Samsung Ht C5950 User Manual

							
English 41
03 Setup
Use the number buttons on your remote to 
enter numbers.
When done with each fi eld, use the ► 
button to move successively to the next 
fi eld.
You can also use the other arrow buttons to 
move up, down, and back.
Enter the IP Address , Subnet Mask , and 
Gateway  values.
Press the ▼ button to go to  DNS.
Press the ▼ button to go to the fi rst DNS 
entry fi eld.
Press the  RETURN button on your remote.
Run a Network Test to ensure the product 
has connected to your network (See page 
43).
Wireless Network
You can setup the wireless network three ways: Using PBC (WPS)
Using the Auto Network Search function.
Manually.
Each method is described below.
Setting Up the Wireless Network 
Connection - PBC (WPS)
The easiest way to set up the wireless network 
connection is using the PBC (WPS) function.
If your wireless router has a PBC (WPS) button, 
follow these steps:
In the Network Settings menu, press the 
▲▼ buttons to select  Network Settings, 
and then press the  ENTER button.
The Internet Protocol Setup screen appears.
Press the  RED(A) button on the remote 
control.
Press the  PBC (WPS)  button on your router 
within two minutes. Your product displays 
the Network Selection Screen, and 
automatically acquires all the network 
setting values it needs and connects to your 
network. When it is done, it displays an  OK 
button. Press the  ENTER button on your 
remote.
4.
5.
6.
7.
8.
9.
10.
•
•
•
1.
2.
3.After the network connection is set up, 
press the  RETURN button to exit the 
Network Setting screen.
Setting Up the Wireless Network 
Connection - Auto Network Search
Most wireless networks have an optional security 
system that requires devices that access the 
network to transmit an encrypted security code 
called an Access or Security Key. The Security Key 
is based on a Pass Phrase, typically a word or a 
series of letters and numbers of a specifi ed length 
you were asked to enter when you set up security 
for your wireless network. If you use this method 
of setting up the network connection, and have 
a Security Key for your wireless network, you will 
have to enter the Pass Phrase during the setup 
process.
Setting Up the Network Connection
To set up the wireless connection using Auto 
Network Search, follow these steps:
In the Network Settings menu, press the 
▲▼ buttons to select  Network Settings, 
and then press the  ENTER button.
The Internet Protocol Setup screen appears.
Press the ▲▼ buttons to select the 
Internet Protocol Setup , and then press 
the  ENTER  button.
Press the ▲▼ buttons to select  Auto or 
Manual , and then press the  ENTER button.
If you selected  Auto, press the ▲ button to 
go to  Select a network , and then press the 
ENTER  button.
The Network function searches for available 
wireless networks.
When done, it displays a list of the available 
networks.
Network SettingSelect a network  : Not Selected
Internet Protocol Setup  : Auto   
IP Address  : 0 0
 0
 0
 
Subnet Mask  :  0
 0
 0
 0
 
Gateway :  0
 0
 0
 0
 
DNS     : AutoDNS Server  :  0 0
 0
 0
 a PBC (WPS)     > Move     " Enter    ' Return
4.
 1.
2.
3.
4.
H T-C 5900_5950W _X SA_0504.in dd   4 1HT-C5900_5950W_XSA_0504.indd   412010-0 5-0 4     1 1:1 0:5 92010-05-04    11:10:59
 
						

							
42 English
Setup
In the list of networks, press the ▲▼ 
buttons to select a network, and then press 
the ENTER  button.
If the PIN/Security pop-up appears, go to 
Step 7. If the Network Connecting Screen 
appears, go to Step 11.
Press the ▲▼ buttons to select PIN or 
Security.
For most home networks, you would select 
Security (for Security Key).
On the Security screen, enter your network’s 
Pass Phrase.
NOTE
You should be able to fi nd the Pass Phrase 
on one of the set up screens you used to set 
up your router or modem.
  – 
 
     
 
   
 a  
 b
 
Network SettingSecurity Key
ABCDE FG
HI JKLMN
OPQRS T U VWX Y Z0~9Number
Lower case
Delete
space
0 entered
  
