagain or the VOLUMEbuttons.
Mute Function
This is useful when answering a doorbell or
telephone call.
Press...

65
Operating the TV with the Remote Control
•The remote control may not work on some brands of TVs. Also some operations may not be
possible depending on your brand of TV.
•If you do not set the remote control with the code for your brand of TV, the remote control will
work on a Samsung TV by default.
When operating the TV with the remote control
1
Press the MODEbutton to make the TV
indicator on the remote control to flash.
2Press POWERbutton to turn on the TV.
3Point the remote control toward the TV....

66
MISCELLANEOUS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29SAMSUNG
ANAM
DAEWOO
LG
HITACHI
JVC
SHARP
SONY
TOSHIBA
SANYO
MITSUBISHI
MATSUSHITA
TELEFUNKEN
RCA
PANASONIC
SABA
PHILIPS
GRUNDIG
ZENITH
MIVAL
NOBLEX
EMERSON
MAGNAVOX
LOEWE
THOMSON
NORDMENDE
LOEWE OPTA
BLAUPUNKT
SIEMENS
TV Brand Code List
No.BrandCode
00(Initial Value), 01, 02, 03, 04, 05, 73
06~11, 59
12~18, 20, 21
05, 20, 21, 22, 53
23, 40, 41, 49
24, 55
27, 33, 34, 35, 54
27, 36
27, 37, 42, 43, 44, 46
27, 30,...

67
Before Calling for Service
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not
listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact
the nearest authorized dealer or Samsung Electronics Service Center.
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
• Check the region number of the DVD.
DVD discs purchased from abroad may not be...

68
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
• Is the remote control being operated within its operation range of
angle and distance?
• Are the batteries exhausted?
• Have you select the mode(TV/DVD) functions of the remote
control (TV or DVD) correctly?
The remote control does not
work.
• Audio language...

69
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
Do not keep in
direct sunlightKeep in a cool
ventilated areaKeep in a clean
Protection jacket.
Store vertically.
When you get fingerprints or dirt on the disc, clean it
with a mild detergent diluted in water and wipe with a
soft cloth.
• When cleaning, wipe gently from the inside to the outside of the disc.
Handling discs
Disc Storage
Handling...