Samsung Ht C5900 User Manual

							
English 31
03 Setup
Resolution according to the output mode
Blu-ray Disc playback
Output 
Setup HDMI / connected HDMI / not connected
HDMI Mode
Component/VIDEO ModeComponent Mode VIDEO Mode
Auto Optimal Resolution 576i(480i) - -
1080p, Movie Frame(24Fs) off 1080p@60F 576i(480i) - - 1080p/1080i,
Movie Frame(24Fs) on 1080p@24F 576i(480i) - -
1080i, Movie Frame(24Fs) off 1080i 576i(480i) 1080i 576i(480i) 720p 720p 576i(480i) 720p 576i(480i)
576p(480p) 576p(480p) 576i(480i) 576p(480p) 576i(480i) 576i(480i) - - 576i(480i) 576i(480i)
DVD playback
Output 
Setup HDMI / connected HDMI / not connected
HDMI Mode
Component/VIDEO ModeComponent Mode VIDEO Mode
Auto Optimal Resolution 576i(480i) - -
1080p 1080p@60F 576i(480i) - - 1080i 1080i 576i(480i) 576p(480p) 576i(480i)720p 720p 576i(480i) 576p(480p) 576i(480i)
576p(480p) 576p(480p) 576i(480i) 576p(480p) 576i(480i) 576i(480i) - - 576i(480i) 576i(480i)
•
•
NOTE
If the connected TV does not support Movie 
Frame or the selected resolution, the message 
“If no pictures are shown after the selection, 
please wait for 15 seconds. And then, the 
resolution will be reverted to the previous value 
automatically. Would you like to make a 
selection?” will be displayed.
If you select  Yes and the resolution is not 
supported, the TV's screen will be blank. 
Please wait for 15 seconds and the resolution 
will be reverted to the previous value 
automatically.
If the screen is blank, press and hold the 
STOP  ( ) button on the front of the product 
for more than 5 seconds (no disc inserted). 
All settings are restored to the factory default. 
Follow the steps on the previous page to 
access each mode and select the Display 
Setup that your TV will support.
✎


When the factory default settings are restored, 
all the user data stored in the BD data will be 
deleted.
The Blu-ray Disc must have the 24 frame 
feature in order to use the Movie Frame (24Fs) 
mode.
If both HDMI and Component jacks are 
connected and you are currently viewing 
component output, there is a difference 
between resolution table and actual resolution 
depending on your TV.
If the HDMI Auto Detection feature does not 
work, you can't select the 1080p resolution or 
Movie Frame (24Fs).



H T-C 5900_E LS _0504.in dd   3 1HT-C5900_ELS_0504.indd   312010-0 5-0 4     1 1:0 5:1 62010-05-04    11:05:16
 
						

							
32 English
Setup
HDMI Format
You can optimize the colour setting from the 
HDMI output. Select a connected device Type.TV  : Select if connected to a TV via HDMI. 
Monitor  : Select if connected to a Monitor via 
HDMI.
NOTE
A TV or monitor has to be connected to the 
product before you select this option.
Movie Frame (24 Fs)
Setting the Movie Frame (24Fs) feature to On
allows you to adjust the product's HDMI output to
24 frames per second for improved picture quality.
You can enjoy the Movie Frame (24Fs) feature only
on a TV supporting this frame rate. This menu can
only be selected in 1080i or 1080p HDMI output
resolution modes.
Off   : Movie Frame (24Fs) functions will not 
work.
On   :  Movie Frame (24Fs) functions will work.
NOTE
Two types of frame rates may be included, 
depending on the disc: Movie material (24 
frame) and Video material (30 frame). When the 
setting switches between Movie (24 frame) and 
Video (30 frame), the screen may blink for a 
few seconds. 
If your TV does not support Movie Frame 
(24Fs) function, the pop-up message will be 
displayed.
•
•
✎

•
•
✎


Progressive Mode 
Set to improve picture quality when viewing DVDs.
Auto  : Select this to have the product 
automatically set the best picture for the DVD 
you're watching.
Video  : Select this for the best picture from 
Concert or TV show DVDs.
Still Mode
Set the type of picture shown when you pause 
DVD playback.
Auto : Automatically set the best still picture 
depending on the content.
Frame  : Select when pausing a scene with a 
little action.
Field  : Select when pausing a scene with a lot 
of action.
HDMI Deep Color
Set to output the picture from the HDMI OUT jack 
with Deep Colour or not. Deep Colour allows more 
accurate colour reproduction with deeper colour 
depth.
Auto : The picture will be output with Deep 
Colour to the connected TV which supports 
HDMI Deep Colour.
Off  : The picture will be output without Deep 
Colour.
•
•
•
•
•
•
•
H T-C 5900_E LS _0504.in dd   3 2HT-C5900_ELS_0504.indd   322010-0 5-0 4     1 1:0 5:1 72010-05-04    11:05:17
 
