Samsung Ht D5530k User Manual

English 31
03 Setup
TV Aspect
Depending on the type of television you have, you 
may want to adjust the screen size setting.
16:9 Original : Select when you connect the 
product to a 16:9 TV screen. The product will 
display all content in its original aspect ratio.
Content formatted in 4:3 will be displayed with 
black bars on the left and right.
16:9 Full : Select when you connect the product 
to a 16:9 TV screen. All content will fi ll the full 
screen. Content formatted in 4:3 will be stretched.
4:3...

32 English
Setup
Resolution according to the output mode
Blu-ray Disc/E-contents/Digital Contents playback
Output 
Setup HDMI / connected
HDMI / not connected
HDMI Mode Component/
VIDEO Mode Component Mode
VIDEO Mode
Blu-ray Disc E-contents/
Digital 
contents Blu-ray DiscE-contents/
Digital 
contents
BD Wise Resolution of 
Blu-ray Disc 1080p@60F 576i/480i
---
Auto Max. 
Resolution of  TV input Max. 
Resolution of  TV input 576i/480i
---
1080p@60F 1080p@60F 1080p@60F 576i/480i ---
Movie Frame :  Auto...

English 33
03 Setup
NOTE
If the TV you connected to the product does 
not support Movie Frame or the resolution you 
selected, the message “If no pictures are 
shown after the selection, please wait for 15 
seconds. And then, the resolution will be 
reverted to the previous value automatically. 
Would you like to make a selection?” appears.
If you select Yes, the TV’s screen will go blank 
for 15 seconds, and then the resolution will 
revert to the previous resolution automatically.
If the screen stays...

34 English
Setup
Distance
If the speakers cannot be placed at equal 
distances from the listening position, you can 
adjust the delay time of the audio signals from the 
front, centre, surround and subwoofer speakers.You can set the Speaker Distance between 
1ft(0.3m) and 30ft(9.0m).
SettingsDisplay
Audio
Network
System
Language
Security
General
SupportDistance
>
 Move    < Change    ' Return
Front L ◄   10(ft) 3.0(m)    |Front R  :  10(ft) 3.0(m)
Center : 10(ft) 3.0(m)
Surround L  :  10(ft) 3.0(m)...

English 35
03 Setup
Musical Auto Calibration 
By setting the Musical Auto Calibration (MAC) 
function just once when you relocate or install the 
product, you can have the product automatically 
recognize the distance between speakers, levels 
between channels, and frequency characteristics 
to create a 5.1-channel sound fi eld optimized for 
your environment.
ASC  IN
ASC IN50
5
00 mAASC
microphone
Musical Auto Calibration Mode
You will hear either the Musical Auto Calibration 
mode or the User Speaker...

36 English
Setup
HDMI Audio 
The audio signals transmitted over the HDMI 
Cable can be toggled On/Off.Off : Video is transmitted over the HDMI 
connection cable only, and audio is output 
through your product speakers only. 
On : 
Both video and audio signals are transmitted 
over the HDMI connection cable, and audio is 
output through your TV speakers only.
NOTE
HDMI Audio is automatically down-mixed to 
2ch for TV speakers.
Audio Return Channel
You can enjoy TV sound from the Home Cinema 
speakers by...

English 37
03 Setup
Digital Output Selection
SetupPCMBitstream 
(Unprocessed) Bitstream 
(Re-encoded  DTS) Bitstream
 (Re-encoded  Dolby D)
Connection HDMI supported 
AV receiver HDMI supported 
AV receiver HDMI supported 
AV receiver HDMI supported 
AV receiver
Audio Stream on Blu-ray Disc PCM
Up to 7.1ch PCM DTS re-encoded Re-encoded
Dolby Digital *
Dolby Digital Up to 7.1ch Dolby Digital DTS re-encoded Re-encoded
Dolby Digital *
Dolby Digital Plus Up to 7.1ch Dolby Digital Plus DTS re-encoded...

38 English
Setup
Audio Sync
Video may look slower than the audio when the 
product is connected to a digital TV. If this 
occurs, adjust the audio delay time to match the 
video.You can set the audio delay time between 
0 msec and 300 msec. Set it to the optimal 
status.
Network
Before you begin, contact your ISP to fi nd out if 
your IP address is static or dynamic. If it is 
dynamic, and you are using a wired or wireless 
connection, we recommend using the Auto 
procedures. If you are using a wireless...

English 39
03 Setup
To enter the Network settings into your product, 
follow these steps:Press the ▲▼ buttons to select  Wired, and 
then press the ENTER button.
Press the ◄► buttons to select  IP Settings, 
and then press the ENTER button.
SettingsDisplay
Audio
Network
System
Language
Security
General
SupportIP Settings
>
 Move   " Enter   ' Return
IP Mode  Manual
IP Address 0.0.0.0Subnet Mask 0.0.0.0Gateway 0.0.0.0DNS Mode  Manual
DNS Server 0.0.0.0OK
Press the ENTER button to select IP Mode....

40 English
Setup
On the Security screen, enter your network’s 
Pass Phrase. Enter numbers directly using 
your remote control. 
To select a letter, press the ▲▼◄► buttons 
to move the cursor, then press the ENTER 
button.
SettingsDisplay
Audio
Network
System
Language
Security
General
SupportNetwork Settings
a
 Previous    m Move    " Enter    ' Return
agmsa/A*DeleteSpaceDonetuvwxyz0nopqr789hijkl456bcdef123
Enter security key. 0 entered
NOTE
You should be able to fi nd the Pass Phrase on 
one of...