Samsung Ht C5900 User Manual

							
English 21
02 Connections
Connecting External Devices/your TV via HDMI
HDMI is a standard digital interface for connection to such devices as a\
 TV, projector, DVD player, Blu-ray 
player, set top box and more.
HDMI removes any loss of signal from analogue conversion, enabling you t\
o enjoy video and audio sound 
quality as it was originally created in the digital source.
HDMI OUT : Connecting to a TV with an HDMI Cable (BEST QUALITY)
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the bac\
k of the product to the 
HDMI IN jack on your TV.
 NOTE
Certain HDMI output resolutions may not work, depending on your TV.
If an HDMI cable is connected or removed during playback of a CD-DA, MP3\
 or JPEG fi le, the product will 
stop playing.
After making the video connection, set the Video input source on your TV\
 to match the corresponding Video 
output (HDMI, Component or Composite) on your product.
See your TV owner's manual for more information on how to select the TV'\
s Video Input source.
If you have set the product's remote control to operate your TV, press t\
he TV SOURCE button on the remote 
control and select HDMI as the external source of the TV.
You must have an HDMI connection to enjoy videos with 3D technology.
A long HDMI cable may cause a screen noise. If this is the case, set Dee\
p Color to Off in the menu.
✎






AUX IN
DIGITAL
AUDIO IN
DVD or Blu-ray Player SAT(Satellite/Set top box)
HDMI INHDMI OUT
HT-C 5900_E LS _0504.in dd   2 1HT-C5900_ELS_0504.indd   212010-0 5-0 4     1 1:0 4:5 72010-05-04    11:04:57
 
						

							
22 English
Connections
HDMI IN : Connecting to an External Component with an HDMI Cable
Connect an HDMI cable (not supplied) from the HDMI IN jack on the back\
 of the product to the 
HDMI OUT jack on your digital devices.
Press the FUNCTION  button to select  HDMI. IN1 or HDMI. IN2  input.
The mode switches as follows : BD/DVD  D. IN   AUX   HDMI. IN1   HDMI. IN2   FM
HDMI Auto Detection Function
The product's video output will automatically change to HDMI mode when c\
onnecting an HDMI cable 
before power is on. For possible HDMI resolutions, see page 31.
This function is not available if the HDMI cable does not support CEC.
HDMI connection description- HDMI outputs only a pure digital signal to the TV.
-   If your TV does not support HDCP, random noise appears on the screen.
What is the HDCP?
HDCP (High-band width Digital Content Protection) is a system for prot\
ecting BD/DVD content outputted via 
HDMI from being copied. It provides a secure digital link between a vide\
o source (PC, DVD. etc) and a display 
device (TV, projector. etc). Content is encrypted at the source device\
 to prevent unauthorized copies from being 
made.
CAUTION
The Anynet+ function is supported only when an HDMI Cable is connected t\
o the HDMI OUT of the 
product.
1.
2.
•
•
•
!

Connecting the FM Antenna
Connect the FM antenna supplied to the FM 
75 Ω COAXIAL Jack.
Slowly move the antenna wire around until you 
fi nd a location where reception is good, then 
fasten it to a wall or other rigid surface.
NOTE
This product does not receive AM broadcasts.
1.
2.
✎

WIiPodWIiPod
FM ANT
FM Antenna (supplied)
H T-C 5900_E LS _0504.in dd   2 2HT-C5900_ELS_0504.indd   222010-0 5-0 4     1 1:0 4:5 82010-05-04    11:04:58
 
						