Move    " Select     ' Return
To enter the Pass Phrase, follow these 
general directions:
Press the number keys on your remote to 
enter numbers.
Use the arrow keys on your remote to 
move from button to button on the 
Security Key screen.
Pressing the  RED (A) button on the 
remote lets you change the text displayed 
on the buttons to lower case, upper case, 
numbers, or icons. To enter a letter or 
symbol, move the cursor to the letter or 
symbol, and then press the  ENTER 
button.
To delete the last letter or number you 
entered, press the  GREEN (B) button.
5.
6.
7.
8.
✎

9.
•
•
•
•
When done, press the  BLUE (D) button on 
your remote, and then press the  ENTER 
button.
Wait until the connection confi rmation 
message is displayed, and then press the 
ENTER  button. The Network Settings 
screen reappears.
To test the connection, press the ▼ button 
to select  Network Test , and then press the 
ENTER  button.
Setting Up the Wireless Network 
Connection - Manual
If the Auto Setting does not work, you need to 
enter the Network settng values manually.
To get the Network setting values from most 
Windows computers, follow these steps:
Right click the Network icon on the bottom 
right of the screen.
In the pop-up menu, click Status.
On the dialog that appears, click the 
Support tab.
On the Support tab, click the Details button. 
The Network settings are displayed.
To Enter the Network settings into your product, 
follow these steps: On the Internet Protocol Setup screen, 
press the  ENTER button.
Press the ▲▼ buttons to select  Manual, 
and then press the  ENTER button.
Press the ▼ button to go to the fi rst entry 
fi eld (IP Address).
Network SettingSelect a network  : Not Selected
Internet Protocol Setup  : Manual   
IP Address  :  0
 0
 0
 0
 
Subnet Mask  :  255
 255
 255
 0
 
Gateway :  0
 0
 0
 0
 
DNS     : Manual 
DNS Server  :  0
 0
 0
 0
 
a PBC (WPS)     > Move     " Enter    ' Return
Use the number buttons to enter numbers.
10.
11.
12.
1.
2.
3.
4.
1.
2.
3.
4.
HT-C 5900_5950W _X SA_0504.in dd   4 2HT-C5900_5950W_XSA_0504.indd   422010-0 5-0 4     1 1:1 0:5 92010-05-04    11:10:59
 
						

							
English 43
03 Setup
When done with each fi eld, use the ► 
button to move successively to the next 
fi eld.
You can also use the other arrow buttons to 
move up, down, and back.
Enter the IP Address , Subnet Mask , and 
Gateway  values.
Press the ▼ to go to  DNS.
Press the ▼ button to go to the fi rst DNS 
entry fi eld. Enter the numbers as above.
When done, press the ▲ button to return to 
Access Point Selection. Select the network, 
and then press the  ENTER button.
Go to Step 6 in the Automatic Wireless 
procedure above, and follow the directions 
from that point on.
Network Test
Use this menu to connect the wired network or 
check whether your network connection is 
working or not.
On-Screen Menu  :Disc Menu  :
Audio :
Subtitle :
Network TestMAC Address (00:00:00:00:00:00)IP Address,Subnet Mask,Gateway,DNS Server Gateway Ping
  Internet Service Test
The network confi guration (IP) is not valid. Check the 
network settings and enter a valid value before trying 
again.
r Return
Network Status
Check whether a connection to the network and 
the Internet have been established.
5.
6.
7.
8.
9.
10.BD-LIVE Internet Connection
Set whether to allow internet connection when 
BD-LIVE service is used. Allow (All)  : The Internet connection will be 
allowed for all BD-LIVE contents.
Allow (Valid Only)  : The Internet connection 
will be allowed only for BD-LIVE contents 
containing a valid certifi cate.
Prohibit  : No Internet connection will be 
allowed for any BD-LIVE content.
NOTE
What is a valid certifi  cate?
When the product uses BD-LIVE to send the 
disc data and request to the server to certify 
the disc, the server uses the transferred data 
to check if the disc is valid and sends the 
certifi cate back to the product.
The Internet connection may be restricted 
while you are using BD-LIVE contents.
Language
You can select the language you prefer for home 
menu, disc menu, etc.
On-Screen Menu  : Select the language for the 
on-screen displays.
Disc Menu  : Select the language for the disc 
menu displays.
Audio  : Select the language for disc audio.
Subtitle  : Select the language for disc subtitles.
NOTE
The selected language will only appear if it is 
supported on the disc.
•
•
•
✎


