Samsung Ht Bd2exr User Manual

20
connections
CONNECTING THE SPEAKERS
Position of the Blu-ray Home Cinema
Place it on a stand or cabinet shelf, or under the TV stand.
Selecting the Listening PositionThe listening position should be located about 2.5 to 3 times the distan\
ce of the TVs screen size away from the TV. 
Example :  For 32 TVs 2~2.4m (6~8feet)     
For 55 TVs 3.5~4m (11~13feet)
Front SpeakerseiPlace these speakers in front of your listening position, facing inwards\
 (about 45°) toward you.
Place the speakers so that their...

21
 GB
●  CONNECTIONS
Connecting The Speakers
   Press down the terminal tab on the back of the speaker. 
  Insert the black wire into the black terminal (–) and the red wir\
e into    
  the red (+) terminal, and then release the tab.
  Connect the connecting plugs to the back of the Blu-ray Home
  Cinema by matching the colors of the speaker plugs to the speaker
  jacks.
Use the Audio cable to connect the SUBWOOFER OUT jack of 
the main unit to the AUDIO IN jack of the subwoofer. 
1.
2.
3.
4....

22
connections
CONNECTING THE VIDEO OUT TO YOUR TV
Choose one of the three methods for connecting to a TV.
 
  METHOD 1 : HDMI ....... (Best Quality)
Connect the HDMI cable from the HDMI OUT jack on the back of the Blu-ray\
 Home Cinema to the HDMI 
IN jack on your TV.
Depending on your TV, certain HDMI output resolutions may not work.
If an HDMI cable is connected from the player to a TV, the Blu-ray Home \
Cinema’s output is set to 
HDMI automatically within 10 seconds.
If you are using the Anynet +...

23
 GB
●  CONNECTIONS
HDMI Auto Detection Function
The players video output will automatically change to HDMI mode when co\
nnecting an HDMI cable 
while power is on. For possible HDMI resolutions, see page 41.
HDMI (High Defi  nition Multimedia Interface)
HDMI is an interface that enables the digital transmission of video and \
audio data with just a single connector.Using HDMI, the Blu-ray Home Cinema transmits a digital video and audio \
signal and displays a vivid picture on a 
TV having an HDMI...

24
connections
CONNECTING AUDIO FROM EXTERNAL COMPONENTS
AUX : Connecting an External Analog Component
Analog signal components such as a VCR.      Connect AUX IN (Audio) on the main unit to the Audio Out of the extern\
al analog component.
 
Be sure to match connector colors.
 
Press the  AUX button on the remote control to select  AUX input. 
You can also use the  FUNCTION button on the main unit.
The mode switches as follows :  BD/DVD ➞ D.IN 1  ➞  D.IN 2  ➞  AUX  ➞  FM .
  
You can connect the Video...

25
 GB
●  CONNECTIONS
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-T\
op Box).
      Connect the Digital Input (OPTICAL 1 or OPTICAL 2) on the main unit to\
 the Digital Output of the 
external digital component.
  Press the  D.IN button on the remote control to select  D.IN 1 or D.IN 2  input.
You can also use the  FUNCTION button on the main unit.
The mode switches as follows :  BD/DVD ➞ D.IN 1  ➞  D.IN 2  ➞  AUX  ➞  FM .
To...

26
connections
CONNECTING TO SAMSUNGS FTP/INTERNET SITE FOR 
SOFTWARE UPGRADES
Using the Direct LAN Cable (UTP cable), connect the LAN terminal on th\
e rear of the Blu-ray Home Cinema to 
the LAN terminal of your modem.  Connect to the Internet for future software upgrades.
See pages 46~49 for the Software Upgrade procedure.
•M
H
T-BD2_NOGB.indd   26HT-BD2_NOGB.indd   262007-12-6   11:47:332007-12-6   11:47:33
 

27
 GB
●  CONNECTIONS
CONNECTING THE FM ANTENNA
      Connect the FM antenna supplied to the FM 75 Ω COAXIAL Jack.
     Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it 
to a wall or other rigid surface.
  This unit does not receive AM broadcasts.
Cooling Fan
The cooling fan supplies cool air to the unit to  prevent overheating.
Please observe the following cautions for your safety.
Make sure the unit is well-ventilated. If the unit has poor...

basic functions of your 
Blu-ray Home Cinema
28
BEFORE PLAYING
Turn on your TV and set it to the correct Video Input (the input the 
Blu-ray Home Cinema is connected to: HDMI, Component or Video).After plugging in the player, the fi rst time you press the 
POWER button, this screen comes up: 
If you want to select a language, press a  NUMBER button. 
(This screen will only appear when you plug in the player for 
the fi rst time.) If the language for the startup screen is not set, 
the settings may change...

29
 GB
●  BASIC FUNCTIONS
USING THE REMOTE CONTROL TO OPERATE THE BLU-RAY HOME 
CINEMA OR YOUR SAMSUNG TV
The Blu-ray Home Cinemas remote can be used to control 
Samsung TVs.
Plug the main units power cord into the AC power supply.
Press the  BD RECEIVER  button to switch to BD RECEIVER 
mode to operate the Blu-ray Home cinema.
 
Press the  FUNCTION  button on the main unit or  BD button 
on the remote to enable BD/DVD playback.
Press the  TV button to set the remote to TV mode.
Press the  POWER button...