Samsung Ht Bd7200 User Manual

71
EnG

●  uSinG thE uSB Function
PlayinG mEDia FilES uSinG thE uSB hoSt FEatuRE
You can enjoy media fi les such as pictures and music saved on an MP3 player, USB memory stick or digital camera.
Connect the USB device to the USB port on 
the side of the unit.
uSB connected appears on the display 
screen and then disappears.
USB icon is displayed on the Setup Menu.
Safe uSB Removal
To prevent damage to the data stored in the USB device, perform safe removal before disconnecting 
the USB cable.
Press the...

Using the USB function
72
uSB host Specification 
USB Host Specification
• Supports USB 1.1 or USB 2.0 compliant devices.
• Supports devices connected using the USB A type cable.
• Supports UMS (USB Mass Storage Device) V1.0 compliant devices.
•   Supports the device of which the connected drive is formatted in the FAT(FAT, 
FAT16, FAT32) file system.
Non-compliance
•  
Does not support a device that requires installing a separate driver on the PC (Windows).
•   
Does not support connection to a USB...

73
EnG

●  RaDio
liStEninG to RaDio
Press the tunER button to select the FM band.
Tune in to the desired station.
Automatic Tuning 1 : When the SkiP () button is 
pressed, a preset broadcast station is selected. 
Automatic Tuning 2 : Press and hold the 
tuninG/ch () button to automatically search for active 
broadcasting stations. 
Manual Tuning : Briefl y press the tuninG/ch () 
button to increase or decrease the frequency incrementally.
main unit
Press the Function button to select the FM band.
Select...

Radio
74

aBout RDS BRoaDcaStinG    
Using the RDS (Radio Data System) to receive FM stations 
RDS allows FM stations to send an additional signal along with their regular program 
signals. For example, the stations send their station names, as well as information 
about what type of program they broadcast, such as sports or music, etc.
When tuned to an FM station which provides the RDS service, the RDS 
indicator lights up on the display.
Description on RDS function
PTY (Program Type) : Displays the...

75
EnG

●  RaDio

PTY (Program Type) indication and PTY-SEARCH function 
One  of the advantages of the RDS service is that you can locate a particular kind of program from the preset channels by 
specifying the PTY codes
to search for a program using the Pty codes
Before you start, remember...
The PTY Search is only applicable to preset stations.
To stop searching any time during the process, press PTY SEARCH while searching.
There is a time limit in doing the following steps. If the setting is...

Using BLUETOOTH
76

You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires!
what iS BluEtooth? 
Bluetooth is a new technology that enables Bluetooth-compliant devices to easily interconnect with each other using a short wireless connection.
A Bluetooth device may cause a noise or malfunction, depending on usage.
When a part of the body is in contact with the receiving/transmitting system of the Bluetooth device or the  Blu-ray Home Cinema.
Electrical variation...

77
EnG

●  uSinG BluEtooth

You can disconnect the Blu-ray Home Cinema from the Bluetooth device. 
(refer to Bluetooth deivice's user's manual)
The Blu-ray Home Cinema will be disconnected.
When the Blu-ray Home Cinema is disconnected from the Bluetooth 
device, the Blu-ray Home Cinema will display " REaD y" on the front 
display.
Press the  Function button on the front panel of the Blu-ray Home Cinema to switch from “BT AUDIO” to another 
mode.
The connected Bluetooth device will wait a...

Using an iPod
78

You can enjoy playback of your iPod using the supplied remote control.
liStEninG to muSic
You can play music fi les stored in the iPod player by connecting it to the 
Blu-ray Home Cinema.
Connect the iPod dock connector to the iPod jack on the Blu-ray 
Home Cinema.
Place the iPod in the Dock.
Your iPod is automatically turned on.
“iPod Connected” message appears on the TV screen.
Press the MENU button on the remote control.
Press the , buttons on the remote control to select iPod...

79
EnG

●  uSinG an 
iPod

To move to the Music List and select a track:
Press the MENU or STOP button.
It stops playing and returns to the music list.
Press the , buttons to select the file you want to play and press the ENTER button.
Press the RETURN or  button to return to the parent menu.
iPod  music categories
File information including the artist name, album name, music title and genre will be displayed according 
to the ID3 Tag information on the appropriate music file.
now Playing
 : Plays a...

Using an iPod
80
watchinG a moviE
You can play video fi les stored in the iPod player by connecting it to the Blu-ray Home Cinema. 
Connect the iPod dock connector to the iPod jack on the Blu-ray Home Cinema.
In the iPod screen, move to videos > Settings and set the tv out 
option to on.
Place the iPod in the Dock. 
“iPod Connected” message appears on the TV screen.
Press the , buttons on the remote control to select iPod mode.
Press the ,, buttons on the remote control to select video and press...