•
•
•
•
✎
H
T-C 5900_5950W _X SA_0504.in dd   4 3HT-C5900_5950W_XSA_0504.indd   432010-0 5-0 4     1 1:1 1:0 02010-05-04    11:11:00
 
						

							
44 English
Setup
Security
When you operate this menu for the fi rst time, 
password setup screen will be displayed. Enter 
the desired 4-digit password using the number 
buttons. (Default password is set to 0000.)
Parental Rating
This function works in conjunction with Blu-ray 
Disc/DVDs that have been assigned a rating, 
which helps you control the types of Blu-ray Disc/
DVDs that your family watches. 
Select the rating level you want to set. A larger 
number indicates that the program is intended for 
adult use only. For example, if you select up to 
Level 6, discs that contain Level 7, 8 will not play.
Display
Audio
System
Network
Language
SecurityGeneral
Support
Settings 
Parental RatingChange PasswordOff
8(Adults)
7
6
5
4
3
2
▼
Change Password
Change the 4-digit password used to access 
security functions.
Display
Audio
System
Network
Language
SecurityGeneral
Support
Settings 
Change Password
    Enter Pin  r Return
Enter the password
If you forgot your password
Remove the disc.
Press and hold the  STOP ( ) button on the 
front panel for 5 seconds or more.
All settings will revert to the factory settings.
NOTE
When the factory default settings are restored, all the 
user data stored in the BD data will be deleted.
1.
2.
✎

General
Background
Change the background theme of the menu screen.
Display
Audio
System
Network
Language
Security
GeneralSupport
Settings 
Parental Rating  :  Off
Change PasswordBackground
  > Move s Select  r Return
Skin 1Skin 2
Skin 3
Skin 4
Skin 5
Front Display
Change the brightness of the front panel.
Auto  : Dim during playback only.
Dim  : Dim the display window.
Bright  : Brighten the display window.
Power On/Off Sound
Play a melody when the product is turned on and 
off.
Off : Turn Power Sound Off.
On  : Turn Power Sound On.
•
•
•
•
•
HT-C 5900_5950W _X SA_0504.in dd   4 4HT-C5900_5950W_XSA_0504.indd   442010-0 5-0 4     1 1:1 1:0 12010-05-04    11:11:01
 
						

							
English 45
03 Setup
Support
Software Upgrade
This menu allows you to upgrade software for 
performance improvements or additional services. 
You can check the current software version, 
upgrade by internet and set the Auto upgrade 
notifi cation. If the product is properly connected to 
the network by cable or wirelessly, the product will 
automatically connect to our website each time it is 
turned on and download update fi les if any valid 
upgrade exists.
Display
Audio
System
Network
Language
Security
General
Support
Settings 
Software UpgradeDisc Menu  :
Audio :
Subtitle :Software UpgradeCurrent Version  : XXX-XXXXXXXXX
By Internet         |
Auto Upgrade Notifi cation : On
 > Move s Select  r Return
To select  By Internet , press the ENTER 
button.
A popup message will appear if an update is 
available.
If you select  Yes, the product will turn off 
automatically before restarting.
(Never turn it on manually.)
The update progress popup will appear. 
When the update is completed, the product 
will turn back off automatically.
Press the  POWER button to turn on the 
product.
NOTE
The Update will be completed when the 
product turns off after restarting. Press the 
POWER  button to turn on the updated product 
for your use. Never turn off or on the product 
manually during the update process.
Samsung Electronics shall take no legal 
responsibility for product malfunction caused an 
unstable internet connection or consumer 
negligence during software upgrade.
1.
2.
3.
4.
✎


