Samsung Ht Bd2exr User Manual

							
40
system setup
Movie Frame (24 Fs)
Movies are usually fi lmed at 24 frames per second. Some Blu-
ray Discs have the capability of playing back at this frame rate. 
Setting the Movie Frame (24Fs) feature to ON allows you to 
adjust the Blu-ray players HDMI output to 24 frames per 
second for improved picture quality.
You can enjoy the Movie Fame (24Fs) feature solely on a TV 
supporting this frame rate.
This menu can only be selected in 1080i or 1080p HDMI 
output resolution modes.
Depending on the disc, two types of source may be included: 
Movie material (24 frame) and Video material (30 frame). When 
switching the source between Movie and Video, the screen 
may blink for a few seconds.
Resolution 
Sets the output resolution of the Component and HDMI video signal.
The number in 576i/480i, 576p/480p, 720p, 1080p and 
1080i indicates the number of lines of video. The i and p 
indicate interlace and progressive scan, respectively.
   -    1080p :   Outputs 1080 lines of progressive video.
   -   1080i :     Outputs 1080 lines of interlaced video.
   -   720p :   Outputs 720 lines of progressive video.
   -   576p/480p :   Outputs 480 lines progressive video.
   -   576i/480i :   Outputs 480 lines of interlaced video.
Component does not output 1080p.
If the connected TV does not support the movie frame 
or the selected resolution, you will see the following message:
If you select Yes and the resolution is not supported, 
the TVs screen will be blank.
 
If the screen is blank, press and hold the STOP () button on the front of the player for 
more than 5 seconds (no disc inserted). All settings are restored to t\
he factory default. 
Follow the steps on the previous page to access each mode and select the\
 Display Setup 
that your TV will support.
•
M
M
N
o D is cNo Disc
Photo
Setup
HDMI Setup
Parental Setup
System Upgrade Display Setup
Screen Message  :   On Resolution :  576p/480p
Language Setup
Audio Setup
TV Aspect  :  16:9 Wide
Movie Frame (24 Fs)  :   Off
1080p
1080i
720p
576p/480p
576i/480i
N
o D is cNo Disc
Photo
Setup
HDMI Setup
Parental Setup
System Upgrade Display Setup
Resolution :  576p/480p
Screen Message  :   On Movie Frame (24 Fs)  :   Off
Language Setup
Audio Setup
TV Aspect  :  16:9 Wide
On
Off
N
o D is cNo Disc
Photo
Setup
HDMI Setup
Parental Setup
System Upgrade Display Setup
Screen Message  :   On
Front Display  :   Automatic Resolution :  576p/480p
Language Setup
Audio Setup
TV Aspect  :  16:9 Wide
Movie Frame (24 Fs)  :   Off
1080p
1080i
720p
576p/480p
576i/480iIf no pictures are shown after the selection, 
please wait for 15 seconds. And then, 
the resolution will be reverted 
to the previous value automatically.
Would you like to make a selection?
YesNo
H
T-BD2_NOGB.indd   40HT-BD2_NOGB.indd   402007-12-6   11:48:242007-12-6   11:48:24
 
						

