Samsung Ht C9950w User Manual

English 31
02 Connections
Connecting The Speakers
Press down the terminal tab on the back of the speaker. 
Insert the black wire into the black terminal (–) and the red wire \
into 
the red (+) terminal, and then release the tab.
Connect the connecting plugs to the back of the Subwoofer by 
matching the colors of the speaker plugs to the speaker jacks.
With the product turned off, insert the TX card into the TX Card 
Connection (WIRELESS) on the back of the Subwoofer.Hold the TX card so that the label...

32 English
Connections
CAUTION
Before connecting the speakers, connect the main unit to the subwoofer u\
sing the system cable. 
See page 26.
Do not let children play with or near the speakers. They could get hurt \
if a speaker falls.
When connecting the speaker wires to the speakers, make sure that the po\
larity (+/ –) is correct.
   Keep the subwoofer speaker out of reach children to prevent them from in\
serting their hands or 
alien substances into the duct (hole) of the subwoofer speaker.
   Do...

English 33
02 Connections
Connecting External Devices to Your TV via HDMI
HDMI is a standard digital interface for connection to such devices as a\
 TV, projector, DVD player, Blu-ray 
player, set top box and more.
HDMI removes any loss of signal from analog conversion, enabling you to \
enjoy video and audio sound 
quality as it was originally created in the digital source.
HDMI OUT : Connecting to a TV with an HDMI Cable
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the bac\
k of the...

34 English
Connections
HDMI Auto Detection Function
The product's video output automatically changes to HDMI mode when conne\
cted to a TV or other
device with an HDMI cable while the power is on.Auto Detection is not available if the HDMI cable does not support CEC.
HDMI connection description- HDMI outputs only a pure digital signal to the TV.
-  If your TV does not support HDCP, random noise appears on the screen.
What is the HDCP?
HDCP (High-band width Digital Content Protection) is a system for...

English 35
02 Connections
Connecting Audio from External Components
OPTICAL : Connecting an External Digital Component
For components with digital optical audio signals such as a Cable Box/Sa\
tellite receiver (Set-Top Box).Connect the Digital Input (OPTICAL) on the product to the Digital Audi\
o Output of the external 
digital component using a digital optical cable.
  Press the FUNCTION button to select D.IN input.
The mode switches as follows : BD/DVD   D. IN  AUX  iPod   HDMI1   HDMI2  TUNER...

36 English
Connections
Connecting to the Network
This product supports network based services (see pages 68~76), BD-LIV\
E, and on-line software 
upgrades through a network connection. We recommend you use an AP (Acce\
ss Point) or IP router for
the connection.
For more information on router connection, refer to the user manual of t\
he router or contact the router
manufacturer for technical assistance.
Cable Network
Using a Direct LAN Cable (UTP cable/not included), connect the LAN ter\
minal of the...

English 37
02 Connections
Wireless Network
You can connect the home thaeater to a network through a Wireless IP sha\
rer (either a router or modem).
Connect the suppplied wireless LAN adapter to the Wireless LAN Adapter j\
ack on the rear panel of 
the product.
- This unit is compatible with the supplied Wireless LAN Adapter.
Set the network options. (See page 49)
NOTE
You must use a wireless IP sharer (router or modem) that supports IEEE\
 802.11 a/b/g/n. We 
recommend using IEEE 802.11n for stable...

38 English
Setup
Before Starting (Initial Settings)
Turn on your TV after connecting the product.
When the product is connected to TV for the fi rst 
time, the product turns on automatically and 
displays the Initial Settings screen.
 > Move s Select
Initial Settings I On-Screen Language
Select a language for the on-screen displays.
English
Français
Deutsch
Español
Italiano
Nederlands
Press the ▲▼ buttons to select the desired 
language, and then press the  ENTER button.
Press the  ENTER button to select...

English 39
03 Setup
If you want to display Initial Settings screen 
again in order to make changes, press the 
STOP ( ) button on the front panel of the 
product for more than 5 seconds with no disc 
inserted.
Use the HDMI cable to connect the product to 
an  Anynet+ (HDMI-CEC) -compliant Samsung TV.
If the TV uses a language supported by the 
product, that language will be set to a 
preferred language automatically.
However, the  Anynet+ (HDMI-CEC)  feature 
should be set to  On in both the TV and the...

40 English
Setup
Display
You can confi gure various display options such 
as the TV Aspect Ratio, Resolution, 3D, etc.
3D
Select whether to play a Blu-ray Disc with 3D 
contents in 3D Mode.
DisplayAudio
System
Network
Language
Security
General
Support
Settings 
3D
Still Mode  : Auto
3D Mode  : Auto
TV Screen Size :      55    inch
 > Move s Select  r Return
3D
3D Mode
Auto : The 3D Blu-ray Disc is played in the 3D 
mode if your product detects a TV which 
supports 3D. It is played in 2D mode if your...