You can update software in any of the two ways 
as follows: Software update is the same as in the 
By Internet  menu.
USB  : Visit www.samsung.com/bluraysupport, 
then download and store the latest software 
(RUF fi le) into the USB fl ash drive. Connect the 
USB fl ash drive to the USB port of the product 
(disc tray must be empty) to update the 
software, then follow the on-screen 
instructions.
CD  : Visit www.samsung.com/bluraysupport, 
download and write the latest software (RUF 
fi le) onto a disc. Insert and play the disc in the 
product to start the update, then follow the on-
screen instructions.
NOTE
Software upgrades using the USB Host jack 
must be performed with no disc inside.
If you want to cancel the upgrade in the 
process of downloading the upgrade data, 
press the  ENTER button.
When the system upgrade is done, check the 
software details in the software Upgrade 
menu.
Do not turn off the product during the System 
Upgrade, as it may cause the product to not 
work properly.
Do not use USB devices other than USB Flash 
Drives to do software upgrades when using 
the USB Host jack.
Contact Samsung
Provide contact information for assistance with 
your product.
•
•
✎





H T-C 5900_5950W _X SA_0504.in dd   4 5HT-C5900_5950W_XSA_0504.indd   452010-0 5-0 4     1 1:1 1:0 42010-05-04    11:11:04
 
						

							
46 English
Basic Functions
Playing a Disc
Playback
Press the OPEN/CLOSE  () button to open 
the disc tray.
Place a disc gently into the tray with the 
disc’s label facing up.
Press the  PLAY (► ) button or  OPEN/
CLOSE  ( ) button to close the disc tray.
Playback related buttons
PLAY ( ►) Starts playback. 
STOP  (  )
Stops playback.
If pressing the button once: 
The stop position will be 
memorized.
If pressing the button twice: 
The stop position will be not 
memorized.
(With some Blu-ray discs (BD-J), 
this function may not work.)
•
•
PAUSE  (  )Pauses playback.
NOTE
"Not Available" will appear when an invalid 
button is pressed.
1.
2.
3.
✎

Disc Structure
The contents of disc are usually divided as below.
Blu-ray Disc, DVD-VIDEO
title 1 title 2
chapter 1 chapter 2 chapter 1 chapter 2 chapter 3
Audio CD (CD-DA)
track 1 track 2 track 3 track 4 track 5
MP3, WMA, DivX, MKV and MP4
folder (group) 1 folder (group) 2
fi le 1 fi le 2 fi le 1 fi le 2 fi le 3
Using the Disc menu / Title menu / Popup menu
Using the Disc Menu     
hZ
During playback, press the  DISC 
MENU   button on the remote 
control.
Press the 
\b▼◄ ► buttons to make 
the desired selection, then press the 
ENTER  button.
NOTE
Depending on the disc, the menu items may 
differ and this menu may not be available.
•
•
•
1.
2.
✎

DISC MENU
H T-C 5900_5950W _X SA_0504.in dd   4 6HT-C5900_5950W_XSA_0504.indd   462010-0 5-0 4     1 1:1 1:0 52010-05-04    11:11:05
 
						

							
English 47
04 Basic Functions
Using the Title Menu     
Z
During playback, press the TITLE 
MENU  button on the remote 
control.
Press the 
\b▼◄ ► buttons to 
make the desired selection, then 
press the  ENTER button.
NOTE
Depending on the disc, the menu items may 
differ and this menu may not be available.
The Title Menu will only be displayed if there 
are at least two titles on the disc.
Playing the Title List   
z
During playback, press the  DISC 
MENU  or TITLE MENU  button.
Press the 
\b▼ buttons to select an 
entry you want to play from Title 
List, then press the  ENTER 
button.
Using the Popup Menu 
h
During playback, press the  POPUP 
button on the remote control.
Press the 
\b▼◄ ► buttons or 
ENTER  button to select the desired 
menu.
NOTE
Depending on the disc, the menu items may 
differ and this menu may not be available.
1.
2.
✎


1.
2.
1.
2.
✎

Using the Search and Skip Functions
During playback, you can search quickly through 
a chapter or track, and use the skip function to 
jump to the next selection.
Searching for a Desired Scene
hzZyx
During playback, press the  SEARCH ( ) 
button.
Each time you press the SEARCH () 
button, the playback speed will change as 
follows.
BD-ROM, 
BD-RE/-R, 
DVD-RW/-R, 
DVD+RW/+R, DVD-VIDEO )
 1 
 )
 2 
 )
 3 
 