							
41
 GB
●  SYSTEM SETUP
Resolution according to the output mode
BD playback
Output
Setup HDMI Component VIDEO
1080p, Movie Frame(24Fs) off 1080p@60F 1080i 576i/480i
1080p/1080i, Movie Frame (24Fs) on1080p@24F 1080i 576i/480i
1080i, Movie Frame (24Fs) off 1080i 1080i 576i/480i 720p 720p 720p 576i/480i
576p/480p 576p/480p 576p/480p 576i/480i 576i/480i 576p/480p 576i/480i 576i/480i
DVD playback
Output
Setup HDMI Component VIDEO
1080p 1080p@60F 576p/480p 576i/480i 1080i 1080i 576p/480p 576i/480i720p 720p 576p/480p 576i/480i
576p/480p 576p/480p 576p/480p 576i/480i 576i/480i 576p/480p 576i/480i 576i/480i
This player has the HDMI Auto Detect Feature. When the player is fi rst connected to a TV 
via HDMI, the players output will be set automatically to HDMI.
If the HDMI Auto Detection feature does not work, you cant select the 1\
080p resolution or 
Movie Frame (24 Fs).
The BD disc must have the 24 frame feature in order to use the Movie Fra\
me (24 Fs) 
mode.
If you have both HDMI and Component cables connected to your TV, the Com\
ponent 
resolution may differ from the chart above.
In DVD playback, if both HDMI and Component jacks are connected and you \
select the 
Component mode, the Display Setup menu will show the output resolution a\
s 1080p. The 
resolution is actually 576p
/480p.
If the resolution is set to ‘I’ (ex: 576i/480i or 1080i), the ou\
tput is displayed in 30 frames per second 
and if set to ‘p’ (ex: 576p
/480p, 720p, 1080p), it will be displayed in 60 frames per second.
i : interlaced mode (30 frames)                        p : progressive\
 mode (60 frames)
Screen Message
On  : Displays messages related to operation mode.
Off  : Does not display messages related to operation mode.
•
•
M





•
•
No D is cNo Disc
Photo
Setup
HDMI Setup
Parental Setup
System Upgrade Display Setup Screen Message  :  On
On
Off
Language Setup
Audio Setup
Movie Frame (24 Fs)  :  Off
Resolution : 1080i
H
T-BD2_NOGB.indd   41HT-BD2_NOGB.indd   412007-12-6   11:48:302007-12-6   11:48:30
 
						

							
42
system setup
SETTING UP THE HDMI SETUP OPTIONS
With the unit in Stop mode, press the MENU button.
Press the 
▲▼ buttons to select  Setup, then press the 
ENTER  or 
► button.
Press the 
▲▼ buttons to select  HDMI Setup, then press 
the  ENTER  or 
► button.
HDMI setup menu will be displayed.
Press the  
▲▼ buttons to select the desired  HDMI option 
(Format or HDMI Audio), then press the  ENTER or 
► 
button.
Press the 
▲▼ buttons to select the desired sub-menu item 
from a HDMI option, then press the  ENTER button.
Press the  RETURN or \b button to return to the previous menu. Press the  MENU button to exit the menu.
Anynet+ (HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices \
with your Samsung TVs 
remote control, Anynet + can be used by connecting this Home Cinema to a\
 SAMSUNG TV using an 
HDMI Cable. (This is only available with SAMSUNG TVs that support Anyne\
t+.)
What is Anynet+?
You can operate this unit, power on your TV, or watch a movie by pressin\
g the Play button on your 
Samsung TVs remote control.
Connect the main unit of the Home Cinema to a Samsung TV with an HDMI ca\
ble. (See page 22)
Set the Anynet+ function on your TV. (See the TV instruction manual 
for more information.) You can operate the Home Cinema by using the TV remote 
control. (Available TV buttons :
 ,,,  ▲,▼ and ,\b,► 
buttons, 
 button)
If you select TV
Set the Anynet+(HDMI-CEC) function to  On on your TV.
  Receiver : On  : You can listen to audio through the Home Cinema.
  Receiver : Off  : You can listen to audio through the TV.
If you select the THEATER
Select THEATER to connector  and set the option of each items below.
View TV  : If Anynet+ (HDMI-CEC) is on and you select View TV, the 
Home Cinema will automatically switch to DIGITAL IN.
THEATER Menu  : You can access the Home Cinema menu.
THEATER Operation  : The Home Cinema disc playback information will be displayed.
Receiver : On  : You can listen to audio through the Home Cinema.
Receiver : Off  : You can listen to audio through the TV.
If you want to listen to TV sound through the Home Cinema system, connec\
t the optical cable 
from the TV to the OPTICAL 1 port of the system.
If Anynet+ (HDMI-CEC) is on and you turn off the main unit, your TV wi\
ll also turn off.
Anynet+ (HDMI-CEC) will only work while in the DVD mode.
1.
2.
3. •
4.
5.
M
1.
2.
•
•
•
•
•
•
•
•
M