						

							
English 33
03 Setup
Distance
If the speakers cannot be placed at equal 
distances from the listening position, you can 
adjust the delay time of the audio signals from the 
front, centre, surround and subwoofer speakers.You can set the Speaker Distance between 
1ft(0.3m) and 30ft(9.0m).
DisplayAudioSystem
Network
Language
Security
General
Support
Settings DistanceFront L   : ◄ 10ft (3.0m)  |Front R  :   10ft (3.0m)
Center : 10ft (3.0m)
Surround L  :  10ft (3.0m)
Surround R  :  10ft (3.0m)
Subwoofer :  10ft (3.0m)
Test Tone  :    Off
   
						

							
34 English
Setup
Musical Auto Calibration 
By setting the Musical Auto Calibration (MAC) 
function just once when you relocate or install the 
product, you can have the product automatically 
recognize the distance between speakers, levels 
between channels, and frequency characteristics 
to create a 5.1-channel sound fi eld optimized for 
your environment.
ASC IN
ASC
microphone
Musical Auto Calibration
You will hear either the Musical Auto Calibration 
mode or the User Speaker Settings.
Off:  You will hear sound in the the Speaker 
Setting value.
On:  You will hear sound in the Musical Auto 
Calibration mode.
Musical Auto Calibration Setting
Plug the ASC microphone into the  ASC IN jack.
Place the ASC microphone at the listening position.
Musical Auto Calibration will be automatically 
set up in the following sequence:
Front Left  Center  Front Right  
Surround Right 
 Surround Left  
Subwoofer
Press the  RETURN button to cancel the 
Musical Auto Calibration Setting.
•
•
1.
2. •
•
NOTE
Setting the Musical Auto Calibration  
function takes about 3 minutes.
The Musical Auto Calibration setup can be made 
when there is no disc in the product.
If the ASC microphone is disconnected during the 
Musical Auto Calibration setup, the setup will be 
cancelled.
When the Musical Auto Calibration function is 
activated, the DSP, Dolby Pro Logic ll and SFE 
Mode will not work.
If the product is connected to external devices or 
other components (such as an iPod, AUX, D.IN), 
the Musical Auto Calibration Setup may not work 
properly.
EQ Optimizer
Set optimal EQ automatically depending on the 
region.Off  : Turn EQ Optimizer off.
On  : Turn EQ Optimizer on.
HDMI Audio 
The audio signals transmitted over the HDMI 
Cable can be toggled On/Off.
Off :  Video is transmitted over the HDMI 
connection cable only, and audio is output 
through your product speakers only. 
On :  Both video and audio signals are 
transmitted over the HDMI connection cable, 
and audio is output through your TV speakers 
only.
NOTE
HDMI Audio is automatically down-mixed to 
2ch for TV speakers.
✎





•
•
•
•
✎

H T-C 5900_E LS _0504.in dd   3 4HT-C5900_ELS_0504.indd   342010-0 5-0 4     1 1:0 5:1 92010-05-04    11:05:19
 
						

							
English 35
03 Setup
Digital Output
Set Digital output depending on the connected 
receiver. (For more details, please refer to the 
digital output selection) PCM
Bistream(Re-encode)
Bistream(Audiophile)
Blu-ray Discs may include three audio streams.
-   Primary Audio : The audio soundtrack of the 
main feature.
- 
  Secondary Audio : Additional soundtrack 
such as director or actor's commentary.
-   Interactive Audio : Interactive sounds will be 
heard when selected. Interactive Audio is 
different on each Blu-ray Disc.
•
•
•
NOTE
Be sure to select the correct Digital Output 
or you will hear no sound or a loud noise.
If the HDMI device (Receiver, TV) is not compatible 
with compressed formats (Dolby digital, DTS), the 
audio signal outputs as PCM.
Secondary and Effect audio will not be heard with 
regular DVDs.
Some Blu-ray Discs do not have Secondary and 
Effect audio.
This Digital Output setup does not effect the 
analogue (L/R) audio or HDMI audio output to 
your TV. 
It effects the optical and HDMI audio output when 
connected to a receiver.
If you play MPEG audio soundtracks, audio signal 
outputs PCM regardless of Digital Output 
Selections (PCM or Bitstream).
✎






