Samsung Ht Bd7200 User Manual

1
ENG

●  CONNECTIONS

Connecting The Speakers
   Press down the terminal tab on the back of the speaker. 
  Insert the black wire into the black terminal (–) and the red wire into    
  the red (+) terminal, and then release the tab.
  Connect the connecting plugs to the back of the Blu-ray Home
  Cinema by matching the colours of the speaker plugs to the speaker
  jacks.
1.
.
3.BlackRed
  If you place a speaker near your TV set, screen colour may be distorted because of the 
magnetic fi eld...



Connections

CONNECTING THE VIDEO OUT TO YOUR TV
Choose one of the three methods for connecting to a TV.
  METHOD 1 : HDMI (BEST)
Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the Blu-ray Home Cinema 
to the HDMI IN jack on your TV.
Certain HDMI output resolutions may not work, depending on your TV.
If an HDMI cable is connected from the player to a TV, the Blu-ray Home Cinema’s output is set to 
HDMI automatically within 10 seconds.
If you are using the Anynet...

3
ENG

●  CONNECTIONS

HDMI connection description
HDMI connector - Supports video and digital audio data.
- HDMI outputs only a pure digital signal to the TV.
-  
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.
Why does Samsung use HDMI?
Analogue TVs require an analogue video/audio signal. However, when playing a BD/DVD, the data  transmitted to a TV is digital. Therefore either a digital-to-analogue converter (in the Blu-ray Home...



Connections

CONNECTING AN iPod
You can enjoy music, video fi les from an iPod through the main unit. For iPod operation with this Blu-ray home 
cinema, see pages 25 and 78 ~ 80.
    Connect the iPod Dock to the iPod Jack on the rear side of the main unit.
 Place the iPod in the dock. 
“iPod Connected” message appears on the TV screen.
 You must have the VIDEO output connected to your TV to view iPod video (See page 25).
As the cable ports are close together, be sure to remove the USB memory...


ENG

●  CONNECTIONS

iPod models that can be used with the HT-BD7200
“Made for iPod” means that an electronic accessory has been designed to connect specifically to 
iPod and has been certi fied by the developer to meet Apple performance standards.
“Works with iPhone” means that an electronic accessory has been designed to connect 
speci fically to an iPhone and has been certi fied by the developer to meet Apple performance 
standards.
Apple is not responsible for the operation of this device...

6

Connections

CONNECTING AUDIO FROM EXTERNAL COMPONENTS
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
     Connect the Digital Input (OPTICAL) on the main unit to the Digital Output of the external digital 
component.
 Press the FUNCTION button on the main unit to select D.IN input.
The mode switches as follows : BD/DVD ➞ D.IN ➞ AUX ➞ BT AUDIO ➞ FM.
To see video from your Cable Box/Satellite receiver, you must...


ENG

●  CONNECTIONS

AUX : Connecting an External Analogue Component
Analogue signal components such as a VCR.
     Connect AUX IN (Audio) on the main unit to the Audio Out of the external analogue component.
 Be sure to match connector colours.
 Press the AUX button on the remote control to select AUX input. 
You can also use the FUNCTION button on the main unit.
The mode switches as follows : BD/DVD ➞ D.IN ➞ AUX ➞ BT AUDIO ➞ FM.
  You can connect the Video Output jack of your VCR to the TV,...

28

Connections

CONNECTING TO THE NETWORK
To access network service or upgrade the current fi rmware, you must make one of the following connections.
By connecting to a network, you can access the BD-LIVE service and software upgrades from Samsung’s update 
server.
Case 1 : Connecting a Direct LAN Cable to your Modem
Using the Direct LAN Cable (UTP cable, not supplied), connect the LAN terminal of the Blu-ray Disc  
Player to the LAN terminal of your modem.
To use the PC streaming function (see pages...


ENG

●  CONNECTIONS

Case 2 : Connecting to a Wireless IP sharer
You can connect to network with a Wireless IP sharer. See page 50 for Wireless Network Setup.
This unit is compatible with only Samsung Wireless LAN Adapter. (not supplied)
(Model name: WIS09ABGN). 
- The Samsung Wireless LAN Adapter is sold separately.
- Contact a Samsung Electronics agent or service centre for purchasing.
You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended 
for stable...

30

Connections
CONNECTING THE FM ANTENNA
     Connect the FM antenna supplied to the FM 75 COAXIAL Jack.
    Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it 
to a wall or other rigid surface.
  This unit does not receive AM broadcasts.
COOLING FAN
The cooling fan supplies cool air to the unit to  prevent overheating.
Please observe the following cautions for your safety.
Make sure the unit is well-ventilated. If the unit has poor ventilation, the...