MOVEENTEREXIT
MOVEENTEREXIT
N o D is cNo Disc
Photo
Setup
Parental Setup
System Upgrade HDMI Setup Audio Setup
Display Setup
HT-BD2_NOGB.indd   42HT-BD2_NOGB.indd   422007-12-6   11:48:332007-12-6   11:48:33
 
						

							
43
 GB
●  SYSTEM SETUP
Format
You can optimize the HDMI output for connection to a TV or 
Monitor.
•      TV  : Select if connected to a TV via HDMI. 
•     
Monitor  : Select if connected to a Monitor via HDMI.
    If the player is connected to a TV, the Monitor option is  
    unavailable.
HDMI Audio
The audio signals transmitted over the HDMI Cable can be 
toggled ON/OFF.
•      On :    
Both video and audio signals are transmitted over the
        HDMI  connection  cable,  and  audio  is  output  through               
    your TV speakers only.
•  Off :   Video is transmitted over the HDMI connection cable 
    only, and audio is output through the Home Cinema          
    speakers only.
  The default setting of this function is HDMI Audio Off.
  HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.M

N o D is cNo Disc
Photo
Setup
Parental Setup
System Upgrade HDMI Setup
HDMI Audio  :  On Format : TV
Audio Setup
Display Setup
TV
Monitor
N
o D is cNo Disc
Photo
Setup
Parental Setup
System Upgrade HDMI Setup HDMI Audio  :  On Audio Setup
Display Setup Format : TV
On
Off
H
T-BD2_NOGB.indd   43HT-BD2_NOGB.indd   432007-12-6   11:48:402007-12-6   11:48:40
 
						

							
44
system setup
SETTING UP THE PARENTAL LOCK
The Parental Lock function works in conjunction with BD/DVDs that have b\
een assigned a rating which helps you 
control the types of BD/DVDs that your family watches. There are up to 8\
 rating levels on a disc.
 hZ
With the unit in Stop mode, press the MENU button. 
Press the 
▲▼ buttons to select  Setup, then press the 
ENTER  or 
► button.
Press the 
▲▼ buttons to select  Parental Setup, then 
press the  ENTER or
 ► button.
When you operate your Blu-ray Home Cinema for the 
fi rst time, the “Enter New password” message will be 
displayed.
Enter the 4-digit password using the number buttons on 
the remote control.
The “Confi rm the password” message will be displayed. 
Enter your password again.
Press the  ENTER or
 ► button to select  Parental Lock.
Press the 
▲▼ buttons to select  On or  Off, then press the 
ENTER  button.
Press the  RETURN or \b button to return to the previous menu. 
Press the  MENU button to exit the menu.
If you forgot your password
Remove the disc.
Press and hold the  STOP (
) button on the front panel for 5 seconds or more.
All settings will revert to the factory settings.
1.
2.
3.
•
4.
5.
6.
M
1.
2. •
No D is cNo Disc
Photo
Setup
System Upgrade Parental SetupRating Level  :  1 (Kids)
New Password Parental Lock  :  Off
Display Setup
HDMI Setup
N
o D is cNo Disc
Photo
Setup
System Upgrade Parental Setup Display Setup
HDMI SetupParental Setup
« NUMBER  ² RETURN
Enter New password.
N o D is cNo Disc
Photo
Setup
System Upgrade Parental Setup Display Setup
HDMI SetupParental Setup
« NUMBER  ² RETURN
Confi  rm the password.
HT-BD2_NOGB.indd   44HT-BD2_NOGB.indd   442007-12-6   11:48:442007-12-6   11:48:44
 
						

