Samsung Ht C7550w User Manual

0 English
English 1

02
Connections

 NOTE
 If you place a speaker near your TV set, screen colour may be distorted because of the magnetic fi eld generated by the 
speaker. If this occurs, place the speaker away from your TV set.
✎

CAUTION
Do not let children play with or near the speakers. They could get hurt if a speaker falls.
When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.
  Keep the subwoofer speaker out of reach of children so as to...

 English

Connections

English 

Connecting the Speakers
NOTE
Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is 
too close to the product, some sound interruption may be heard due to interference.
If you use a device such as a microwave oven, wireless LAN Card or any other device that uses 
the same frequency (2.4/5.8GHz) near the product, some sound interruption may be heard due 
to interference.
The transmission distance...

 English
English 

02
Connections

Connecting external Devices/your tv via HDmI
HDMI is a standard digital interface for connection to such devices as a TV, projector, DVD player, Blu-ray 
player, set top box and more.
HDMI removes any loss of signal from analogue conversion, enabling you to enjoy video and audio sound 
quality as it was originally created in the digital source.
HDMI OUT : Connecting to a TV with an HDMI Cable (BEST QUALITY)
Connect an HDMI cable from the HDMI OUT...

 English

Connections

English 

Connecting e xternal Devices/your  tv  via HD m I
HDMI IN : Connecting to an External Component with an HDMI Cable
Connect an HDMI cable  from the HDMI IN jack on the back of the product to the HDMI OUT jack on your 
digital devices.
Press the FUNCTION button to select HDMI 1 or HDMI 2 input. 
The mode switches as follows : BD/DVD ; D. IN ; AUX ; HDMI 1 ; HDMI 2 ; FM
HDMI Auto Detection Function
The product's video output will automatically change...

 English
English 

02
Connections

METHOD 1 : Component Video  (BETTER QUALITY)
If your television is equipped with Component Video inputs, connect a Component video cable (not supplied) from the Component Video Output (Pr, Pb and Y) Jacks on the back of the product to the Component Video Input Jacks on your TV.
 NOTE
You can select from a variety of resolution settings such as 1080i, 720p, 576p(480p) and 576i(480i), depending on the disc type. (See page 32)The actual resolution may...

 English

Connections

English 

Connecting audio from external Components
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital 
component.
 Press the FUNCTION button to select D.IN input.
The mode switches as follows : BD/DVD ; D. IN ; AUX ; HDMI 1 ; HDMI 2 ; FM
NOTE
To see video from your Cable Box/Satellite...

 English
English 

02
Connections

Connecting to the network
This product supports network based services (see pages 58~63), BD-LIVE and software upgrade 
under the network connection. It is recommended to use an AP (Access Point) or IP router.
For more information on router connection, refer to the user manual of the router or contact the router
manufacturer for technical assistance.
Cable Network
Using the Direct LAN Cable (UTP cable), connect the LAN terminal of the product to the...

 English

Connections
English 
Connecting to the network
Wireless Network
You can connect to the network with a Wireless IP sharer.
A wireless AP/IP router is required to make a wireless network connection. Connect the wireless
LAN adapter to the Wireless LAN Adapter on the rear panel of the product. 
- This unit is compatible with the supplied Wireless LAN Adapter.
-  You can also use the wireless network by connecting the Wireless LAN Adapter Gender to the 
Wireless LAN Adapter....

 English
English 

03
SetupBefore Starting (Initial settings)
Turn on your TV after connecting the product.(When the product is connected to TV for the fi rst time,  product  will turn on automatically and the 
Initial Settings screen will be displayed.)
 > Move s Select
Initial Settings I On-Screen Language
Select a language for the on-screen displays.
EnglishFrançaisDeutschEspañolItalianoNederlands
Press the ▲▼ buttons to select the desired language, then press the ENTER button....

0 English
English 1

If you want to display Initial Setting screen 
again in order to make changes, press the 
STOP (@) button on the front panel of the 
product for more than 5 seconds with no disc 
inserted.
Use the HDMI cable to connect the product to 
an Anynet+(HDMI-CEC)-compliant Samsung TV.
If the TV uses a language supported by the 
product, that language will be set to a 
preferred language automatically.
However, the Anynet+(HDMI-CEC) feature 
should be set to On in both TV and the...