							
English 23
02 Connections
METHOD 1 : Component Video  (BETTER QUALITY)
If your television is equipped with Component Video inputs, connect a Co\
mponent video cable (not 
supplied) from the Component Video Output (Pr, Pb and Y) Jacks on the\
 back of the product to the 
Component Video Input J
acks on your TV.
 NOTE
You can select from a variety of resolution settings such as 1080i, 720p\
, 576p(480p) and 576i(480i), 
depending on the disc type. (See page 31)
The actual resolution may differ from the setting in the Setup menu if b\
oth Component and HDMI cables are 
connected. 
The resolution may also be different depending on the disc. (See page 3\
1)
After making the video connection, set the Video input source on your TV\
 to match the corresponding Video 
output (HDMI, Component or Composite) on your product.
See your TV owner's manual for more information on how to select the TV'\
s Video Input source.
If you have set the product's remote control to operate your TV, press t\
he TV SOURCE button on the remote 
control and select COMPONENT as the external source of the TV.
In DVD playback, if both HDMI and Component jacks are connected and you \
select the Component 1080p, 
1080i, 720p or 576p(480p) mode, the Display Setup menu will show the o\
utput resolution as 1080p, 1080i, 
720p or 576p(480p) in the menu. The resolution is actually 576i(480i)\
.
METHOD 2 : Composite Video (GOOD QUALITY) 
Connect the supplied Video cable from the VIDEO OUT jack on the back of \
the product to the VIDEO 
IN jack on your TV.
NOTE
The VIDEO source is always output in 576i(480i) resolution regardless \
of the resolution set in the Setup 
menu. (See page 31)
After making the video connection, set the Video input source on your TV\
 to match the corresponding 
Video output (HDMI, Component or Composite) on your product.
See your TV owner's manual for more information on how to select the TV'\
s Video Input source.
If you have set the product's remote control to operate your TV, press t\
he  TV SOURCE button on 
the remote control and select VIDEO as the external source of the TV.
CAUTION
Do not connect the unit through a VCR. Video signals fed through VCRs ma\
y be affected by 
copyright protection systems and the picture will be distorted on the te\
levision.
✎





✎



!

Connecting the Video Out to your TV
LAN
AUX INWIRELESSLAN
LAN
AUX INWIRELESSLAN
COMPONENT OUT
VIDEO OUT
Red
YellowMETHOD 1METHOD 2Blue Green
HT-C 5900_E LS _0507.in dd   2 3HT-C5900_ELS_0507.indd   232010-0 5-0 7     2 :1 8:5 32010-05-07    2:18:53
 
						

							
24 English
Connections
Connecting Audio from External Components
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-T\
op Box).
Connect the Digital Input (OPTICAL) on the product to the Digital Outp\
ut of the external digital 
component.
  Press the FUNCTION  button to select  D.IN input.
The mode switches as follows :  BD/DVD  D. IN   AUX   HDMI. IN1   HDMI. IN2   FM
NOTE
To see video from your Cable Box/Satellite receiver, you must connect it\
's video output to a TV.
This  s ys te m  s u p ports  D ig it a l  s a m plin g  fr e q uen cie s o f  3 2 k H z o f  h ig her fr o m  e xte rn al  d ig it a l  c o m ponen ts.This system supports Digital sampling frequencies of 32 kHz of higher fr\
om external digital components.
This system supports only DTS and Dolby Digital audio, MPEG audio which \
is bitstream cannot be supported.
AUX : Connecting an External Analogue Component
Analogue signal components such as a VCR.
Connect AUX IN (Audio) on the product to the Audio Out of the external\
 analogue component. 
Be sure to match connector colours.
 
Press the  FUNCTION  button to select  AUX input. 
The mode switches as follows :  BD/DVD  D. IN   AUX   HDMI. IN1   HDMI. IN2   FM
NOTE
  
You can connect the Video Output jack of your VCR to the TV, and connect\
 the Audio Output jacks of 
the VCR to this product.
1.
2.
•
✎



1.•
2. •
✎

HDMI INS
COMPONENT OUT
VIDEO OUT
LAN
HDMI OUT
WIRELESS LANOPTICAL
HDMI INS
COMPONENT OUT
VIDEO OUT
LAN
HDMI OUT
WIRELESS LAN
DIGITAL
AUDIO IN
AUX IN
Optical Cable
(not supplied)
Set-Top Box VCRWhite
Red
OPTICAL AUXAudio Cable
 
(not supplied)
If the external analogue 
component has only one 
Audio Out, connect either 
left or right.
H
T-C 5900_E LS _0504.in dd   2 4HT-C5900_ELS_0504.indd   242010-0 5-0 4     1 1:0 4:5 92010-05-04    11:04:59
 
						

							
English 25
02 Connections
Connecting to the Network
This product enables you to view network based services (See pages 57~6\
2) such as Internet@TV and 
BD-LIVE, as well as receive software upgrades when a network connection \
is made. We recommend 
using an AP (Access Point) or IP router for the connection.
For more information on router connection, refer to the user manual of t\
he router or contact the router
manufacturer for technical assistance.
Cable Network
Using the Direct LAN Cable (UTP cable), connect the LAN terminal of th\
e product to the LAN 
terminal of your modem.
Set the network options. (See page 38)
NOTE
Internet access to Samsung’s software update server may not be allowe\
d, depending on the router you use or the 
ISP’s policy. For more information, contact your ISP (Internet Servi\
ce Provider).
For DSL users, please use a router to make a network connection.
For the AllShare function, a PC must be connected in the network as show\
n in the fi gure.
1.
2.
✎