							
45
 GB
●  SYSTEM SETUP
Setting the Rating Level
Press the ▲▼ buttons to select  Rating Level, then press 
the  ENTER  or
 ► button.
Press the 
▲▼ buttons to select the rating level you want, 
then press the  ENTER button. 
For example, if you select up to Level 6, discs that 
contain Level 7, 8 will not play. 
A larger number indicates that the program is intended 
for adult use only.
Level 1 is the most restrictive and Level 8 is the least.
Changing the Password
Press the ▲▼ buttons to select  New Password, then 
press the  ENTER or
 ► button.
Enter the 4-digit password using the number buttons on 
the remote control. The “Confi rm the password.” message 
will be displayed.
Enter your password again using the number buttons on 
the remote control.
1.
2. •
1.
2.
3.
N o D is cNo Disc
Photo
Setup
System Upgrade Parental Setup
New Password
Display Setup
HDMI Setup
Parental Lock  :  Off
Rating Level  :  1 (Kids)
N
o D is cNo Disc
Photo
Setup
System Upgrade Parental Setup
New Password
Display Setup
HDMI Setup
Parental Lock  :  Off
Rating Level  :  1 (Kids)Parental Setup
« NUMBER  ² RETURN
Confi
 rm the password.
No D is cNo Disc
Photo
Setup
System Upgrade Parental Setup
New Password
Display Setup
HDMI Setup
Parental Lock  :  Off
Rating Level  :  1 (Kids)Parental Setup
« NUMBER  ² RETURN
Enter New password.
N
o D is cNo Disc
Photo
Setup
System Upgrade Parental SetupNew Password
Rating Level  :  1 (Kids)
Display Setup
HDMI Setup Parental Lock  :  Off
N
o D is cNo Disc
Photo
Setup
System Upgrade Parental Setup
New Password
Rating Level  :  8 (Adults)
Display Setup
HDMI Setup Parental Lock  :  Off
8 (Adults)
7
6
5
4
3
2
1 (Kids)
H
T-BD2_NOGB.indd   45HT-BD2_NOGB.indd   452007-12-6   11:48:502007-12-6   11:48:50
 
						

							
system upgrade
46
Samsung may offer upgrades to your Blu-ray players fi rmware in the future. To upgrade this fi rmware you must :Go to samsung.com and refer to SUPPORT page to download the fi rmware and burn an update CD.
or
Connect this players LAN terminal to the LAN terminal on your modem (s\
ee page 26) and follow the steps 
below.
FIRMWARE UPGRADE
With the unit in No Disc mode, press the  MENU button.
Press the 
▲▼ buttons to select  Setup, then press the  ENTER 
or 
► button.
Press the 
▲▼ buttons to select  System Upgrade , then press 
the  ENTER  or
 ► button.
Press the 
▲▼ buttons to select  Upgrade Start, then press the 
ENTER  or
 ► button.
You will see a window that allows you to check the cable or 
network connection status.
If the upgrade is possible : You will see information on the 
current and new versions of fi rmware in a message box.
If the upgrade is not possible : You will see the following 
description in the message box.If the cable is not connected :
This system can not connect to internet for update. 
Please, check the network setup. 
If the network connection has failed :
This system can not connect to internet for update. 
Please, check the network setup
If no later version has been released (the latest version has been alre\
ady installed) : 
The latest version of the fi rmware is already installed. There is no need to update.
If there is a disc in the player :
Please maintain No Disc state for network update.
This indicates that you must remove all discs from the unit to perform t\
he update.
1.
2.
1.
2.
3.
4.
5.


•
•
•
•
No D is cNo Disc
Photo
SetupSystem UpgradeUpgrade Start
HDMI Setup
Parental Setup
System Information
Network Setup
N
o D is cNo Disc
Photo
SetupSystem UpgradeUpgrade Start
HDMI Setup
Parental Setup
System Information
Network SetupSystem UpgradeThe new update data was found.
Current Version : XXXXX
New Version : XXXXX
N
o D is cNo Disc
Photo
SetupSystem UpgradeUpgrade Start
HDMI Setup 
Parental Setup
System Information
Network Setup
OK
System UpgradeThis system can not connect
to internet for update.
Please, check the network setup.
CancelStart
N
o D is cNo Disc
Photo
SetupSystem UpgradeUpgrade Start
HDMI Setup
Parental Setup
System Information
Network SetupSystem Upgrade
Now, Checking.
Please wait...
1234
H
T-BD2_NOGB.indd   46HT-BD2_NOGB.indd   462007-12-6   11:48:592007-12-6   11:48:59
 