Digital Output Selection
Setup PCM Bitstream 
(Re-encode) Bitstream
(Audiophile)
Connection HDMI Receiver Optical HDMI Receiver or Optical HDMI Receiver Optical
Audio Stream 
on Blu-ray Disc PCM Up to 7.1ch PCM 2ch DTS re-encoded PCM PCM 2ch
Dolby Digital Up to 5.1ch PCM 2ch DTS re-encoded Dolby Digital Dolby Digital
Dolby Digital  Plus Up to 7.1ch PCM 2ch DTS re-encoded Dolby Digital Plus Dolby Digital
Dolby TrueHD Up to 7.1ch PCM 2ch DTS re-encoded Dolby TrueHD Dolby Digital DTS Up to 6.1ch PCM 2ch DTS re-encoded DTS DTS
DTS-HD HRA Up to 7.1ch PCM 2ch DTS re-encoded DTS-HD HRA DTS DTS-HD MA Up to 7.1ch PCM 2ch DTS re-encoded DTS-HD MA DTS
Audio Stream  on DVD PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch
Dolby Digital Up to 5.1ch PCM 2ch Dolby Digital Dolby Digital Dolby Digital DTS Up to 6.1ch PCM 2ch DTS DTS DTS
Defi nition for  Blu-ray Disc AnyDecodes Primary, Secondary and 
Effect audio streams together into  PCM audio. Decodes Primary, Secondary and 
Effect audio streams together into  PCM audio, then re-encodes the  PCM audio into DTS bitstream. Outputs only the Primary audio 
soundtrack (main soundtrack of the 
movie) so that your receiver can decode  the audio bitstream. You will not hear  Secondary and Effect audio.
HT-C 5900_E LS _0504.in dd   3 5HT-C5900_ELS_0504.indd   352010-0 5-0 4     1 1:0 5:2 02010-05-04    11:05:20
 
						

							
36 English
Setup
Dynamic Range Control
You can listen at low volumes but still hear dialog 
clearly. This is only active when a Dolby Digital 
signal is detected.Off  : Turn Dynamic Range Control off.
On  : Choose to listen to a movie at a lower 
volume without losing clarity of dialog.
Auto  : The Dynamic Range Control will be set 
automatically based on the information 
provided by the Dolby TrueHD Soundtrack.
AV Sync
Video may look slower than the audio when the 
product is connected to a digital TV. If this occurs, 
adjust the audio delay time to match the video.
You can set the audio delay time between 
0 msec and 300 msec. Set it to the optimal 
status.
System
Initial Settings
By using the Initial Settings, you can set 
language, TV aspect, Musical Auto Calibration 
and Network setting, etc. 
For more information on the settings, refer to the 
corresponding section in this user manual.
Internet@TV Screen Size
Set the Internet@TV Screen to the optimal size.
Size 1  : Display smaller application icons, you 
may see some black on sides of screen.
Size 2  : Display normal application icons.
Size 3  : Display larger application icons, image 
may be too large for your TV screen.
Anynet+(HDMI-CEC)
Anynet+ is a convenient function that offers linked 
operations with other Samsung products with the 
Anynet+ feature.
To operate this function, connect this product to 
a Samsung TV with an HDMI cable.
•
•
•
•
•
•
•
You can operate this product using a Samsung 
TV remote control and start disc playback simply 
by pressing the  PLAY (► ) button on the TV’s 
remote control.
For more information, please see the TV user 
manual.
Off  : Anynet+ function will not work.
On  : Anynet+ function will work.
NOTE
This function is not available if the HDMI cable 
does not support CEC.
If your Samsung TV has an 
n logo, then 
it supports the Anynet+ function.
Depending on your TV, certain HDMI output 
resolutions may not work.
Please refer to the user manual of your TV.
The Anynet+ function is supported only when 
an HDMI Cable is connected to the HDMI OUT 
of the product.
If the HDMI cable or the power code is 
unplugged, or if the product is turned off 
abnormally due to power failure, fi rst connect 
the HDMI cable again; turn on all devices 
including the product, and use the ANYNET+ 
function under the TV menu to activate all 
connected devices again.
BD Data Management
Enables you to manage the downloaded contents from a 
Blu-ray Disc that supports the BD-LIVE service. 
You can check the device information including the 
storage size, delete the BD data or change the Flash 
memory device. Change Device allows you to select either 
the product's Internal Memory or External Memory 
(connected USB Device). If the data to be stored from 
BD-LIVE is greater than the size of the remaining memory 
or the Internal Memory is full, connect an External USB 
device, then select External Device in the menu. 
Display
Audio
SystemNetwork
Language
Security
General
Support
Settings 
On-Screen Menu  :Disc Menu  :
Audio :
Subtitle :BD Data ManagementCurrent Device  : Internal Flash MemoryTotal Size  : 589MB
Available Size  : 589MB
Delete BD Data    |
Change Device  : 
Internal Flash Memory
  > Move s Select  r Return
•
•
✎





