Samsung Ht C5900 User Manual

English 31
03 Setup
Resolution according to the output mode
Blu-ray Disc playback
Output 
Setup HDMI / connected HDMI / not connected
HDMI Mode
Component/VIDEO ModeComponent Mode VIDEO Mode
Auto Optimal Resolution 576i(480i) - -
1080p, Movie Frame(24Fs) off 1080p@60F 576i(480i) - - 1080p/1080i,
Movie Frame(24Fs) on 1080p@24F 576i(480i) - -
1080i, Movie Frame(24Fs) off 1080i 576i(480i) 1080i 576i(480i) 720p 720p 576i(480i) 720p 576i(480i)
576p(480p) 576p(480p) 576i(480i) 576p(480p) 576i(480i) 576i(480i)...

32 English
Setup
HDMI Format
You can optimize the colour setting from the 
HDMI output. Select a connected device Type.TV  : Select if connected to a TV via HDMI. 
Monitor  : Select if connected to a Monitor via 
HDMI.
NOTE
A TV or monitor has to be connected to the 
product before you select this option.
Movie Frame (24 Fs)
Setting the Movie Frame (24Fs) feature to On
allows you to adjust the product's HDMI output to
24 frames per second for improved picture quality.
You can enjoy the Movie Frame...

English 33
03 Setup
Distance
If the speakers cannot be placed at equal 
distances from the listening position, you can 
adjust the delay time of the audio signals from the 
front, centre, surround and subwoofer speakers.You can set the Speaker Distance between 
1ft(0.3m) and 30ft(9.0m).
DisplayAudioSystem
Network
Language
Security
General
Support
Settings DistanceFront L   : ◄ 10ft (3.0m)  |Front R  :   10ft (3.0m)
Center : 10ft (3.0m)
Surround L  :  10ft (3.0m)
Surround R  :  10ft (3.0m)
Subwoofer :...

34 English
Setup
Musical Auto Calibration 
By setting the Musical Auto Calibration (MAC) 
function just once when you relocate or install the 
product, you can have the product automatically 
recognize the distance between speakers, levels 
between channels, and frequency characteristics 
to create a 5.1-channel sound fi eld optimized for 
your environment.
ASC IN
ASC
microphone
Musical Auto Calibration
You will hear either the Musical Auto Calibration 
mode or the User Speaker Settings.
Off:  You will...

English 35
03 Setup
Digital Output
Set Digital output depending on the connected 
receiver. (For more details, please refer to the 
digital output selection) PCM
Bistream(Re-encode)
Bistream(Audiophile)
Blu-ray Discs may include three audio streams.
-   Primary Audio : The audio soundtrack of the 
main feature.
- 
  Secondary Audio : Additional soundtrack 
such as director or actor's commentary.
-   Interactive Audio : Interactive sounds will be 
heard when selected. Interactive Audio is 
different...

36 English
Setup
Dynamic Range Control
You can listen at low volumes but still hear dialog 
clearly. This is only active when a Dolby Digital 
signal is detected.Off  : Turn Dynamic Range Control off.
On  : Choose to listen to a movie at a lower 
volume without losing clarity of dialog.
Auto  : The Dynamic Range Control will be set 
automatically based on the information 
provided by the Dolby TrueHD Soundtrack.
AV Sync
Video may look slower than the audio when the 
product is connected to a digital TV....

English 37
03 Setup
Description of Device(Storage) Information on 
the Product
Total Size : Total size of the Device (Storage).
Available Size :  Available size of the Device (Storage).
NOTE
In the external memory mode, disc playback 
will be stopped if you disconnect the USB 
device in the middle of the playback.
Only those USB  devices formatted in FAT fi le 
system (DOS 8.3 volume label) are supported, 
and it is recommended to use USB devices 
that support USB 2.0 protocol, 4 MB/sec or 
faster...

38 English
Setup
Network Setup
To begin setting up the network connection for 
your product, follow these steps:
In the Home menu, press the ◄► buttons to 
select the Settings, and then press the 
ENTER  button.
Press the ▲▼ buttons to select  Network, 
and then press the  ENTER button.
Press the ▲▼ buttons to select  Network 
Settings , and then press the  ENTER button.
Press the ▲▼ buttons to select  Network 
Type , and then press the  ENTER button.
Press the ▲▼ buttons to select  Wired or 
Wireless ,...

English 39
03 Setup
Use the number buttons on your remote to 
enter numbers.
When done with each fi eld, use the ► 
button to move successively to the next 
fi eld.
You can also use the other arrow buttons to 
move up, down, and back.
Enter the IP Address , Subnet Mask , and 
Gateway  values.
Press the ▼ button to go to  DNS.
Press the ▼ button to go to the fi rst DNS 
entry fi eld.
Press the  RETURN button on your remote.
Run a Network Test to ensure the product 
has connected to your network (See page...

40 English
Setup
In the list of networks, press the ▲▼ 
buttons to select a network, and then press 
the ENTER  button.
If the PIN/Security pop-up appears, go to 
Step 7. If the Network Connecting Screen 
appears, go to Step 11.
Press the ▲▼ buttons to select PIN or 
Security.
For most home networks, you would select 
Security (for Security Key).
On the Security screen, enter your network’s 
Pass Phrase.
NOTE
You should be able to fi nd the Pass Phrase 
on one of the set up screens you used to set 
up...