Samsung Ht Bd2exr User Manual

							
20
connections
CONNECTING THE SPEAKERS
Position of the Blu-ray Home Cinema
Place it on a stand or cabinet shelf, or under the TV stand.
Selecting the Listening PositionThe listening position should be located about 2.5 to 3 times the distan\
ce of the TVs screen size away from the TV. 
Example :  For 32 TVs 2~2.4m (6~8feet)     
For 55 TVs 3.5~4m (11~13feet)
Front SpeakerseiPlace these speakers in front of your listening position, facing inwards\
 (about 45°) toward you.
Place the speakers so that their tweeters will be at the same height as \
your ear.
Align the front face of the front speakers with the front face of the ce\
nter speaker or place them slightly in front 
of the center speakers.
Center Speaker f
It is best to install it at the same height as the front speakers. You c\
an also install it directly over or under the TV.
Surround Speakers hj Place these speakers to the side of your listening position. If there isnt enough room, place these speakers so they face 
each other. Place them about 60 to 90cm (2 to 3feet) above your ear, f\
acing slightly downward.
*   Unlike the front and center speakers, the rear speakers are used to hand\
le mainly sound effects and sound will not 
come from them all the time.
Surround Back Speakers 
Place them so they face forward towards the back of the listener.
Place the surround back speakers about 70 cm to 1 m (2.3~3.3feet) abov\
e surround speakers, facing slightly 
downwards.
Subwoofer
The position of the subwoofer is not so critical. Place it anywhere you \
like.
•
•
H T-BD2_NOGB.indd   20HT-BD2_NOGB.indd   202007-12-6   11:47:222007-12-6   11:47:22
 
						

							
21
 GB
●  CONNECTIONS
Connecting The Speakers
   Press down the terminal tab on the back of the speaker. 
  Insert the black wire into the black terminal (–) and the red wir\
e into    
  the red (+) terminal, and then release the tab.
  Connect the connecting plugs to the back of the Blu-ray Home
  Cinema by matching the colors of the speaker plugs to the speaker
  jacks.
Use the Audio cable to connect the SUBWOOFER OUT jack of 
the main unit to the AUDIO IN jack of the subwoofer. 
1.
2.
3.
4.
BlackRed
   If you place a speaker near your TV set, screen color may be distorted b\
ecause of the 
magnetic fi eld generated by the speaker. If this occurs, place the speaker away fro\
m your 
TV set.M
FM
Front Speaker (R) Center Speaker
Subwoofer Speaker
Front Speaker (L)
Surround-Back Speaker (L)Surround-Back 
Speaker (R)
Surround Speaker (R)
Surround Speaker (L)
Do not let children play with or near the speakers. They could get hurt \
if a speaker falls.
When connecting the speaker wires to the speakers, make sure that the po\
larity (+/  –) is 
correct.
   Keep the subwoofer speaker out of reach of children so as to prevent chi\
ldren from 
inserting their hands or alien substances into the duct (hole) of the \
subwoofer speaker.
   Do not hang the subwoofer on the wall through the duct (hole).



Audio cable
H T-BD2_NOGB.indd   21HT-BD2_NOGB.indd   212007-12-6   11:47:232007-12-6   11:47:23
 
						

							
22
connections
CONNECTING THE VIDEO OUT TO YOUR TV
Choose one of the three methods for connecting to a TV.
 
  METHOD 1 : HDMI ....... (Best Quality)
Connect the HDMI cable from the HDMI OUT jack on the back of the Blu-ray\
 Home Cinema to the HDMI 
IN jack on your TV.
Depending on your TV, certain HDMI output resolutions may not work.
If an HDMI cable is connected from the player to a TV, the Blu-ray Home \
Cinema’s output is set to 
HDMI automatically within 10 seconds.
If you are using the Anynet + feature (see page 42) and Component and \
HDMI are both 
connected, HDMI mode is automatically selected.
When you connect the player to the TV using the HDMI cable for the fi rst time or to a new TV, the 
HDMI output resolution will be automatically set to the highest provided\
 by the TV.
If you connect a Samsung TV to the Blu-ray Home Cinema using an HDMI cab\
le, the player can 
be easily operated using the TV remote control. (This is only available\
 with Samsung TVs that 
support the Anynet+ feature.) 
(See page 42)
If the HDMI cable is connected or removed during playback of a CDDA, MP3\
 or JPEG fi le, the 
player will stop playing.
After making the video connection, set the Video input source on your TV\
 to match the 
corresponding
Video output (HDMI, Component or Composite) on your Home Cinema.
See your TV owners manual for more information on how to select the TV\
s Video Input source.M






METHOD3
(supplied) METHOD2 METHOD1
(supplied)
HT-BD2_NOGB.indd   22HT-BD2_NOGB.indd   222007-12-6   11:47:262007-12-6   11:47:26
 
						