						

							
47
 GB
●  SYSTEM UPGRADE
To perform the system upgrade, press the \b► buttons to 
select  Start and then press the  ENTER button.
The system update gets started.
When the verifi cation is done, you will see a window that 
allows you to update fi rmware. To perform the fi rmware 
update,press the 
\b► buttons to select  Yes and then press 
the  ENTER  button.
You will see a message about the upgrade process for 
3 seconds.
- When update is fi nished, the power will turn off.
If you do not want to update fi rmware, select  No and then 
press the  ENTER button.
When the installation is done, you will see a 
“ Update Completed ” message. 
The player will automatically turn off in 3 seconds.
Please turn the player on, then press the STOP button 
5 seconds to intialize the player.
If you intialize the player, all settings will revert to the factory 
settings. You will see the menu language selection window.
If you want to cancel the upgrade while it is in process, press the  ENTER button. 
You will see a confi rmation message.
Selecting  Yes will end the upgrade process, and selecting  No will proceed with the verifi cation 
step.
When the system upgrade is done, check the fi rmware details in the System Upgrade menu. 
Do not turn off the player during the System Upgrade Otherwise, the play\
er may not work 
properly.
When software is upgraded, settings you have made will return to their d\
efault (factory) settings. 
We recommend you write down your settings so that you can easily reset t\
hem after the 
upgrade.
6.
7.
8.
•
•
9. •
•
•
M



No D is cNo Disc
Photo
SetupSystem UpgradeUpgrade Start
HDMI Setup
Parental Setup
System Information
Network SetupSystem Upgrade
Verifying update data
Please wait...
1234
N
o D is cNo Disc
Photo
SetupSystem UpgradeUpgrade Start
HDMI Setup
Parental Setup
System Information
Network SetupSystem Upgrade
Update completed.
N
o D is cNo Disc
Photo
SetupSystem UpgradeUpgrade Start
HDMI Setup
Parental Setup
System Information
Network SetupSystem Upgrade
Downloading update data...
Please, do not turn off the power.
Cancel
N
o D is cNo Disc
Photo
SetupSystem UpgradeUpgrade Start
HDMI Setup
Parental Setup
System Information
Network SetupSystem UpgradeThe new update data was found.
Current Version : XXXXX
New Version : XXXXX
CancelStart
N
o D is cNo Disc
Photo
SetupSystem UpgradeUpgrade Start
HDMI Setup
Parental Setup
System Information
Network SetupSystem Upgrade
Do you want to update Firmware?
NoYes
H
T-BD2_NOGB.indd   47HT-BD2_NOGB.indd   472007-12-6   11:49:062007-12-6   11:49:06
 
						

							
system upgrade
48
SYSTEM INFORMATION
When the fi rmware upgrade is done, check the fi rmware details by following the steps below. With the unit in Stop mode, press the  MENU button.
Press the 
▲▼ buttons to select  Setup, then press the 
ENTER  or 
► button.
Press the 
▲▼ buttons to select  System Upgrade , then 
press the  ENTER or
 ► button.
Press the 
▲▼ buttons to select  System Information , 
then press the  ENTER or
 ► button.
You can see detailed information about the current 
fi rmware. 
Press the  ENTER button to select  OK. 
System Upgrade menu will be displayed.
NETWORK SETUP
In some rare cases, the fi rmware upgrade may not succeed.
If this occurs, you may need to set up your IP address, Subnet, Mask, Ga\
teway and DNS by following the steps below.
To setup, follow steps 1 and 3 above
Press the 
▲▼ buttons to select  Network setup, then 
press the  ENTER or
 ► button.
You will see a menu that allows you to make network 
settings. 
Press the 
▲▼ buttons to select  DHCP, then press the 
ENTER  button.
If DHCP is set to On, you cant select IP Address, Subnet Mask or Gatewa\
y.
If DNS is set to Automatic, you can’t select Primary/ Secondary DNS.
1.
2.
3.
4.
•
5. •
4. •
5.M