)  4 
)
 5 
 )
 6 
 )
 7
(  1 
 (
 2 
 (
 3 
 
(  4 
(
 5 
 (
 6 
 (
 7
DivX, MKV, MP4 )
 1 
 )
 2 
 )
 3
(  1 
 (
 2 
 (
 3
To return to normal speed playback, press the 
PLAY  (► ) button.
NOTE
No sound is heard during search mode.
Skipping Chapters
hzZyx
During playback, press the  SKIP (#$ ) 
button.
If you press the  SKIP ($ ) button, it moves to 
the next chapter.
If you press the  SKIP (# ) button, it moves to 
the beginning of the chapter. One more press 
makes it move to the beginning of the previous 
chapter.
•
•
✎

•
TITLE MENU
POPUP
TITLE MENU
POPUP
DISC MENU
TITLE MENU
POPUP
H T-C 5900_5950W _X SA_0504.in dd   4 7HT-C5900_5950W_XSA_0504.indd   472010-0 5-0 4     1 1:1 1:0 62010-05-04    11:11:06
 
						

							
48 English
Basic Functions
Slow Motion Play/Step Motion Play
Slow Motion Play
hzZyx
In pause mode, press the SEARCH ( ) 
button.
If you press the  SEARCH ( ) button, the 
playback speed is reduced to
*  1/8  * 1/4  * 1/2
To return to normal speed playback, press the 
PLAY  (►  ) button.
NOTE
No sound is heard during slow mode.
Slow motion operates only in the forward 
direction.
Slow motion can not operate on DivX discs.
Step Motion Play
hzZyx
In pause mode, press the  PAUSE (  ) button.
Each time the  PAUSE (  ) button is pressed, a 
new frame will be appear.
To return to normal speed playback, press the 
PLAY  ( ►  ) button.
NOTE
No sound is heard during step mode. 
Step motion operates only in the forward 
direction.
Step motion can not operate on DivX discs.
Repeat Playback
Repeat the Title or Chapter
hzZy
Repeat the disc title or chapter.
During playback, press the  REPEAT 
button on the remote control.
Press the ▲▼ buttons to select 
Chapter  or Title , then press the 
ENTER  button.
•
•
✎



•
•
✎



1.
2.
Repeat   Off
To return to normal play, press the  REPEAT 
button again.
Press the ▲▼ buttons to select  Off, the 
press the  ENTER button.
NOTE
Depending on the disc, the Repeat function 
may not be available.
Repeat the Section
hzZy
During playback, press the  REPEAT 
button on the remote control.
Press the ▲▼ buttons to select 
REPEAT A-B .
Repeat   REPEAT A-B : Off           s Mark A 
Press the  ENTER button at the point where 
you want repeat play to start (A).
Press the  ENTER button at the point where 
you want repeat play to stop (B).
To return to normal play, press the  REPEAT 
button again.
Press the  ENTER button.
NOTE
If you set point (B) before 5 seconds has 
lapsed, the prohibition message will appear.
3.
4.
✎

1.
2.
3.
4.
5.
6.
✎

REPEAT
REPEAT
HT-C 5900_5950W _X SA_0504.in dd   4 8HT-C5900_5950W_XSA_0504.indd   482010-0 5-0 4     1 1:1 1:0 72010-05-04    11:11:07
 
						

							
English 49
04 Basic Functions
Using the TOOLS button
During playback, you can operate disc 
menu by pressing the 
TOOLS button.
TOOLS Menu Screen
Title : 1/1
Chapter  4/21
Playing Time  :  00:12:06
Repeat
Audio  :  1/7 ENG Multi CH
Subtitle : 1/6 ENG
Angle : 1/1
BONUSVIEW Video  :  Off
BONUSVIEW Audio :  0/1 Off
Picture Setting   Tools
   < Change  
" Select
NOTE
Depending on the disc, the TOOLS menu may 
differ.
Moving to a Desired Scene Directly
hzZy
During playback, press the  TOOLS button.
Press the ▲▼ buttons to select  Title, 
Chapter  or Playing Time .
Enter the desired  Title, Chapter  or Playing 
Time  using the number buttons, then press 
the  ENTER  button.
Selecting the Audio Language
hzZx
During playback, press the  TOOLS button.
Press the ▲▼ buttons to select  Audio.
Press the ◄► buttons to select the desired 
audio language.
NOTE
The ◄► indicator will not be displayed on the 
screen if the BONUSVIEW section does not 
contain any BONUSVIEW audio settings.
•
✎
▪
1.
2.
3.
1.
2.
3.
✎

