Samsung Ht C7550w User Manual

0 English
English 1

03
Setup

Display
You  can  confi gure  various  display  options  such  as the TV Aspect, Resolution, etc. 
tv aspect
Depending  on  the  type  of  television  you  have,  you may want to adjust the screen setting.
16:9 Normal•
Certain  movies(4:3  source) w i l l   b e   d i s p l a y e d   i n   4 : 3 Pillarbox (black bars on sides of  picture)  if  16:9  normal  is selected.
16:9 Wide•
You  can  view  the  full  16:9 picture  on  your  widescreen TV.
4:3 Letter Box•...

 English

Setup

English 

Resolution according to the output mode
Blu-ray Disc playback
Output Setup
HDMI / connectedHDMI / not connected
HDMI ModeComponent/VIDEO ModeComponent ModeVIDEO Mode
AutoOptimal Resolution576i(480i)--
1080p, Movie Frame(24Fs) off1080p@60F576i(480i)--
1080p/1080i, Movie Frame(24Fs) on1080p@24F576i(480i)--
1080i, Movie Frame(24Fs) off1080i576i(480i)1080i576i(480i)
720p720p576i(480i)720p576i(480i)
576p(480p)576p(480p)576i(480i)576p(480p)576i(480i)...

 English
English 

03
Setup

HDMI Format
You can optimize the colour setting from the 
HDMI output. Select a connected device Type.
tv : Select if connected to a TV via HDMI. 
m
onitor
 : Select if connected to a Monitor via 
HDMI.
NOTE
A TV or monitor has to be connected to the 
product before you select this option.
Movie Frame (24 Fs)
Setting the Movie Frame (24Fs) feature to On
allows you to adjust the product's HDMI output to
24 frames per second for improved picture...

 English

Setup

English 

Distance
If the speakers cannot be placed at equal 
distances from the listening position, you can 
adjust the delay time of the audio signals from the 
front, centre, surround and subwoofer speakers.
You can set the Speaker Distance between 
1ft(0.3m) and 30ft(9.0m).
DisplayAudioSystemNetworkLanguageSecurityGeneralSupport
Settings DistanceFront L   :  10ft (3.0m) |Front R  :   10ft (3.0m)Center  :  10ft (3.0m)Surround L  :  10ft (3.0m)Surround R  :  10ft...

 English
English 

03
Setup

Musical Auto Calibration 
By setting the Musical Auto Calibration (MAC) 
function just once when you relocate or install the 
product, you can have the product automatically 
recognize the distance between speakers, levels 
between channels, and frequency characteristics 
to create a 5.1-channel sound field optimized for 
your environment.
Musical Auto Calibration
You will hear either the Musical Auto Calibration 
mode or the User Speaker Settings.
Off:...

 English

Setup

English 

Digital Output
Set Digital output depending on the connected 
receiver. (For more details, please refer to the 
digital output selection.) 
PCM
Bistream(Re-encode)
Bistream(Audiophile)
Blu-ray Discs may include three audio streams.
-  Primary Audio : The audio soundtrack of the 
main feature.
-  Secondary Audio : Additional soundtrack 
such as director or actor's commentary.
-  Interactive Audio : Interactive sounds will be 
heard when selected....

 English
English 

03
Setup

Dynamic Range Control
You can listen at low volumes but still hear dialog 
clearly. This is only active when a Dolby Digital 
signal is detected. 
Off : You can enjoy the movie with the 
standard Dynamic Range. 
On : When Movie soundtracks are played at 
low volume or from smaller speakers, the 
system can apply appropriate compression to 
make low-level content more intelligible and 
prevent dramatic passages from getting too 
loud.
AV Sync
Video may...

 English

Setup

English 

Description of Device(Storage) Information on 
the Product
Total Size : Total size of the Device (Storage).
Available Size : Available size of the Device (Storage).
NOTE
In the external memory mode, disc playback 
will be stopped if you disconnect the USB 
device in the middle of the playback.
Only those USB devices formatted in FAT fi le 
system (DOS 8.3 volume label) are supported, 
and it is recommended to use USB devices 
that support USB 2.0 protocol,...

 English
English 

03
Setup

network Setup
To begin setting up the network connection for 
your product, follow these steps:
In the Home menu, press the ◄► buttons to 
select the Settings, and then press the 
ENTER button.
Press the ▲▼ buttons to select Network, 
and then press the ENTER button.
Press the ▲▼ buttons to select Network 
Settings, and then press the ENTER button.
Press the ▲▼ buttons to select Network 
Type, and then press the ENTER button.
Press the ▲▼ buttons to...

0 English

Setup

English 1

DisplayAudioSystemNetworkLanguageSecurityGeneralSupport
Settings 
On-Screen Menu  :Disc Menu  :Audio :Subtitle  :
Network SettingsInternet Protocol Setup  : Manual \IP Address  : 0 0 0 0 Subnet Mask  : 255 255 255 0 Gateway  : 0 0 0 0 DNS    : ManualDNS Server  : 0 0 0 0 
 > Move " Select ' Return
Use the number buttons on your remote to 
enter numbers.
When done with each fi eld, use the ► 
button to move successively to the next 
fi eld.
You can also use...