N o D is cNo Disc
Photo
Setup
System Upgrade
Network Setup
Upgrade Start System Information
HDMI Setup
Parental Setup
N
o D is cNo Disc
Photo
Setup
System Upgrade
Network Setup
Upgrade Start System Information
HDMI Setup
Parental Setup
OK
System Information
S/W: XXXXXX_XX_XXX
Region:B/02(BD/DVD)
N o D is cNo Disc
Photo
Setup
System Upgrade
Upgrade Start Network Setup
HDMI Setup
Parental Setup System Information
N
o D is cNo Disc
Photo
Setup
System Upgrade
Upgrade Start Network Setup
HDMI Setup
Parental Setup System Information
Network Setup
 s SELECT ² RETURNSaveCancel
DHCP : On
IP Address  :  000 . 000 . 000 . 000
Subnet Mask  :  255 . 255 . 255 . 000
Gateway : 000 . 000 . 000 . 000
DNS : Automatic
Primary DNS  :  000 . 000 . 000 . 000
Secondary DNS  :  000 . 000 . 000 . 000
H
T-BD2_NOGB.indd   48HT-BD2_NOGB.indd   482007-12-6   11:49:142007-12-6   11:49:14
 
						

							
49
 GB
●  SYSTEM UPGRADE
Press the ▲▼ buttons to select a desired item, then press the  ENTER button.
If DHCP is set to Off and DNS is set to Manual
If DHCP is set to On and DNS is set to Manual
If DHCP is set to On and DNS is set to Automatic
When you select an item, use the number and  ▲▼\b► buttons.
When done, use the ▲▼ buttons to select  Save, then press the  ENTER button.
If you don’t want to save your work, use the 
▲▼\b► buttons to select  Cancel, then press the 
ENTER  button.
The IP address used in this manual is for illustrative purposes only. Yo\
u must refer to the 
your network settings for the actual IP address.
6.
•
•
•
M
7.
8.
M
Setup not available
Setup available
No D is cNo Disc
Photo
Setup
System Upgrade
Upgrade Start Network Setup
HDMI Setup
Parental Setup System Information
Network Setup
 s SELECT ² RETURNSaveCancel
DHCP : On
IP Address  :  000 . 000 . 000 . 000
Subnet Mask  :  255 . 255 . 255 . 000
Gateway : 000 . 000 . 000 . 000
DNS : Manual
Primary DNS  :  000 . 000 . 000 . 000
Secondary DNS  :  000 . 000 . 000 . 000
Setup not available
N
o D is cNo Disc
Photo
Setup
System Upgrade
Upgrade Start Network Setup
HDMI Setup
Parental Setup System Information
Network Setup
 s SELECT ² RETURNSaveCancel
DHCP : On
IP Address  :  000 . 000 . 000 . 000
Subnet Mask  :  255 . 255 . 255 . 000
Gateway : 000 . 000 . 000 . 000
DNS : Automatic
Primary DNS  :  000 . 000 . 000 . 000
Secondary DNS  :  000 . 000 . 000 . 000
Setup available
N
o D is cNo Disc
Photo
Setup
System Upgrade
Upgrade Start Network Setup
HDMI Setup
Parental Setup System Information
Network Setup
 s SELECT ² RETURNSaveCancel
DHCP : Off
IP Address  :  000 . 000 . 000 . 000
Subnet Mask  :  255 . 255 . 255 . 000
Gateway : 000 . 000 . 000 . 000
DNS : Manual
Primary DNS  :  000 . 000 . 000 . 000
Secondary DNS  :  000 . 000 . 000 . 000
H
T-BD2_NOGB.indd   49HT-BD2_NOGB.indd   492007-12-6   11:49:212007-12-6   11:49:21