							
23
 GB
●  CONNECTIONS
HDMI Auto Detection Function
The players video output will automatically change to HDMI mode when co\
nnecting an HDMI cable 
while power is on. For possible HDMI resolutions, see page 41.
HDMI (High Defi  nition Multimedia Interface)
HDMI is an interface that enables the digital transmission of video and \
audio data with just a single connector.Using HDMI, the Blu-ray Home Cinema transmits a digital video and audio \
signal and displays a vivid picture on a 
TV having an HDMI input jack.
HDMI connection description
HDMI connector - Supports video and digital audio data.
- HDMI outputs only a pure digital signal to the TV.
-  If your TV does not support HDCP (High-bandwidth Digital Content Protec\
tion), random noise appears on the 
screen.
Why does Samsung use HDMI?
Analog TVs require an analog video/audio signal. However, when playing a\
 BD/DVD, the data 
transmitted to a TV is digital. Therefore either a digital-to-analog con\
verter (in the Blu-ray Home Cinema) or an 
analog-to-digital converter (in the TV) is required. During this conve\
rsion, the picture quality is degraded due to 
noise and signal loss. HDMI technology is superior because it requires n\
o D/A conversion and is a pure digital 
signal from the player to your TV.
What is the HDCP?
HDCP (High-band width Digital Content Protection) is a system for prot\
ecting BD/DVD content outputted via HDMI 
from being copied. It provides a secure digital link between a video sou\
rce (PC, DVD. etc) and a display device (TV, 
projector. etc). Content is encrypted at the source device to prevent u\
nauthorized copies from being made.
What is Anynet+?
Anynet+ is a convenient function that offers linked operation of this un\
it through Samsung TVs with the Anynet+ 
feature.
-   If your Samsung TV has an 
 logo, then it supports the Anynet+ function.
-        If you turn on the player and insert a disc, the player will start playi\
ng the disc, and the TV will turn on 
automatically and switch to HDMI mode.
-   If you turn on the player and press the Play button with a disc already \
inserted, the TV will immediately turn on 
and switch to HDMI mode.
METHOD 2 : Component Video .... (Better Quality)
If your television is equipped with Component Video inputs, connect a Co\
mponent video cable(not 
supplied) from the Component Video Output (Pr, Pb and Y) Jacks on the\
 back of the Blu-ray Home 
Cinema to the Component Video Input Jacks on your TV.
You can select from a variety of resolution settings such as 1080i, 720p\
, 576p/480p and 576i/480i, 
depending on the disc type. (See page 41)
The actual resolution may differ from the setting in the SETUP menu if b\
oth Component and HDMI 
cables are connected. The resolution may also be different depending on \
the disc. (See page 41)
After making the video connection, set the Video input source on your TV\
 to match the 
corresponding Video output (HDMI, Component or Composite) on your Home\
 Cinema.
See your TV owners manual for more information on how to select the TV\
s Video Input source.
METHOD 3 : Composite Video ....... (Good Quality) 
Connect the supplied Video cable from the VIDEO OUT jack on the back of \
the Blu-ray Home Cinema 
to the VIDEO IN jack on your TV.
The VIDEO source is always output in 576i/480i resolution regardless of \
the resolution set in the 
SETUP menu. (See page 41)
After making the video connection, set the Video input source on your TV\
 to match the 
corresponding Video output (HDMI, Component or Composite) on your Home\
 Cinema.
See your TV owners manual for more information on how to select the TV\
s Video Input source.
•
•
•
•
•
M


M

HT-BD2_NOGB.indd   23HT-BD2_NOGB.indd   232007-12-6   11:47:282007-12-6   11:47:28
 
						

							
24
connections
CONNECTING AUDIO FROM EXTERNAL COMPONENTS
AUX : Connecting an External Analog Component
Analog signal components such as a VCR.      Connect AUX IN (Audio) on the main unit to the Audio Out of the extern\
al analog component.
 
Be sure to match connector colors.
 
Press the  AUX button on the remote control to select  AUX input. 
You can also use the  FUNCTION button on the main unit.
The mode switches as follows :  BD/DVD ➞ D.IN 1  ➞  D.IN 2  ➞  AUX  ➞  FM .
  
You can connect the Video Output jack of your VCR to the TV, and connect\
 the Audio 
Output jacks of the VCR to this product.
1.
•
2. •M
FM
Audio Cable (not supplied)
If the external analog component has 
only one Audio Out, connect either left 
or right.
H T-BD2_NOGB.indd   24HT-BD2_NOGB.indd   242007-12-6   11:47:292007-12-6   11:47:29
 
						

							
25
 GB
●  CONNECTIONS
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-T\
op Box).
      Connect the Digital Input (OPTICAL 1 or OPTICAL 2) on the main unit to\
 the Digital Output of the 
external digital component.
  Press the  D.IN button on the remote control to select  D.IN 1 or D.IN 2  input.
You can also use the  FUNCTION button on the main unit.
The mode switches as follows :  BD/DVD ➞ D.IN 1  ➞  D.IN 2  ➞  AUX  ➞  FM .
To see video from your Cable Box/Satellite receiver, you must connect it\
s video output 
to a TV.
This  s ys te m  s u p ports  D ig it a l  s a m plin g  fr e q uen cie s o f  3 2 k H z o f  h ig her fr o m  e xte rn al  d ig it a l This system supports Digital sampling frequencies of 32 kHz of higher fr\
om external digital 
c o m ponen ts .components.
1.
2.
•
M