HDMI IN
COMPONENT OUT
VIDEO OUTAUX IN
HDMI OUT
WIRELESS LAN
HDMI IN
COMPONENT OUT
VIDEO OUTAUX IN
HDMI OUT
WIRELESS LAN
LAN
RouterBroadband modem Broadbandservice
Or
Broadband modem
(with integrated router)
Broadband service
Networking with PC forAllShare function
(See pages 61~62)
H T-C 5900_E LS _0504.in dd   2 5HT-C5900_ELS_0504.indd   252010-0 5-0 4     1 1:0 5:0 02010-05-04    11:05:00
 
						

							
26 English
Connections
Wireless Network
You can connect to the network with a Wireless IP sharer.A wireless AP/IP router is required to make a wireless network connectio\
n. Connect the wireless
LAN adapter to the Wireless LAN Adapter on the rear panel of the product\
. 
Set the network options. (See page 38)
NOTE
This product is compatible with only Samsung's Wireless LAN Adapter. (n\
ot supplied) (Model name: WIS09ABGN).
-  The Samsung Wireless LAN Adapter is sold separately. Contact a Samsung E\
lectronics retailer for purchasing.
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n\
 is recommended for stable operation of the 
wireless network.)
Wireless LAN, by its nature, may cause interference, depending on the us\
e condition (AP performance, distance, obstacles, 
interference by other radio devices, etc).
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not su\
pported.
When applying the security key for the AP (wireless IP sharer), only t\
he following is supported. Authentication Mode : WEP, WPAPSK, WPA2PSK
Encryption Type : WEP, AES
For the AllShare function, a PC must be connected in the network as show\
n in the fi gure.
Attaching the Toroidal Ferrite Core to the Speaker Cables of the Main Un\
it
If you attach a Toroidal ferrite core to the Speaker Cables of the man u\
nit, it will help to prevent 
RF interference from radio signals.
Pull the fi xing tab of the Toroidal ferrite core to open it.
Make a loop once in the Speaker Cables.
Attach the Toroidal ferrite core to the Speaker Cables of the Main Unit \
as the fi gure shows and press it until 
it clicks.
1.
2.
✎





1)
2)

1.
2.
3.
HDMI OUTHDMI OUT COMPONENT OUT
VIDEO OUT
LAN
AUX INWIRELESSLAN
HDMI OUT
COMPONENT OUT
VIDEO OUT
LAN
AUX INWIRELESSLANWireless IP sharer
Wireless LAN 
Adapter
(not included)
Networking with PC for
AllShare function
(See pages 61~62)
PC
Broadband
service
SPEAKER IMPEDANCE : 3 
WIRELESS
FM ANTiPod
H
T-C 5900_E LS _0504.in dd   2 6HT-C5900_ELS_0504.indd   262010-0 5-0 4     1 1:0 5:0 22010-05-04    11:05:02
 
						

							
English 27
03 Setup
Before Starting (Initial Settings)
Turn on your TV after connecting the product.
(When the product is connected to TV for the fi rst 
time,  product  will turn on automatically and the 
Initial Settings screen will be displayed.)
 > Move s Select
Initial Settings I On-Screen Language
Select a language for the on-screen displays.
English
Français
Deutsch
Español
Italiano
Nederlands
Press the ▲▼ buttons to select the desired 
language, then press the  ENTER button.
Press the  ENTER button to select Start button.
     a Previous " Select
Initial Settings
TV Aspect, Musical Auto Calibration and Network will be set.
Each setting may be changed later under "Settings"
Start
Press the ▲▼ buttons to select desired TV 
Aspect ratio, then press the  ENTER button. 
(See page 30)
Musical Auto Calibration  screen will be displayed.
Plug the ASC microphone into the  ASC IN jack 
on the product. (See page 34)
Press the  ENTER button to select Start button.
       d Skip
Initial Settings I Musical Auto Calibration
Preparing...
Setting the Musical Auto Calibration function 
takes about 3 minutes.
1.
2.
3.
4.
5.
6.
Press the ◄► buttons to the select the 
desired Network Settings: Wired, Wireless or 
PBC (WPS), then press the  ENTER button. 
(See pages 38~41)
The Network Test will start and Initial Settings 
will be completed.
a Previous d Skip < Move " Select
Initial Settings I Network
Network Setting is needed to use various Internet services.
Choose the primary method for connecting to network.
Wired : Set the network by using Ethernet cable.
Please make sure that Ethernet cable is connected.
WiredWirelessPBC (WPS)
Press the  OK button. 
The home menu will be displayed. (For more 
information about home menu, please see 
page 28)
Home Menu
internet radioYou Tube
No Disc a Change Device   d View Devices " Enter
Please activate Internet@TV service
to enjoy a variety of Internet Services.
 NOTE
When the product is connected to TV for the 
fi rst time, product will turn on automatically.
Do not confuse because this is not 
malfunction.
The home menu will not be displayed if you do 
not confi gure the initial settings.
If you press the  BLUE(D) button during the 
Musical Auto Calibration/Network setup, you 
can access the home menu even if the 
network setup is not completed yet.
When you return to home menu, the full 
screen mode will be cancelled automatically.
7.
8.
•
✎