HT-C 5900_E LS _0504.in dd   3 6HT-C5900_ELS_0504.indd   362010-0 5-0 4     1 1:0 5:2 02010-05-04    11:05:20
 
						

							
English 37
03 Setup
Description of Device(Storage) Information on 
the Product
Total Size : Total size of the Device (Storage).
Available Size :  Available size of the Device (Storage).
NOTE
In the external memory mode, disc playback 
will be stopped if you disconnect the USB 
device in the middle of the playback.
Only those USB  devices formatted in FAT fi le 
system (DOS 8.3 volume label) are supported, 
and it is recommended to use USB devices 
that support USB 2.0 protocol, 4 MB/sec or 
faster read/write speed.
The Resume Play function may not work after 
formatting the storage device.
The total size of BD Data Management may 
differ, depending on the software version.
Clock
Set time-related functions.
Display
Audio
SystemNetwork
Language
Security
General
Support
Settings 
On-Screen Menu  :Disc Menu  :
Audio :
Subtitle :ClockClock Mode  : Auto  |Clock Set 
Time Zone  : GMT + 0:00
DST   : Off
  > Move s Select  r Return
Clock Mode  : You can select  Auto or Manual .
If you select  Manual, the Clock Set  menu will 
be activated while  DST will be deactivated.
Clock Set  : You can specify the current time 
and date manually.
Time Zone  : You can specify the time zone 
that is applicable to your area.
DST  : You can set DST (Daylight Saving Time) 
1 hour, 2 hours and off.
•
•
✎




•
•
•
•
DivX(R) Registration
View DivX(R) VOD Registration Code to purchase 
and play DivX(R) VOD content.
Display
Audio
SystemNetwork
Language
Security
General
Support
Settings 
Initial Setting
Disc Menu  :
Audio :
Subtitle :
DivX(R) Video On Demand
Your registration code is : XXXXXXXXXX To learn more visit www.divx.com/vod
OK
 NOTE
This option is not activated if you select OK.
To activate this option, please activate the 
DivX(R) Deactivation.
DivX(R) Deactivation
Select this to get a new registration code.
Display
Audio
SystemNetwork
Language
Security
General
Support
Settings 
Initial Setting
Disc Menu  :
Audio :
Subtitle :
Do you want to deactivate your device?
Yes
No
NOTE
This function can be operated when DivX(R) 
Registration function is deactivated.
✎

✎

HT-C 5900_E LS _0504.in dd   3 7HT-C5900_ELS_0504.indd   372010-0 5-0 4     1 1:0 5:2 12010-05-04    11:05:21
 
						

							
38 English
Setup
Network Setup
To begin setting up the network connection for 
your product, follow these steps:
In the Home menu, press the ◄► buttons to 
select the Settings, and then press the 
ENTER  button.
Press the ▲▼ buttons to select  Network, 
and then press the  ENTER button.
Press the ▲▼ buttons to select  Network 
Settings , and then press the  ENTER button.
Press the ▲▼ buttons to select  Network 
Type , and then press the  ENTER button.
Press the ▲▼ buttons to select  Wired or 
Wireless , and then press the  ENTER button.
Go to the next section.
Network Settings 
Please contact your ISP to fi nd out if your IP 
address is static or dynamic. If it is dynamic, we 
recommend using the Auto setting. This is the 
easiest and will work in the majority of cases. If it is 
static, you must use the manual set up procedure.
Directions for wired networks are below. Directions 
for wireless networks are after the directions for 
wired networks.
Wired Network
In the Network Settings menu, press the 
▲▼ buttons to select  Network Settings, 
and then press the  ENTER button.
The Internet Protocol Setup screen appears.
Press the ► button, then select  Auto or 
Manual , and then press the  ENTER button.
Setting Up a Wired Connecton - Auto If you selected  Auto, the Network Function 
acquires and fi lls in the values for IP Address, 
Subnet Mask, etc., automatically.
NOTE
This process can take up to fi ve minutes.
1.
2.
3.
4.
5.
6.
1.
2.
1.
✎