Optical Cable
 (not supplied)
HT-BD2_NOGB.indd   25HT-BD2_NOGB.indd   252007-12-6   11:47:312007-12-6   11:47:31
 
						

							
26
connections
CONNECTING TO SAMSUNGS FTP/INTERNET SITE FOR 
SOFTWARE UPGRADES
Using the Direct LAN Cable (UTP cable), connect the LAN terminal on th\
e rear of the Blu-ray Home Cinema to 
the LAN terminal of your modem.  Connect to the Internet for future software upgrades.
See pages 46~49 for the Software Upgrade procedure.
•M
H
T-BD2_NOGB.indd   26HT-BD2_NOGB.indd   262007-12-6   11:47:332007-12-6   11:47:33
 
						

							
27
 GB
●  CONNECTIONS
CONNECTING THE FM ANTENNA
      Connect the FM antenna supplied to the FM 75 Ω COAXIAL Jack.
     Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it 
to a wall or other rigid surface.
  This unit does not receive AM broadcasts.
Cooling Fan
The cooling fan supplies cool air to the unit to  prevent overheating.
Please observe the following cautions for your safety.
Make sure the unit is well-ventilated. If the unit has poor ventilation,\
 the temperature inside the unit may rise 
and may damage it.
Do not obstruct the cooling fan or ventilation holes. (If the cooling f\
an or ventilation holes are covered with a 
newspaper or cloth, heat may build up inside the unit and fi re may result.)
1.
2.
M
•
•
FM Antenna (supplied)
H T-BD2_NOGB.indd   27HT-BD2_NOGB.indd   272007-12-6   11:47:352007-12-6   11:47:35
 
						

							
basic functions of your 
Blu-ray Home Cinema
28
BEFORE PLAYING
Turn on your TV and set it to the correct Video Input (the input the 
Blu-ray Home Cinema is connected to: HDMI, Component or Video).After plugging in the player, the fi rst time you press the 
POWER button, this screen comes up: 
If you want to select a language, press a  NUMBER button. 
(This screen will only appear when you plug in the player for 
the fi rst time.) If the language for the startup screen is not set, 
the settings may change whenever you turn the power on or 
off. Therefore, make sure that you select the language you 
want to use. Once you select a menu language, you can 
change it by pressing the  STOP (
) button on the front panel of the unit for more than 5 seconds with 
no disc in the unit. Then the  MENU LANGUAGE SELECTION  window appears again where you can 
reset your preferred language.
Discs which cannot be played on this player.
• BD-R      • BD-RE   • HD DVD       • DVD+RW
• DVD+R    • DVD-ROM  • DVD-RAM        • CDV 
• CD-ROM    • CVD    • CD-I         • 
8 cm MD (mini disc)
• Super Audio CD(except CD layer)    • CDGs play audio only, not graphics.
Ability to play back may depend on recording conditions.
• DVD-R   • CD-RW/R  • DVD-RW (V mode)
•   The unit may not play certain CD-R, CD-RW and DVD-R due to the disc type\
 or 
recording conditions.
Blu-ray Disc is a new and evolving format. Accordingly, disc compatibili\
ty issues with new 
and existing format discs are possible. Not all discs are compatible and\
 not every disc will 
playback. 
For additional information, refer to the Disc Type and Characteristics a\
nd Compliance and 
Compatibility Notice sections of this Manual. If you encounter compatibi\
lity problems, 
please contact the SAMSUNG customer care center.
The unit cannot play CD-R/-RW and DVD-RW/-R recorded content such as div\
x, avi, 
mpg, mov, wma.
•
M



!
MENU LANGUAGE SELECTION
Press 1 for English
Pulsar 2 para Español
Touche 3 pour Français
Drücken Sie 4 für Deutsch
Premere 5 per Italiano
Druk op 6 voor Nederlands
This section introduces basic playback functions and playback by disc ty\
pe.
H
T-BD2_NOGB.indd   28HT-BD2_NOGB.indd   282007-12-6   11:47:382007-12-6   11:47:38
 
						

							
29
 GB
●  BASIC FUNCTIONS
USING THE REMOTE CONTROL TO OPERATE THE BLU-RAY HOME 
CINEMA OR YOUR SAMSUNG TV
The Blu-ray Home Cinemas remote can be used to control 
Samsung TVs.
Plug the main units power cord into the AC power supply.
Press the  BD RECEIVER  button to switch to BD RECEIVER 
mode to operate the Blu-ray Home cinema.
 
Press the  FUNCTION  button on the main unit or  BD button 
on the remote to enable BD/DVD playback.
Press the  TV button to set the remote to TV mode.
Press the  POWER button to turn on your Samsung TV with this remote.
   Press the  TV/VIDEO  button to select VIDEO mode on your TV.
1.
2.
3.
4.
5.
6.
HT-BD2_NOGB.indd   29HT-BD2_NOGB.indd   292007-12-6   11:47:402007-12-6   11:47:40