Setup
H T-C 5900_E LS _0504.in dd   2 7HT-C5900_ELS_0504.indd   272010-0 5-0 4     1 1:0 5:0 32010-05-04    11:05:03
  
						

							
28 English
Setup
If you want to display Initial Settings screen 
again in order to make changes, press the 
STOP ( ) button on the front panel of the 
product for more than 5 seconds with no disc 
inserted.
Use the HDMI cable to connect the product to 
an  Anynet+(HDMI-CEC) -compliant Samsung TV.
If the TV uses a language supported by the 
product, that language will be set to a 
preferred language automatically.
However, the  Anynet+(HDMI-CEC)  feature 
should be set to  On in both TV and the 
product.
If the product is left in the stop mode for more 
than 5 minutes without being operated, a 
screen saver will appear on your TV. If the 
product is left in the screen saver mode for 
more than 25 minutes, the power will 
automatically turn off except during playback 
of a CD-DA (Automatic Power-Off Function).
Setting the Menu
DISC MENU MENU TITLE MENU
TOOLS
RETURN EXIT
INFO
TUNER
POPUP
DISC MENUTITLE MENU
TOOLSINFO
TUNER
POPUP1
2
4
3
1MENU Button : Press this to move to the home menu.
2RETURN  Button : Return to the previous menu.
3
ENTER / DIRECTION  Button:
Press the arrow buttons to move the cursor and select 
an item.
Press the  ENTER button to launch the selected item or 
confi rm the setting.
4EXIT  Button : Press this to exit the menu.


Press the  POWER button.
The Home Menu will appear.
Home Menu
internet radioYou Tube
No Disc a Change Device   d View Devices " Enter
Please activate Internet@TV service
to enjoy a variety of Internet Services.
1
2
4
3
5
6
1Selects the Internet@TV.
2Selects the Videos.
3Selects the Music.
4Selects the Photos.
5Selects the Settings.
6Displays buttons available.
Press the ◄► buttons to select  Settings, 
then press the  ENTER button.
Press the ▲▼ buttons to select the desired 
submenu, then press the  ENTER button.
Press the ▲▼ buttons to select the desired 
item, then press the  ENTER button.
Press the  EXIT button to exit the menu.
NOTE 
When the product is connected to the network, 
select Internet@TV from the home menu. 
Download desired content from  Samsung AppS.
The access step may differ depending on the 
selected menu.
The OSD (On Screen Display) may change in 
this product after upgrading the software 
version.
1.
•
2.
3.
4.
5.
✎



H T-C 5900_E LS _0504.in dd   2 8HT-C5900_ELS_0504.indd   282010-0 5-0 4     1 1:0 5:0 72010-05-04    11:05:07
 
						

							
English 29
03 Setup
Display
You can confi gure various display options such 
as the TV Aspect, Resolution, 3D, etc.
3D
Select whether to play a Blu-ray Disc with 3D 
contents in 3D Mode.
DisplayAudio
System
Network
Language
Security
General
Support
Settings 
3D
Still Mode  : Auto
3D Mode  : Auto
TV Screen Size :      55    inch
 > Move s Select  r Return
3D
3D Mode
Auto : The 3D Blu-ray Disc is played in 3D 
mode if your product detects a TV which 
supports it. It is played in 2D mode if your 
product detects a TV which cannot support it.
3D  : The 3D Blu-ray Disc is played in 3D mode 
at all times. If a TV cannot support 3D Blu-ray 
discs, the TV's screen can be black.
2D  : The 3D Blu-ray Disc is played in 2D mode 
at all times. Choose this to view a picture 
without 3D effect or when a TV cannot support 
3D Blu-ray discs.
NOTE
If you press the  STOP( ) button once during 
the 3D disc playback, 3D mode option will not 
be deactivated.
To activate 3D mode option during the 3D disc 
playback, press the  STOP
( ) button twice.
Depending on the content and its play position, 
vertical black bars could be seen on left or right 
or both sides.
•
•
•
✎