Network SettingInternet Protocol Setup  : Auto   IP Address  : 0 0
 0
 0
 
Subnet Mask  :  0
 0
 0
 0
 
Gateway :  0
 0
 0
 0
 
DNS     : Auto DNS Server  :  0 0
 0
 0
 
  > Move " Enter ' Return
After the Network Function has acquired the 
network values, press the  RETURN button. 
Then, run a Network Test to ensure the 
product has connected to your network (See 
page 41).
If the Network Function does not acquire the 
network values or you selected Manual, go to 
the directions for Manual Setup.
Setting Up a Wired Connecton - Manual
If the Auto Setting does not work, you’ll need to set 
the Network Setting values manually.
To get the Network setting values from most 
Windows computers, follow these steps:
Right click the Network icon on the bottom 
right of the screen.
In the pop-up menu, click Status.
On the dialog that appears, click the Support 
tab.
On the Support tab, click the Details button.
The Network settings are displayed.
To enter the Network settings into your product, 
follow these steps:
On the Internet Protocol Setup screen, press 
the  ENTER  button.
Press the ▲▼ buttons to select  Manual, 
and then press the  ENTER button.
Press the ▼ button to go to the fi rst entry 
fi eld (IP Address).
Network SettingInternet Protocol Setup  : Manual  
IP Address  :  0 0
 0
 0
 
Subnet Mask  :  255
 255
 255
 0
 
Gateway :  0
 0
 0
 0
 
DNS   : Manual
DNS Server  :  0
 0
 0
 0
 
  > Move " Enter ' Return
2.
3.
1.
2.
3.
4.
1.
2.
3.
HT-C 5900_E LS _0504.in dd   3 8HT-C5900_ELS_0504.indd   382010-0 5-0 4     1 1:0 5:2 32010-05-04    11:05:23
 
						

							
English 39
03 Setup
Use the number buttons on your remote to 
enter numbers.
When done with each fi eld, use the ► 
button to move successively to the next 
fi eld.
You can also use the other arrow buttons to 
move up, down, and back.
Enter the IP Address , Subnet Mask , and 
Gateway  values.
Press the ▼ button to go to  DNS.
Press the ▼ button to go to the fi rst DNS 
entry fi eld.
Press the  RETURN button on your remote.
Run a Network Test to ensure the product 
has connected to your network (See page 
41).
Wireless Network
You can setup the wireless network three ways: Using PBC (WPS)
Using the Auto Network Search function.
Manually.
Each method is described below.
Setting Up the Wireless Network 
Connection - PBC (WPS)
The easiest way to set up the wireless network 
connection is using the PBC (WPS) function.
If your wireless router has a PBC (WPS) button, 
follow these steps:
In the Network Settings menu, press the 
▲▼ buttons to select  Network Settings, 
and then press the  ENTER button.
The Internet Protocol Setup screen appears.
Press the  RED(A) button on the remote 
control.
Press the  PBC (WPS)  button on your router 
within two minutes. Your product displays 
the Network Selection Screen, and 
automatically acquires all the network 
setting values it needs and connects to your 
network. When it is done, it displays an  OK 
button. Press the  ENTER button on your 
remote.
4.
5.
6.
7.
8.
9.
10.
•
•
•
1.
2.
3.After the network connection is set up, 
press the  RETURN button to exit the 
Network Setting screen.
Setting Up the Wireless Network 
Connection - Auto Network Search
Most wireless networks have an optional security 
system that requires devices that access the 
network to transmit an encrypted security code 
called an Access or Security Key. The Security Key 
is based on a Pass Phrase, typically a word or a 
series of letters and numbers of a specifi ed length 
you were asked to enter when you set up security 
for your wireless network. If you use this method 
of setting up the network connection, and have 
a Security Key for your wireless network, you will 
have to enter the Pass Phrase during the setup 
process.
Setting Up the Network Connection
To set up the wireless connection using Auto 
Network Search, follow these steps:
In the Network Settings menu, press the 
▲▼ buttons to select  Network Settings, 
and then press the  ENTER button.
The Internet Protocol Setup screen appears.
Press the ▲▼ buttons to select the 
Internet Protocol Setup , and then press 
the  ENTER  button.
Press the ▲▼ buttons to select  Auto or 
Manual , and then press the  ENTER button.
If you selected  Auto, press the ▲ button to 
go to  Select a network , and then press the 
ENTER  button.
The Network function searches for available 
wireless networks.
When done, it displays a list of the available 
networks.
Network SettingSelect a network  : Not Selected
Internet Protocol Setup  : Auto   
IP Address  : 0 0
 0
 0
 