Information about the primary / secondary 
mode will be also displayed if the Blu-ray Disc 
has a BONUSVIEW section.
Use the ◄► button to switch between 
primary and secondary audio modes.
This function depends on what audio 
languages are encoded on the disc and may 
not be available.
A Blu-ray Disc can contain up to 32 audio 
languages and a DVD up to 8.
Some Blu-ray Discs may allow you to select 
either the multi-channel LPCM or Dolby digital 
audio soundtrack in English.
Selecting the Subtitle Language
hZx
During playback, press the  TOOLS button.
Press the ▲▼ buttons to select  Subtitle.
Press the ◄► buttons to select the desired 
subtitle language.
NOTE
Depending on the Blu-ray Disc / DVD, you may 
be able to change the desired subtitle in the 
Disc Menu.
Press the  DISC MENU  button.
This function depends on what subtitles are 
encoded on the disc and may not be available 
on all Blu-ray Discs/DVDs.
A Blu-ray Disc can contain up to 255 subtitle 
languages and a DVD up to 32.
Information about the primary / secondary 
mode will also be displayed if the Blu-ray Disc 
has a BONUSVIEW section.
This function changes both the primary and 
secondary subtitles at the same time.
The total number of subtitles is the sum of the 
primary and secondary ones.




1.
2.
3.
✎






TOOLS
H T-C 5900_5950W _X SA_0504.in dd   4 9HT-C5900_5950W_XSA_0504.indd   492010-0 5-0 4     1 1:1 1:1 22010-05-04    11:11:12
 
						

							
50 English
Basic Functions
Caption Function
x
You must have some experience with video 
extraction and editing in order to use this 
feature properly.
To use the caption function, save the caption 
fi le (*.smi) in the same fi le name as that of the 
DivX media fi le (*.avi) within the same folder.
Example. Root Samsung_007CD1.avi
     Samsung_007CD1.smi
Up to 60 alphanumeric characters or 30 East Asian 
characters (2 byte characters such as Korean and 
Chinese) for the fi le name.
Changing the Camera Angle
hZ
When a Blu-ray Disc/DVD contains multiple 
angles of a particular scene, you can use the 
ANGLE function.
During playback, press the TOOLS button.
Press the ▲▼ buttons to select  Angle.
Press the ◄► buttons to select the desired 
Angle.
Selecting the Picture Setting
hzZy
This function enables you to adjust video quality 
when you are connected to a TV via HDMI.
During playback, press the  TOOLS button.
Press the ▲▼ buttons to select  Picture 
Setting , then press the  ENTER button.
Press the ◄► buttons to select the desired 
Picture Setting , then press the  ENTER 
button.
Dynamic  : Choose this setting to increase 
Sharpness.
Normal  : Choose this setting for most 
viewing applications.
Movie  : This is the best setting for watching 
movies.
•
•
•
1.
2.
3.
1.
2.
3. •
•
•
User  : The user can adjust the sharpness 
and noise reduction function respectively.
Setting the BONUSVIEW
h
The BONUSVIEW feature allows you to view 
additional content (such as commentaries) in a 
small screen window while the movie is playing.
This function is only available if the disc has the 
bonusview feature. 
Primary a audio/videoSecondary a audio/video
During playback, press the  TOOLS button.
Press the ▲▼ buttons to select  BONUSVIEW 
Video  or BONUSVIEW Audio .
Press the ◄► buttons to select the desired 
bonusview.
NOTE
If you switch from BONUSVIEW Video, 
BONUSVIEW Audio will change automatically 
in accordance with BONUSVIEW Video.
Tools
BONUSVIEW Video    Off 
BONUSVIEW Audio :  0/1 Off
Picture Setting   
   <
 Change  
" Select
•
1.
2.
3.
✎

H T-C 5900_5950W _X SA_0504.in dd   5 0HT-C5900_5950W_XSA_0504.indd   502010-0 5-0 4     1 1:1 1:1 62010-05-04    11:11:16