TV Screen Size
Lets you enter the actual screen size of your 
TV so that the product can adjust the image 
according to the screen size and display an 
optimal 3D image. (The maximum allowed 
screen size is 116 inches for this product.)
CAUTION
If you want to enjoy a 3D content, connect a 
3D device (3D compliant AV receiver or TV) 
to the product and wear a 3D glass before 
playing the 3D content.
While watching the 3D video, all analog 
component and composite signals will be 
blocked automatically.
All 3D signals are output only using the 
HDMI cable and through the HDMI OUT 
port.
As the video resolution in 3D play mode is 
fi xed according to the resolution of the 
original 3D video, you can not change the 
resolution to your preference.
Some functions such as BD Wise, or setting 
the screen size or resolution may not 
operate properly in 3D play mode.
You must use a high-speed HDMI cable for 
a proper output of the 3D signal.
Stay at least three times of the length of the 
screen distant from the TV.
-   It is recommended to place the 3D video 
screen forward at eye level.
If the product is connected to some 3D 
devices, the 3D effect may not function 
properly.
You can not use this product for switching a 
2D content to 3D.
!









H T-C 5900_E LS _0504.in dd   2 9HT-C5900_ELS_0504.indd   292010-0 5-0 4     1 1:0 5:0 92010-05-04    11:05:09
 
						

							
30 English
Setup
TV Aspect
Depending on the type of television you have, you 
may want to adjust the screen setting.
16:9 Normal•
Certain movies(4:3 source) 
will be displayed in 4:3 
Pillarbox (black bars on sides 
of picture) if 16:9 normal is 
selected.
16:9 Wide•
You can view the full 16:9 
picture on your widescreen 
TV.
4:3 Letter Box•
Select when you want to see 
the total 16:9 ratio screen a 
Blu-ray Disc/DVD supplies, 
even though you have a TV 
with a 4:3 ratio screen. Black 
bars will appear at the top 
and bottom of the screen.
4:3 Pan-Scan•
Select when you want to see 
the 16:9 video supplied by the 
Blu-ray Disc/DVD without the 
black bars on top and bottom, 
even though you have a TV 
with a 4:3 ratio screen(extreme 
left and right portion of the 
movie picture will be cut off).
NOTE
Depending on the disc type, some aspect ratios 
may not be available.
If you select an aspect ratio and option which is 
different than the aspect ratio of your TV screen, 
then the picture might appear to be distorted.
If you select the 4:3 Pan-Scan or 4:3 Letter Box, 
you can't see full screen by pressing the FULL 
SCREEN  button on the remote control. 
✎



BD Wise (Samsung Products only)
BD Wise is Samsung's latest inter-connectivity feature.
When you connect Samsung products with 
BD-Wise to each other via HDMI, the optimum 
resolution will be set automatically.
Off  : The output resolution will be fi xed 
according to the Resolution previously set, 
regardless of the resolution of the disc.
On  : The original resolution of the BD/DVD disc 
will be output to the TV.
NOTE
If you want to change the resolution in BD 
Wise, you must set BD Wise to  Off in advance.
If you set off the BD Wise, the resolution of the 
connected TV will be adjusted to its maximum 
resolution automatically.
If the product is connected to a device that 
does not support BD Wise, you can not use 
BD Wise function.
For a proper operation of BD Wise, set the BD Wise 
menu of both the product and the TV to  On.
Resolution
Sets the output resolution of the Component and 
HDMI video signal.
The number in 1080p, 1080i, 720p, 576p(480p), 
576i(480i) indicates the number of lines of video. 
The i and p indicate interlace and progressive 
scan, respectively.
Auto  : It automatically checks and sets the optimal 
resolution. (HDMI only)
BD Wise  : Automatically sets the optimal 
resolution when connected via HDMI to a TV with 
the BD Wise feature. (The BD Wise menu item 
appears only if BD Wise is set to On.) (HDMI only) 
1080p  : 
Outputs 1080 lines of progressive video. (HDMI only)
1080i : Outputs 1080 lines of interlaced video.
720p  : Outputs 720 lines of progressive video.
576p/480p  : Outputs 576(480) lines of progressive 
video.
576i/480i  : Outputs 576(480) lines of interlaced 
video. (Component & VIDEO only)
•
•
✎




•
•
•
•
•
•
•
H T-C 5900_E LS _0504.in dd   3 0HT-C5900_ELS_0504.indd   302010-0 5-0 4     1 1:0 5:1 02010-05-04    11:05:10