Subnet Mask  :  0
 0
 0
 0
 
Gateway :  0
 0
 0
 0
 
DNS     : AutoDNS Server  :  0 0
 0
 0
 a PBC (WPS)     > Move     " Enter    ' Return
4.
 1.
2.
3.
4.
H T-C 5900_E LS _0504.in dd   3 9HT-C5900_ELS_0504.indd   392010-0 5-0 4     1 1:0 5:2 42010-05-04    11:05:24
 
						

							
40 English
Setup
In the list of networks, press the ▲▼ 
buttons to select a network, and then press 
the ENTER  button.
If the PIN/Security pop-up appears, go to 
Step 7. If the Network Connecting Screen 
appears, go to Step 11.
Press the ▲▼ buttons to select PIN or 
Security.
For most home networks, you would select 
Security (for Security Key).
On the Security screen, enter your network’s 
Pass Phrase.
NOTE
You should be able to fi nd the Pass Phrase 
on one of the set up screens you used to set 
up your router or modem.
  – 
 
     
 
   
 a  
 b
 
Network SettingSecurity Key
ABCDE FG
HI JKLMN
OPQRS T U VWX Y Z0~9Number
Lower case
Delete
space
0 entered
  
Move    " Select     ' Return
To enter the Pass Phrase, follow these 
general directions:
Press the number keys on your remote to 
enter numbers.
Use the arrow keys on your remote to 
move from button to button on the 
Security Key screen.
Pressing the  RED (A) button on the 
remote lets you change the text displayed 
on the buttons to lower case, upper case, 
numbers, or icons. To enter a letter or 
symbol, move the cursor to the letter or 
symbol, and then press the  ENTER 
button.
To delete the last letter or number you 
entered, press the  GREEN (B) button.
5.
6.
7.
8.
✎

9.
•
•
•
•
When done, press the  BLUE (D) button on 
your remote, and then press the  ENTER 
button.
Wait until the connection confi rmation 
message is displayed, and then press the 
ENTER  button. The Network Settings 
screen reappears.
To test the connection, press the ▼ button 
to select  Network Test , and then press the 
ENTER  button.
Setting Up the Wireless Network 
Connection - Manual
If the Auto Setting does not work, you need to 
enter the Network settng values manually.
To get the Network setting values from most 
Windows computers, follow these steps:
Right click the Network icon on the bottom 
right of the screen.
In the pop-up menu, click Status.
On the dialog that appears, click the 
Support tab.
On the Support tab, click the Details button. 
The Network settings are displayed.
To Enter the Network settings into your product, 
follow these steps: On the Internet Protocol Setup screen, 
press the  ENTER button.
Press the ▲▼ buttons to select  Manual, 
and then press the  ENTER button.
Press the ▼ button to go to the fi rst entry 
fi eld (IP Address).
Network SettingSelect a network  : Not Selected
Internet Protocol Setup  : Manual   
IP Address  :  0
 0
 0
 0
 
Subnet Mask  :  255
 255
 255
 0
 
Gateway :  0
 0
 0
 0
 
DNS     : Manual 
DNS Server  :  0
 0
 0
 0
 
a PBC (WPS)     > Move     " Enter    ' Return
Use the number buttons to enter numbers.
10.
11.
12.
1.
2.
3.
4.
1.
2.
3.
4.
HT-C 5900_E LS _0504.in dd   4 0HT-C5900_ELS_0504.indd   402010-0 5-0 4     1 1:0 5:2 52010-05-04    11:05:25